Showing papers on "Redox published in 2017"

Type I and Type II Photosensitized Oxidation Reactions: Guidelines and Mechanistic Pathways

Abstract: Here, 10 guidelines are presented for a standardized definition of type I and type II photosensitized oxidation reactions. Because of varied notions of reactions mediated by photosensitizers, a checklist of recommendations is provided for their definitions. Type I and type II photoreactions are oxygen-dependent and involve unstable species such as the initial formation of radical cation or neutral radicals from the substrates and/or singlet oxygen (1 O21 ∆g ) by energy transfer to molecular oxygen. In addition, superoxide anion radical (O2·-) can be generated by a charge-transfer reaction involving O2 or more likely indirectly as the result of O2 -mediated oxidation of the radical anion of type I photosensitizers. In subsequent reactions, O2·- may add and/or reduce a few highly oxidizing radicals that arise from the deprotonation of the radical cations of key biological targets. O2·- can also undergo dismutation into H2 O2 , the precursor of the highly reactive hydroxyl radical (·OH) that may induce delayed oxidation reactions in cells. In the second part, several examples of type I and type II photosensitized oxidation reactions are provided to illustrate the complexity and the diversity of the degradation pathways of mostly relevant biomolecules upon one-electron oxidation and singlet oxygen reactions.

Tracking Catalyst Redox States and Reaction Dynamics in Ni-Fe Oxyhydroxide Oxygen Evolution Reaction Electrocatalysts: The Role of Catalyst Support and Electrolyte pH.

Abstract: Ni–Fe oxyhydroxides are the most active known electrocatalysts for the oxygen evolution reaction (OER) in alkaline electrolytes and are therefore of great scientific and technological importance in the context of electrochemical energy conversion. Here we uncover, investigate, and discuss previously unaddressed effects of conductive supports and the electrolyte pH on the Ni–Fe(OOH) catalyst redox behavior and catalytic OER activity, combining in situ UV–vis spectro-electrochemistry, operando electrochemical mass spectrometry (DEMS), and in situ cryo X-ray absorption spectroscopy (XAS). Supports and pH > 13 strongly enhanced the precatalytic voltammetric charge of the Ni–Fe oxyhydroxide redox peak couple, shifted them more cathodically, and caused a 2–3-fold increase in the catalytic OER activity. Analysis of DEMS-based faradaic oxygen efficiency and electrochemical UV–vis traces consistently confirmed our voltammetric observations, evidencing both a more cathodic O2 release and a more cathodic onset of Ni...

Coupling between oxygen redox and cation migration explains unusual electrochemistry in lithium-rich layered oxides

Abstract: Lithium-rich layered transition metal oxide positive electrodes offer access to anion redox at high potentials, thereby promising high energy densities for lithium-ion batteries. However, anion redox is also associated with several unfavorable electrochemical properties, such as open-circuit voltage hysteresis. Here we reveal that in Li1.17-x Ni0.21Co0.08Mn0.54O2, these properties arise from a strong coupling between anion redox and cation migration. We combine various X-ray spectroscopic, microscopic, and structural probes to show that partially reversible transition metal migration decreases the potential of the bulk oxygen redox couple by > 1 V, leading to a reordering in the anionic and cationic redox potentials during cycling. First principles calculations show that this is due to the drastic change in the local oxygen coordination environments associated with the transition metal migration. We propose that this mechanism is involved in stabilizing the oxygen redox couple, which we observe spectroscopically to persist for 500 charge/discharge cycles.

Reversible multi-electron redox chemistry of π-conjugated N-containing heteroaromatic molecule-based organic cathodes

Abstract: Even though organic molecules with well-designed functional groups can be programmed to have high electron density per unit mass, their poor electrical conductivity and low cycle stability limit their applications in batteries. Here we report a facile synthesis of π-conjugated quinoxaline-based heteroaromatic molecules (3Q) by condensation of cyclic carbonyl molecules with o-phenylenediamine. 3Q features a number of electron-deficient pyrazine sites, where multiple redox reactions take place. When hybridized with graphene and coupled with an ether-based electrolyte, an organic cathode based on 3Q molecules displays a discharge capacity of 395 mAh g−1 at 400 mA g−1 (1C) in the voltage range of 1.2–3.9 V and a nearly 70% capacity retention after 10,000 cycles at 8 A g−1. It also exhibits a capacity of 222 mAh g−1 at 20C, which corresponds to 60% of the initial specific capacity. Our results offer evidence that heteroaromatic molecules with multiple redox sites are promising in developing high-energy-density, long-cycle-life organic rechargeable batteries. Organic compounds can be used as electrode materials for Li-ion batteries, but problems such as facile dissolution and low electrical conductivity hinder their application. Here the authors report π-conjugated quinoxaline-based heteroaromatic molecules with multiple redox sites to tackle the problems.

