Showing papers by "University of Wollongong published in 2015"

How ‘Big Data’ Can Make Big Impact: Findings from a Systematic Review and a Longitudinal Case Study

Abstract: Big data has the potential to revolutionize the art of management. Despite the high operational and strategic impacts, there is a paucity of empirical research to assess the business value of big data. Drawing on a systematic review and case study findings, this paper presents an interpretive framework that analyzes the definitional perspectives and the applications of big data. The paper also provides a general taxonomy that helps broaden the understanding of big data and its role in capturing business value. The synthesis of the diverse concepts within the literature on big data provides deeper insights into achieving value through big data strategy and implementation.

Asymmetric Supercapacitors Using 3D Nanoporous Carbon and Cobalt Oxide Electrodes Synthesized from a Single Metal-Organic Framework.

Abstract: Nanoporous carbon and nanoporous cobalt oxide (Co3O4) materials have been selectively prepared from a single metal–organic framework (MOF) (zeolitic imidazolate framework, ZIF-67) by optimizing the annealing conditions. The resulting ZIF-derived carbon possesses highly graphitic walls and a high specific surface area of 350 m2·g–1, while the resulting ZIF-derived nanoporous Co3O4 possesses a high specific surface area of 148 m2·g–1 with much less carbon content (1.7 at%). When nanoporous carbon and nanoporous Co3O4 were tested as electrode materials for supercapacitor application, they showed high capacitance values (272 and 504 F·g–1, respectively, at a scan rate of 5 mV·s–1). To further demonstrate the advantages of our ZIF-derived nanoporous materials, symmetric (SSCs) and asymmetric supercapacitors (ASCs) were also fabricated using nanoporous carbon and nanoporous Co3O4 electrodes. Improved capacitance performance was successfully realized for the ASC (Co3O4//carbon), better than those of the SSCs bas...

High‐Performance Sodium Ion Batteries Based on a 3D Anode from Nitrogen‐Doped Graphene Foams

Abstract: A 3D N-doped graphene foam with a 6.8 at% nitrogen content is prepared by annealing a freeze-dried graphene oxide foam in ammonia. It is used as an anode in sodium ion batteries to deliver a high initial reversible capacity of 852.6 mA h g(-1) at 1 C between 0.02 and 3 V with a long-term retention of 69.7% after 150 cycles.

Ramucirumab versus placebo in combination with second-line FOLFIRI in patients with metastatic colorectal carcinoma that progressed during or after first-line therapy with bevacizumab, oxaliplatin, and a fluoropyrimidine (RAISE): A randomised, double-blind, multicentre, phase 3 study

Abstract: Summary Background Angiogenesis is an important therapeutic target in colorectal carcinoma. Ramucirumab is a human IgG-1 monoclonal antibody that targets the extracellular domain of VEGF receptor 2. We assessed the efficacy and safety of ramucirumab versus placebo in combination with second-line FOLFIRI (leucovorin, fluorouracil, and irinotecan) for metastatic colorectal cancer in patients with disease progression during or after first-line therapy with bevacizumab, oxaliplatin, and a fluoropyrimidine. Methods Between Dec 14, 2010, and Aug 23, 2013, we enrolled patients into the multicentre, randomised, double-blind, phase 3 RAISE trial. Eligible patients had disease progression during or within 6 months of the last dose of first-line therapy. Patients were randomised (1:1) via a centralised, interactive voice-response system to receive 8 mg/kg intravenous ramucirumab plus FOLFIRI or matching placebo plus FOLFIRI every 2 weeks until disease progression, unacceptable toxic effects, or death. Randomisation was stratified by region, KRAS mutation status, and time to disease progression after starting first-line treatment. The primary endpoint was overall survival in the intention-to-treat population. This study is registered with ClinicalTrials.gov, number NCT01183780.ld Findings We enrolled 1072 patients (536 in each group). Median overall survival was 13·3 months (95% CI 12·4–14·5) for patients in the ramucirumab group versus 11·7 months (10·8–12·7) for the placebo group (hazard ratio 0·844 95% CI 0·730–0·976; log-rank p=0·0219). Survival benefit was consistent across subgroups of patients who received ramucirumab plus FOLFIRI. Grade 3 or worse adverse events seen in more than 5% of patients were neutropenia (203 [38%] of 529 patients in the ramucirumab group vs 123 [23%] of 528 in the placebo group, with febrile neutropenia incidence of 18 [3%] vs 13 [2%]), hypertension (59 [11%] vs 15 [3%]), diarrhoea (57 [11%] vs 51 [10%]), and fatigue (61 [12%] vs 41 [8%]). Interpretation Ramucirumab plus FOLFIRI significantly improved overall survival compared with placebo plus FOLFIRI as second-line treatment for patients with metastatic colorectal carcinoma. No unexpected adverse events were identified and toxic effects were manageable. Funding Eli Lilly.

