scispace - formally typeset
Journal ArticleDOI

Oriented ZnO thin films synthesis by sol–gel process for laser application

TLDR
In this paper, a systematic study of the key parameters that influence the texture and preferential orientation of films deposited by sol-gel procedures (precursor, solvent and additive nature and concentration, coating and heat treatment conditions).
About
This article is published in Thin Solid Films.The article was published on 2003-03-20. It has received 294 citations till now. The article focuses on the topics: Texture (crystalline) & Thin film.

read more

Citations
More filters
Journal ArticleDOI

Sol–gel-deposited ZnO thin films: A review

TL;DR: In this article, the main chemical routes used in the sol-gel synthesis of undoped ZnO thin films and highlights the chemical and physical parameters influencing their structural properties are summarized.
Journal ArticleDOI

Bulk Synthesis of Transparent and Homogeneous Polymeric Hybrid Materials with ZnO Quantum Dots and PMMA

TL;DR: In situ sol-gel polymerization is demonstrated for fabricating transparent poly(methyl methacrylate) (PMMA)-ZnO quantum dot (QD)- hybrid materials in bulk dimension as mentioned in this paper.
Journal ArticleDOI

The effects of zinc nitrate, zinc acetate and zinc chloride precursors on investigation of structural and optical properties of ZnO thin films

TL;DR: In this paper, structural and optical properties of ZnO thin films were investigated by X-ray diffraction (XRD), scanning electron microscope (SEM) and optical transmittance spectra.
Journal ArticleDOI

Optical and Structural Properties of ZnO Thin Films Fabricated by Sol-Gel Method

TL;DR: In this paper, a hexagonal wurtzite structure was obtained for hexagonal ZnO thin films with lattice constants a = b = 3.260 A, c = 5.214 A, and the optical band gap energy of the thin films was found to be direct allowed transition 3.24 eV.
Journal ArticleDOI

Effect of preheating and annealing temperatures on quality characteristics of ZnO thin film prepared by sol–gel method

TL;DR: In this article, the relationship between the heat treatment temperatures (preheating temperature and annealing temperature) and the quality characteristics of ZnO piezoelectric thin films (c-axis orientation, residual stress, grain size, roughness and resistivity) was investigated.
References
More filters
Book

Infrared and Raman Spectra of Inorganic and Coordination Compounds

TL;DR: In this article, the normal modes of vibration are illustrated and corresponding vibrational frequencies are listed for each type, including diatomic, triatomic, fouratomic, five-atomic, six-atomic and seven-atomic types.
Journal ArticleDOI

Electron–electron and electron‐hole interactions in small semiconductor crystallites: The size dependence of the lowest excited electronic state

TL;DR: In this paper, the excited electronic states of semiconductor crystallites sufficiently small (∼50 A diam) that the electronic properties differ from those of bulk materials were modeled, and an approximate formula was given for the lowest excited electronic state energy.
Journal ArticleDOI

Room-temperature ultraviolet laser emission from self-assembled ZnO microcrystallite thin films

TL;DR: In this article, room-temperature ultraviolet (UV) laser emission of ZnO microcrystallite thin films is reported, which represents an important step towards the development of nanometer photoelectronics.
Journal ArticleDOI

Semiconductor clusters in the sol-gel process: quantized aggregation, gelation, and crystal growth in concentrated zinc oxide colloids

TL;DR: In this article, a new synthesis of ZnO wurtzite clusters (crystallite sizes 3-6 nm) was presented, employing ultrasound, allowing one to produce relatively highly concentrated 0.1 M Q-ZnO colloids within a few minutes.
Related Papers (5)