Identification of catalytic sites in cobalt-nitrogen-carbon materials for the oxygen reduction reaction

Abstract: Single-atom catalysts with full utilization of metal centers can bridge the gap between molecular and solid-state catalysis. Metal-nitrogen-carbon materials prepared via pyrolysis are promising single-atom catalysts but often also comprise metallic particles. Here, we pyrolytically synthesize a Co–N–C material only comprising atomically dispersed cobalt ions and identify with X-ray absorption spectroscopy, magnetic susceptibility measurements and density functional theory the structure and electronic state of three porphyrinic moieties, CoN4C12, CoN3C10,porp and CoN2C5. The O2 electro-reduction and operando X-ray absorption response are measured in acidic medium on Co–N–C and compared to those of a Fe–N–C catalyst prepared similarly. We show that cobalt moieties are unmodified from 0.0 to 1.0 V versus a reversible hydrogen electrode, while Fe-based moieties experience structural and electronic-state changes. On the basis of density functional theory analysis and established relationships between redox potential and O2-adsorption strength, we conclude that cobalt-based moieties bind O2 too weakly for efficient O2 reduction. Nitrogen-doped carbon materials with atomically dispersed iron or cobalt are promising for catalytic use. Here, the authors show that cobalt moieties have a higher redox potential, bind oxygen more weakly and are less active toward oxygen reduction than their iron counterpart, despite similar coordination.

Extracellular polymeric substances are transient media for microbial extracellular electron transfer

Abstract: Microorganisms exploit extracellular electron transfer (EET) in growth and information exchange with external environments or with other cells. Every microbial cell is surrounded by extracellular polymeric substances (EPS). Understanding the roles of three-dimensional (3D) EPS in EET is essential in microbiology and microbial exploitation for mineral bio-respiration, pollutant conversion, and bioenergy production. We have addressed these challenges by comparing pure and EPS-depleted samples of three representative electrochemically active strains viz Gram-negative Shewanella oneidensis MR-1, Gram-positive Bacillus sp. WS-XY1, and yeast Pichia stipites using technology from electrochemistry, spectroscopy, atomic force microscopy, and microbiology. Voltammetry discloses redox signals from cytochromes and flavins in intact MR-1 cells, whereas stronger signals from cytochromes and additional signals from both flavins and cytochromes are found after EPS depletion. Flow cytometry and fluorescence microscopy substantiated by N-acetylglucosamine and electron transport system activity data showed less than 1.5% cell damage after EPS extraction. The electrochemical differences between normal and EPS-depleted cells therefore originate from electrochemical species in cell walls and EPS. The 35 ± 15-nm MR-1 EPS layer is also electrochemically active itself, with cytochrome electron transfer rate constants of 0.026 and 0.056 s-1 for intact MR-1 and EPS-depleted cells, respectively. This surprisingly small rate difference suggests that molecular redox species at the core of EPS assist EET. The combination of all the data with electron transfer analysis suggests that electron "hopping" is the most likely molecular mechanism for electrochemical electron transfer through EPS.

A Neutral pH Aqueous Organic–Organometallic Redox Flow Battery with Extremely High Capacity Retention

Abstract: We demonstrate an aqueous organic and organometallic redox flow battery utilizing reactants composed of only earth-abundant elements and operating at neutral pH. The positive electrolyte contains bis((3-trimethylammonio)propyl)ferrocene dichloride, and the negative electrolyte contains bis(3-trimethylammonio)propyl viologen tetrachloride; these are separated by an anion-conducting membrane passing chloride ions. Bis(trimethylammoniopropyl) functionalization leads to ∼2 M solubility for both reactants, suppresses higher-order chemical decomposition pathways, and reduces reactant crossover rates through the membrane. Unprecedented cycling stability was achieved with capacity retention of 99.9943%/cycle and 99.90%/day at a 1.3 M reactant concentration, increasing to 99.9989%/cycle and 99.967%/day at 0.75–1.00 M; these represent the highest capacity retention rates reported to date versus time and versus cycle number. We discuss opportunities for future performance improvement, including chemical modification...

Evidence for anionic redox activity in a tridimensional-ordered Li-rich positive electrode β-Li2IrO3.