Review of solid–liquid phase change materials and their encapsulation technologies

Abstract: Various types of solid–liquid phase change materials (PCMs) have been reviewed for thermal energy storage applications. The review has shown that organic solid–liquid PCMs have much more advantages and capabilities than inorganic PCMs but do possess low thermal conductivity and density as well as being flammable. Inorganic PCMs possess higher heat storage capacities and conductivities, cheaper and readily available as well as being non-flammable, but do experience supercooling and phase segregation problems during phase change process. The review has also shown that eutectic PCMs have unique advantage since their melting points can be adjusted. In addition, they have relatively high thermal conductivity and density but they possess low latent and specific heat capacities. Encapsulation technologies and shell materials have also been examined and limitations established. The morphology of particles was identified as a key influencing factor on the thermal and chemical stability and the mechanical strength of encapsulated PCMs. In general, in-situ polymerization method appears to offer the best technological approach in terms of encapsulation efficiency and structural integrity of core material. There is however the need for the development of enhancement methods and standardization of testing procedures for microencapsulated PCMs.

Nanopatterned textile-based wearable triboelectric nanogenerator.

Abstract: Here we report a fully flexible, foldable nanopatterned wearable triboelectric nanogenerator (WTNG) with high power-generating performance and mechanical robustness. Both a silver (Ag)-coated textile and polydimethylsiloxane (PDMS) nanopatterns based on ZnO nanorod arrays on a Ag-coated textile template were used as active triboelectric materials. A high output voltage and current of about 120 V and 65 μA, respectively, were observed from a nanopatterned PDMS-based WTNG, while an output voltage and current of 30 V and 20 μA were obtained by the non-nanopatterned flat PDMS-based WTNG under the same compressive force of 10 kgf. Furthermore, very high voltage and current outputs with an average value of 170 V and 120 μA, respectively, were obtained from a four-layer-stacked WTNG under the same compressive force. Notably it was found there are no significant differences in the output voltages measured from the multilayer-stacked WTNG over 12 000 cycles, confirming the excellent mechanical durability of WTNGs....

The vulnerability of Indo-Pacific mangrove forests to sea-level rise

Abstract: Sea-level rise can threaten the long-term sustainability of coastal communities and valuable ecosystems such as coral reefs, salt marshes and mangroves. Mangrove forests have the capacity to keep pace with sea-level rise and to avoid inundation through vertical accretion of sediments, which allows them to maintain wetland soil elevations suitable for plant growth. The Indo-Pacific region holds most of the world's mangrove forests, but sediment delivery in this region is declining, owing to anthropogenic activities such as damming of rivers. This decline is of particular concern because the Indo-Pacific region is expected to have variable, but high, rates of future sea-level rise. Here we analyse recent trends in mangrove surface elevation changes across the Indo-Pacific region using data from a network of surface elevation table instruments. We find that sediment availability can enable mangrove forests to maintain rates of soil-surface elevation gain that match or exceed that of sea-level rise, but for 69 per cent of our study sites the current rate of sea-level rise exceeded the soil surface elevation gain. We also present a model based on our field data, which suggests that mangrove forests at sites with low tidal range and low sediment supply could be submerged as early as 2070.

A technology review of electrodes and reaction mechanisms in vanadium redox flow batteries

Abstract: The vanadium redox flow battery, which was first suggested by Skyllas-Kazacos and co-workers in 1985, is an electrochemical storage system which allows energy to be stored in two solutions containing different redox couples. Unlike commercially available batteries, all vanadium redox flow batteries have unique configurations, determined by the size of the electrolyte tanks. This technology has been proven to be an economically attractive and low-maintenance solution, with significant benefits over the other types of batteries. Moreover, the soaring demand for large-scale energy storage has, in turn, increased demands for unlimited capacity, design flexibility, and good safety systems. This work reviews and discusses the progress on electrodes and their reaction mechanisms as key components of the vanadium redox flow battery over the past 30 years. In terms of future outlook, we also provide practical guidelines for the further development of self-sustaining electrodes for vanadium redox flow batteries as an attractive energy storage system.

