다중혈관 관상동맥 환자에서 y-문합을 이용하여 양쪽 내흉동맥만을 사용한 우회술의 조기 성적

We present a comprehensive, up-to-date compilation of band parameters for the technologically important III–V zinc blende and wurtzite compound semiconductors: GaAs, GaSb, GaP, GaN, AlAs, AlSb, AlP, AlN, InAs, InSb, InP, and InN, along with their ternary and quaternary alloys. Based on a review of the existing literature, complete and consistent parameter sets are given for all materials. Emphasizing the quantities required for band structure calculations, we tabulate the direct and indirect energy gaps, spin-orbit, and crystal-field splittings, alloy bowing parameters, effective masses for electrons, heavy, light, and split-off holes, Luttinger parameters, interband momentum matrix elements, and deformation potentials, including temperature and alloy-composition dependences where available. Heterostructure band offsets are also given, on an absolute scale that allows any material to be aligned relative to any other.

Band parameters for III–V compound semiconductors and their alloys

We present a comprehensive and up-to-date compilation of band parameters for all of the nitrogen-containing III–V semiconductors that have been investigated to date. The two main classes are: (1) “conventional” nitrides (wurtzite and zinc-blende GaN, InN, and AlN, along with their alloys) and (2) “dilute” nitrides (zinc-blende ternaries and quaternaries in which a relatively small fraction of N is added to a host III–V material, e.g., GaAsN and GaInAsN). As in our more general review of III–V semiconductor band parameters [I. Vurgaftman et al., J. Appl. Phys. 89, 5815 (2001)], complete and consistent parameter sets are recommended on the basis of a thorough and critical review of the existing literature. We tabulate the direct and indirect energy gaps, spin-orbit and crystal-field splittings, alloy bowing parameters, electron and hole effective masses, deformation potentials, elastic constants, piezoelectric and spontaneous polarization coefficients, as well as heterostructure band offsets. Temperature an...

Band parameters for nitrogen-containing semiconductors

In the past several years, research in each of the wide‐band‐gap semiconductors, SiC, GaN, and ZnSe, has led to major advances which now make them viable for device applications. The merits of each contender for high‐temperature electronics and short‐wavelength optical applications are compared. The outstanding thermal and chemical stability of SiC and GaN should enable them to operate at high temperatures and in hostile environments, and also make them attractive for high‐power operation. The present advanced stage of development of SiC substrates and metal‐oxide‐semiconductor technology makes SiC the leading contender for high‐temperature and high‐power applications if ohmic contacts and interface‐state densities can be further improved. GaN, despite fundamentally superior electronic properties and better ohmic contact resistances, must overcome the lack of an ideal substrate material and a relatively advanced SiC infrastructure in order to compete in electronics applications. Prototype transistors have been fabricated from both SiC and GaN, and the microwave characteristics and high‐temperature performance of SiC transistors have been studied. For optical emitters and detectors, ZnSe, SiC, and GaN all have demonstrated operation in the green, blue, or ultraviolet (UV) spectra. Blue SiC light‐emitting diodes (LEDs) have been on the market for several years, joined recently by UV and blue GaN‐based LEDs. These products should find wide use in full color display and other technologies. Promising prototype UV photodetectors have been fabricated from both SiC and GaN. In laser development, ZnSe leads the way with more sophisticated designs having further improved performance being rapidly demonstrated. If the low damage threshold of ZnSe continues to limit practical laser applications, GaN appears poised to become the semiconductor of choice for short‐wavelength lasers in optical memory and other applications. For further development of these materials to be realized, doping densities (especially p type) and ohmic contact technologies have to be improved. Economies of scale need to be realized through the development of larger SiC substrates. Improved substrate materials, ideally GaN itself, need to be aggressively pursued to further develop the GaN‐based material system and enable the fabrication of lasers. ZnSe material quality is already outstanding and now researchers must focus their attention on addressing the short lifetimes of ZnSe‐based lasers to determine whether the material is sufficiently durable for practical laser applications. The problems related to these three wide‐band‐gap semiconductor systems have moved away from materials science toward the device arena, where their technological development can rapidly be brought to maturity.

Large‐band‐gap SiC, III‐V nitride, and II‐VI ZnSe‐based semiconductor device technologies

Industries such as the automotive, aerospace or military, as well as environmental and biological research have promoted the development of ultraviolet (UV) photodetectors capable of operating at high temperatures and in hostile environments. UV-enhanced Si photodiodes are hence giving way to a new generation of UV detectors fabricated from wide-bandgap semiconductors, such as SiC, diamond, III-nitrides, ZnS, ZnO, or ZnSe. This paper provides a general review of latest progresses in wide-bandgap semiconductor photodetectors.

https://iopscience.iop.org/article/10.1088/0268-1242/18/4/201/pdf

Wide-bandgap semiconductor ultraviolet photodetectors

Erratum: “Thermal performance of GaInSb quantum well lasers for silicon photonics applications” [Appl. Phys. Lett. 118, 101105 (2021)]

Mid-infrared lasers are crucial devices to enable optical spectroscopy in this spectral region of strategic importance for molecular sensing. In this presentation, we will review our recent progress in mid-infrared sources based on interband cascade active regions for operation in the L-band (wavelength of $\sim 3.4\mu\mathrm{m}$ ) and in particular towards the demonstration of VCSELs, the most promising laser embodiment for energy-efficient portable tunable sources.

/pdf/progress-in-interband-cascade-lasers-from-edge-emitting-4ropu52t86.pdf

Progress in Interband Cascade Lasers: From Edge Emitting Lasers to VCSELs

Anisotropic strain relaxation and growth mode dependence in highly lattice mismatched III-V systems

We review our work in the field of short-wave infrared and mid-infrared photonic integrated circuits for applications in spectroscopic sensing systems. Passive silicon waveguide circuits, GeSn photodetectors, the integration of III-V and IV-VI semiconductors on these circuits, and silicon nonlinear optics are discussed.

/pdf/long-wavelength-iii-v-silicon-photonic-integrated-circuits-q3kru7z3yv.pdf

Long-wavelength III-V/silicon photonic integrated circuits

We report on a monolithic Sb-based Vertical Cavity Surface Emitting Laser operating at CW up to 70°C. The structure is made of two AlAsSb/GaSb mirrors, type-I InGaAsSb/AlGaAsSb wells and an InAs/GaSb tunnel junction. By selectively under-etching this tunnel junction, we improve the VCSEL performances and demonstrate low threshold current and high temperature continuous wave operation.

Eric Tournié

Papers

Erratum: “Thermal performance of GaInSb quantum well lasers for silicon photonics applications” [Appl. Phys. Lett. 118, 101105 (2021)]

Progress in Interband Cascade Lasers: From Edge Emitting Lasers to VCSELs

Anisotropic strain relaxation and growth mode dependence in highly lattice mismatched III-V systems

Long-wavelength III-V/silicon photonic integrated circuits

High temperature continuous wave operation of Sb-based monolithic EP-VCSEL with selectively etched tunnel-junction apertures