Abstract: Lithium-ion battery cathode materials have relied on cationic redox reactions until the recent discovery of anionic redox activity in Li-rich layered compounds which enables capacities as high as 300 mAh g-1. In the quest for new high-capacity electrodes with anionic redox, a still unanswered question was remaining regarding the importance of the structural dimensionality. The present manuscript provides an answer. We herein report on a β-Li2IrO3 phase which, in spite of having the Ir arranged in a tridimensional (3D) framework instead of the typical two-dimensional (2D) layers seen in other Li-rich oxides, can reversibly exchange 2.5 e- per Ir, the highest value ever reported for any insertion reaction involving d-metals. We show that such a large activity results from joint reversible cationic (Mn+) and anionic (O2)n- redox processes, the latter being visualized via complementary transmission electron microscopy and neutron diffraction experiments, and confirmed by density functional theory calculations. Moreover, β-Li2IrO3 presents a good cycling behaviour while showing neither cationic migration nor shearing of atomic layers as seen in 2D-layered Li-rich materials. Remarkably, the anionic redox process occurs jointly with the oxidation of Ir4+ at potentials as low as 3.4 V versus Li+/Li0, as equivalently observed in the layered α-Li2IrO3 polymorph. Theoretical calculations elucidate the electrochemical similarities and differences of the 3D versus 2D polymorphs in terms of structural, electronic and mechanical descriptors. Our findings free the structural dimensionality constraint and broaden the possibilities in designing high-energy-density electrodes for the next generation of Li-ion batteries.

Requirements for reversible extra-capacity in Li-rich layered oxides for Li-ion batteries

Abstract: The structural stability and the redox mechanism of Li-rich layered oxides (LLOs) are two very important aspects for high energy density. The former is related to the irreversible loss of lattice oxygen and capacity fading during cycling, while the latter determines the overall capacity of the materials. This paper aims at clarifying the factors governing the structural stability, the extra capacity and the redox mechanism of LLOs upon Li-removal. The results show that the structural stability against oxygen vacancy formation is improved with increasing M–O covalency, while it decreases with increasing d-shell electron number and with electrochemical extraction of lithium from the lattice. The redox mechanism of Li2−xMO3 electrodes formed by 3d metals or by heavier metals with a d0 electronic configuration is related to the electron depletion from the oxygen lone-pairs (localized non-bonding O(2p) states) leading to an irreversible anionic redox ending with the reductive elimination of O2 upon cycling. For these phases, long-term cycling is predicted to be very unlikely due to the irreversible loss of lattice oxygen upon charging. For the electrodes formed by 4d and 5d metals with intermediate dn electronic configurations, reversible cationic and anionic redox activities are predicted, therefore enabling reversible extra-capacities. The very different redox mechanisms exhibited by Li2−xMO3 electrodes are then linked to the delicate balance between the Coulomb repulsions (U term) and the M–O bond covalency (Δ term) through the general description of charge-transfer vs. Mott–Hubbard insulators. The present findings will provide a uniform guideline for tuning the band structures of Li2MO3 phases and thus activating desired redox mechanisms, being beneficial for the design of high-energy density electrode materials for Li-ion battery applications.

Towards identifying the active sites on RuO2(110) in catalyzing oxygen evolution

Abstract: While the surface atomic structure of RuO2 has been well studied in ultra high vacuum, much less is known about the interaction between water and RuO2 in aqueous solution. In this work, in situ surface X-ray scattering measurements combined with density functional theory (DFT) were used to determine the surface structural changes on single-crystal RuO2(110) as a function of potential in acidic electrolyte. The redox peaks at 0.7, 1.1 and 1.4 V vs. reversible hydrogen electrode (RHE) could be attributed to surface transitions associated with the successive deprotonation of –H2O on the coordinatively unsaturated Ru sites (CUS) and hydrogen adsorbed to the bridging oxygen sites. At potentials relevant to the oxygen evolution reaction (OER), an –OO species on the Ru CUS sites was detected, which was stabilized by a neighboring –OH group on the Ru CUS or bridge site. Combining potential-dependent surface structures with their energetics from DFT led to a new OER pathway, where the deprotonation of the –OH group used to stabilize –OO was found to be rate-limiting.