3D hierarchical porous α-Fe2O3 nanosheets for high-performance lithium-ion batteries

Abstract: To develop a long cycle life and good rate capability electrode, 3D hierarchical porous α-Fe2O3 nanosheets are fabricated on copper foil and directly used as binder-free anode for lithium-ion batteries. This electrode exhibits a high reversible capacity and excellent rate capability. A reversible capacity up to 877.7 mAh g−1 is maintained at 2 C (2.01 A g−1) after 1000 cycles, and even when the current is increased to 20 C (20.1 A g−1), a capacity of 433 mA h g−1 is retained. The unique porous 3D hierarchical nanostructure improves electronic–ionic transport, mitigates the internal mechanical stress induced by the volume variations of the electrode upon cycling, and forms a 3D conductive network during cycling. No addition of any electrochemically inactive conductive agents or polymer binders is required. Therefore, binder-free electrodes further avoid the uneven distribution of conductive carbon on the current collector due to physical mixing and the addition of an insulator (binder), which has benefits leading to outstanding electrochemical performance.

4D Printing with Mechanically Robust, Thermally Actuating Hydrogels.

Abstract: A smart valve is created by 4D printing of hydrogels that are both mechanically robust and thermally actuating. The printed hydrogels are made up of an interpenetrating network of alginate and poly(N-isopropylacrylamide). 4D structures are created by printing the "dynamic" hydrogel ink alongside other static materials.

Mixed methods research

Abstract: Mixed methods research involves the use of qualitative and quantitative data in a single research project. It represents an alternative methodological approach, combining qualitative and quantitative research approaches, which enables nurse researchers to explore complex phenomena in detail. This article provides a practical overview of mixed methods research and its application in nursing, to guide the novice researcher considering a mixed methods research project.

A review and meta‐analysis of the effects of multiple abiotic stressors on marine embryos and larvae

Abstract: Marine organisms are simultaneously exposed to anthropogenic stressors with likely interactive effects, including synergisms in which the combined effects of multiple stressors are greater than the sum of individual effects. Early life stages of marine organisms are potentially vulnerable to the stressors associated with global change, but identifying general patterns across studies, species and response variables is challenging. This review represents the first meta-analysis of multistressor studies to target early marine life stages (embryo to larvae), particularly between temperature, salinity and pH as these are the best studied. Knowledge gaps in research on multiple abiotic stressors and early life stages are also identified. The meta-analysis yielded several key results: (1) Synergistic interactions (65% of individual tests) are more common than additive (17%) or antagonistic (17%) interactions. (2) Larvae are generally more vulnerable than embryos to thermal and pH stress. (3) Survival is more likely than sublethal responses to be affected by thermal, salinity and pH stress. (4) Interaction types vary among stressors, ontogenetic stages and biological responses, but they are more consistent among phyla. (5) Ocean acidification is a greater stressor for calcifying than noncalcifying larvae. Despite being more ecologically realistic than single-factor studies, multifactorial studies may still oversimplify complex systems, and so meta-analyses of the data from them must be cautiously interpreted with regard to extrapolation to field conditions. Nonetheless, our results identify taxa with early life stages that may be particularly vulnerable (e.g. molluscs, echinoderms) or robust (e.g. arthropods, cnidarians) to abiotic stress. We provide a list of recommendations for future multiple stressor studies, particularly those focussed on early marine life stages.

Uniform yolk-shell iron sulfide–carbon nanospheres for superior sodium–iron sulfide batteries

Abstract: Sodium-metal sulfide battery holds great promise for sustainable and cost-effective applications. Nevertheless, achieving high capacity and cycling stability remains a great challenge. Here, uniform yolk-shell iron sulfide-carbon nanospheres have been synthesized as cathode materials for the emerging sodium sulfide battery to achieve remarkable capacity of ∼ 545 mA h g(-1) over 100 cycles at 0.2 C (100 mA g(-1)), delivering ultrahigh energy density of ∼ 438 Wh kg(-1). The proven conversion reaction between sodium and iron sulfide results in high capacity but severe volume changes. Nanostructural design, including of nanosized iron sulfide yolks (∼ 170 nm) with porous carbon shells (∼ 30 nm) and extra void space (∼ 20 nm) in between, has been used to achieve excellent cycling performance without sacrificing capacity. This sustainable sodium-iron sulfide battery is a promising candidate for stationary energy storage. Furthermore, this spatially confined sulfuration strategy offers a general method for other yolk-shell metal sulfide-carbon composites.