Copper-substituted Na0.67Ni0.3−xCuxMn0.7O2 cathode materials for sodium-ion batteries with suppressed P2–O2 phase transition

Abstract: P2-type sodium layered oxides NaxMO2 (M = transition metal) are considered as one kind of promising cathode material for sodium-ion batteries because of their known structures, superior electrochemical properties, and their ease of synthesis. The Ni2+/Ni3+ and Ni3+/Ni4+ redox reactions endow the P2–Na2/3Ni1/3Mn2/3O2 electrode with a relatively high operating voltage and high specific capacity. However, the phase transition from P2 to O2 and Na+/vacancy ordering make P2–Na2/3Ni1/3Mn2/3O2 susceptible to severe voltage and capacity decay. Herein, we propose to employ the electrochemically active copper(II) as a unique substituent to stabilize the P2 phase, forming Na0.67Ni0.3−xCuxMn0.7O2 (x = 0, 0.1, 0.2 and 0.3). Our work highlights the importance of Cu(II) in the structural engineering of high performance cathode materials, whose existence can not only stabilize the P2 phase against the notorious phase transition, but also contribute to the rechargeable capacity due to the high potential Cu2+/Cu3+ redox. We identified that the cathode formulated as P2-type Na0.67Ni0.1Cu0.2Mn0.7O2 shows favorable battery performance with much-alleviated structural degradation.

Mixed Conducting Perovskite Materials as Superior Catalysts for Fast Aqueous-Phase Advanced Oxidation: A Mechanistic Study

Abstract: A mixed ionic–electronic conducting (MIEC) double perovskite, PrBaCo2O5+δ (PBC), was synthesized and evaluated as the heterogeneous catalyst to generate radicals from peroxymonosulfate (PMS) for the oxidative degradation of organic wastes in aqueous solution. A superior catalytic activity was obtained for PBC, which was much higher than that of the most popular Co3O4 nanocatalyst. More importantly, a detailed mechanism of PMS activation on the MIEC perovskite was proposed. Electron paramagnetic resonance (EPR) and radical competitive reactions suggested that both sulfate radicals (SO4•–) and hydroxyl radicals (•OH) participated in and played important roles in the catalytic oxidation processes. Oxygen temperature-programmed desorption (O2-TPD) demonstrated that the PBC perovskite oxide is capable of facilitating an easier valence-state change of the B-site cation (cobalt ions) to mediate a redox process. Additionally, the oxygen vacancies could facilitate the bonding with PMS molecules and promote the rea...

Recent Advances in Organic Reactions Involving Elemental Sulfur

Abstract: Elemental sulfur has been known since Antiquity and found widespread applications in the preparation of black gunpowder, the synthesis of sulfuric acid as well as other sulfur-containing compounds, and the vulcanization of rubber. Over the last several years, we have come to better understand its properties and discover more applications of elemental sulfur in synthetic organic chemistry. This review summarizes the advances from 2000 in the construction of organic molecules using elemental sulfur via sulfuration, oxidation, reduction and redox condensation processes.

Anionic Redox in Rechargeable Lithium Batteries.

Abstract: The extraordinarily high capacities delivered by lithium-rich oxide cathodes, compared with conventional layered oxide electrodes, are a result of contributions from both cationic and anionic redox processes. This phenomenon has invoked a lot of research exploring new kinds of lithium-rich oxides with multiple-electron redox processes. Though proposed many years ago, anionic redox is now regarded to be crucial in further developing high-capacity electrodes. A basic overview of the previous work on anionic redox is given, and issues related to electronic and geometric structures are discussed, including the principles of activation, reversibility, and the energy barrier of anionic redox. Anionic redox also leads to capacity loss and structural degradation, as well as voltage hysteresis, which shows the importance of controlling anionic redox reactions. Finally, the techniques used for characterizing anionic redox processes are reviewed to aid the rational choice of techniques in future studies. Important perspectives are highlighted, which should instruct future work concerning anionic redox processes.

An overview of electron acceptors in microbial fuel cells

Abstract: Microbial fuel cells (MFC) have recently received increasing attention due to their promising potential in sustainable wastewater treatment and contaminant removal. In general, contaminants can be removed either as an electron donor via microbial catalyzed oxidization at the anode or removed at the cathode as electron acceptors through reduction. Some contaminants can also function as electron mediators at the anode or cathode. While previous studies have done a thorough assessment of electron donors, cathodic electron acceptors and mediators have not been as well described. Oxygen is widely used as an electron acceptor due to its high oxidation potential and ready availability. Recent studies, however, have begun to assess the use of different electron acceptors because of the (1) diversity of redox potential, (2) needs of alternative and more efficient cathode reaction, and (3) expanding of MFC based technologies in different areas. The aim of this review was to evaluate the performance and applicability of various electron acceptors and mediators used in MFCs. This review also evaluated the corresponding performance, advantages and disadvantages, and future potential applications of select electron acceptors (e.g., nitrate, iron, copper, perchlorate) and mediators.

Enhancing CO2 electrolysis through synergistic control of non-stoichiometry and doping to tune cathode surface structures

Abstract: Sustainable future energy scenarios require significant efficiency improvements in both electricity generation and storage. High-temperature solid oxide cells, and in particular carbon dioxide electrolysers, afford chemical storage of available electricity that can both stabilize and extend the utilization of renewables. Here we present a double doping strategy to facilitate CO2 reduction at perovskite titanate cathode surfaces, promoting adsorption/activation by making use of redox active dopants such as Mn linked to oxygen vacancies and dopants such as Ni that afford metal nanoparticle exsolution. Combined experimental characterization and first-principle calculations reveal that the adsorbed and activated CO2 adopts an intermediate chemical state between a carbon dioxide molecule and a carbonate ion. The dual doping strategy provides optimal performance with no degradation being observed after 100 h of high-temperature operation and 10 redox cycles, suggesting a reliable cathode material for CO2 electrolysis.

Anthraquinone Derivatives in Aqueous Flow Batteries

Abstract: Anthraquinone derivatives are being considered for large scale energy storage applications because of their chemical tunability and rapid redox kinetics. The authors investigate four anthraquinone derivatives as negative electrolyte candidates for an aqueous quinone-bromide redox flow battery: anthraquinone-2-sulfonic acid (AQS), 1,8-dihydroxyanthraquinone-2,7-disulfonic acid (DHAQDS), alizarin red S (ARS), and 1,4-dihydroxyanthraquinone-2,3-dimethylsulfonic acid (DHAQDMS). The standard reduction potentials are all lower than that of anthraquinone-2,7-disulfonic acid (AQDS), the molecule used in previous quinone-bromide batteries. DHAQDS and ARS undergo irreversible reactions on contact with bromine, which precludes their use against bromine but not necessarily against other electrolytes. DHAQDMS is apparently unreactive with bromine but cannot be reversibly reduced, whereas AQS is stable against bromine and stable upon reduction. The authors demonstrate an AQS-bromide flow cell with higher open circuit potential and peak galvanic power density than the equivalent AQDS-bromide cell. This study demonstrates the use of chemical synthesis to tailor organic molecules for improving flow battery performance.

A high-performance all-metallocene-based, non-aqueous redox flow battery

Abstract: Here, a class of organometallic compounds, metallocenes, are explored to serve as both catholyte and anolyte redox species for non-aqueous lithium-based redox flow battery (Li-RFB) applications. The prototype of all-metallocene-based Li-RFB exploits ferrocene (FeCp2) and cobaltocene (CoCp2) as the redox-active cathode and anode, respectively. The reaction rate constants of metallocenes are determined to be as high as 10−3 cm s−1, two orders greater than most redox-active materials applied in conventional redox flow batteries. This designed Li-RFB yields a working potential of 1.7 V, and by introduction of methyl groups on the ligand rings of CoCp2, the working potential can be further increased to 2.1 V. The fabricated full cell shows capacity retention of over 99% per cycle with a coulombic efficiency (CE) of >95% and an energy efficiency of >85%. These results demonstrate a generic design route towards high performance non-aqueous RFBs via rational screening and functionalization of metallocenes.

Sensitization‐Initiated Electron Transfer for Photoredox Catalysis

Abstract: Photosynthetic organisms exploit antenna chromophores to absorb light and transfer excitation energy to the reaction center where redox reactions occur. In contrast, in visible-light chemical photoredox catalysis, a single species (i.e., the photoredox catalyst) absorbs light and performs the redox chemistry. Mimicking the energy flow of the biological model, we report a two-center photoredox catalytic approach in which the tasks of light energy collection and electron transfer (i.e., redox reactions) are assigned to two different molecules. Ru(bpy)3 Cl2 absorbs the visible light and transfers the energy to polycyclic aromatic hydrocarbons that enable the redox reactions. This operationally simple sensitization-initiated electron transfer enables the use of arenes that do not absorb visible light, such as anthracene or pyrene, for photoredox applications. We demonstrate the merits of this approach by the reductive activation of chemical bonds with high reduction potentials for carbon-carbon and carbon-heteroatom bond formations.

An All-Organic Proton Battery

Abstract: Rechargeable batteries that use organic matter as the capacity-carrying material have previously been considered a technology for the future. Earlier batteries in which both the anode and cathode consisted of organic material required significant amounts of conductive additives and were often based on metal-ion electrolytes containing Li+ or Na+. However, we have used conducting poly(3,4-ethylenedioxythiophene) (PEDOT), functionalized with anthraquinone (PEDOT-AQ) or benzonquinone (PEDOT-BQ) pendant groups as the negative and positive electrode materials, respectively, to make an all-organic proton battery devoid of metals. The electrolyte consists of a proton donor and acceptor slurry containing substituted pyridinium triflates and the corresponding pyridine base. This slurry allows the 2e–/2H+ quinone/hydroquinone redox reactions while suppressing proton reduction in the battery cell. By using strong (acidic) proton donors, the formal potential of the quinone redox reactions is tuned into the potential ...

Redox‐Active Metal Complexes for Anticancer Therapy

Abstract: The redox properties of both metals and ligands in transition metal complexes offer unusual routes for new mechanisms of anticancer therapy. Metal complexes can introduce artificial reductive and oxidative stress into cancer cells, including behavior as photoactivatable agents and catalysts. Relatively inert metal complexes (“prodrugs”) can be activated by redox processes within cancer cells. Examples of pharmaceuticals activated by bioreduction include three PtIV and two RuIII compounds that have already entered clinical trials. More recently, novel CoIII, FeIII, PtIV, Ru(III/II), OsII, and IrIII complexes have been reported to exhibit redox-mediated anticancer activity. Redox activation strategies can introduce new methods to increase cancer cell selectivity and combat drug resistance. Using combination therapy together with redox modulators to increase potency is also possible. This essay focuses on metal complexes that are activated in the reducing environment of cancer cells.

“Wine-Dark Sea” in an Organic Flow Battery: Storing Negative Charge in 2,1,3-Benzothiadiazole Radicals Leads to Improved Cyclability

Abstract: Redox-active organic materials (ROMs) have shown great promise for redox flow battery applications but generally encounter limited cycling efficiency and stability at relevant redox material concentrations in nonaqueous systems. Here we report a new heterocyclic organic anolyte molecule, 2,1,3-benzothiadiazole, that has high solubility, a low redox potential, and fast electrochemical kinetics. Coupling it with a benchmark catholyte ROM, the nonaqueous organic flow battery demonstrated significant improvement in cyclable redox material concentrations and cell efficiencies compared to the state-of-the-art nonaqueous systems. Especially, this system produced exceeding cyclability with relatively stable efficiencies and capacities at high ROM concentrations (>0.5 M), which is ascribed to the highly delocalized charge densities in the radical anions of 2,1,3-benzothiadiazole, leading to good chemical stability. This material development represents significant progress toward promising next-generation energy st...

Characterization of NiFe oxyhydroxide electrocatalysts by integrated electronic structure calculations and spectroelectrochemistry.

Abstract: NiFe oxyhydroxide materials are highly active electrocatalysts for the oxygen evolution reaction (OER), an important process for carbon-neutral energy storage. Recent spectroscopic and computational studies increasingly support iron as the site of catalytic activity but differ with respect to the relevant iron redox state. A combination of hybrid periodic density functional theory calculations and spectroelectrochemical experiments elucidate the electronic structure and redox thermodynamics of Ni-only and mixed NiFe oxyhydroxide thin-film electrocatalysts. The UV/visible light absorbance of the Ni-only catalyst depends on the applied potential as metal ions in the film are oxidized before the onset of OER activity. In contrast, absorbance changes are negligible in a 25% Fe-doped catalyst up to the onset of OER activity. First-principles calculations of proton-coupled redox potentials and magnetizations reveal that the Ni-only system features oxidation of Ni2+ to Ni3+, followed by oxidation to a mixed Ni3+/4+ state at a potential coincident with the onset of OER activity. Calculations on the 25% Fe-doped system show the catalyst is redox inert before the onset of catalysis, which coincides with the formation of Fe4+ and mixed Ni oxidation states. The calculations indicate that introduction of Fe dopants changes the character of the conduction band minimum from Ni-oxide in the Ni-only to predominantly Fe-oxide in the NiFe electrocatalyst. These findings provide a unified experimental and theoretical description of the electrochemical and optical properties of Ni and NiFe oxyhydroxide electrocatalysts and serve as an important benchmark for computational characterization of mixed-metal oxidation states in heterogeneous catalysts.