Ultrathin MoS2 Nanosheets as Anode Materials for Sodium-Ion Batteries with Superior Performance

Abstract: Few-layer MoS2 nanosheets are successfully synthesized using a simple and scalable ultrasonic exfoliation technique. The thicknesses of the MoS2 nanosheets ares about 10 nm as measured by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The unique nanosheet architecture renders the high-rate transportation of sodium ions due to the short diffusion paths provided by ultrathin thickness and the large interlayer space within the MoS2 crystal structure (d(002) = 6.38 A). When applied as anode materials in sodium-ion batteries, MoS2 nanosheets exhibit a high, reversible sodium storage capacity and excellent cyclability. The MoS2 nanosheets also demonstrate good electrochemical performance at high current densities.

Photocatalytic Degradation of Methyl Orange by CeO2 and Fe–doped CeO2 Films under Visible Light Irradiation

Abstract: Undoped CeO2 and 0.50-5.00 mol% Fe-doped CeO2 nanoparticles were prepared by a homogeneous precipitation combined with homogeneous/impreganation method, and applied as photocatalyst films prepared by a doctor blade technique. The superior photocatalytic performances of the Fe-doped CeO2 films, compared with undoped CeO2 films, was ascribed mainly to a decrease in band gap energy and an increase in specific surface area of the material. The presence of Fe(3+) as found from XPS analysis, may act as electron acceptor and/or hole donor, facilitating longer lived charge carrier separation in Fe-doped CeO2 films as confirmed by photoluminescence spectroscopy. The 1.50 mol% Fe-doped CeO2 film was found to be the optimal iron doping concentration for MO degradation in this study.

Interval squeeze: altered fire regimes and demographic responses interact to threaten woody species persistence as climate changes

Abstract: Projected effects of climate change across many ecosystems globally include more frequent disturbance by fire and reduced plant growth due to warmer (and especially drier) conditions. Such changes affect species - particularly fire-intolerant woody plants - by simultaneously reducing recruitment, growth, and survival. Collectively, these mechanisms may narrow the fire interval window compatible with population persistence, driving species to extirpation or extinction. We present a conceptual model of these combined effects, based on synthesis of the known impacts of climate change and altered fire regimes on plant demography, and describe a syndrome we term interval squeeze. This model predicts that interval squeeze will increase woody plant extinction risk and change ecosystem structure, composition, and carbon storage, especially in regions projected to become both warmer and drier. These predicted changes demand new approaches to fire management that will maximize the in situ adaptive capacity of species to respond to climate change and fire regime change.

China's aquaculture and the world's wild fisheries

Abstract: China is the world's largest producer, consumer, processor, and exporter of finfish and shellfish (defined here as “fish”), and its fish imports are steadily rising ( 1 – 3 ) China produces more than one-third of the global fish supply, largely from its ever-expanding aquaculture sector, as most of its domestic fisheries are overexploited ( 3 – 6 ) Aquaculture accounts for ∼72% of its reported domestic fish production, and China alone contributes >60% of global aquaculture volume and roughly half of global aquaculture value ( 1 , 3 )

Lab on a chip for continuous-flow magnetic cell separation

Abstract: Separation of cells is a key application area of lab-on-a-chip (LOC) devices. Among the various methods, magnetic separation of cells utilizing microfluidic devices offers the merits of biocompatibility, efficiency, and simplicity. This review discusses the fundamental physics involved in using magnetic force to separate particles, and identifies the optimisation parameters and corresponding methods for increasing the magnetic force. The paper then elaborates the design considerations of LOC devices for continuous-flow magnetic cell separation. Examples from the recently published literature illustrate these state-of-the-art techniques.

Hydrogen Storage Materials for Mobile and Stationary Applications: Current State of the Art

Abstract: One of the limitations to the widespread use of hydrogen as an energy carrier is its storage in a safe and compact form. Herein, recent developments in effective high-capacity hydrogen storage materials are reviewed, with a special emphasis on light compounds, including those based on organic porous structures, boron, nitrogen, and aluminum. These elements and their related compounds hold the promise of high, reversible, and practical hydrogen storage capacity for mobile applications, including vehicles and portable power equipment, but also for the large scale and distributed storage of energy for stationary applications. Current understanding of the fundamental principles that govern the interaction of hydrogen with these light compounds is summarized, as well as basic strategies to meet practical targets of hydrogen uptake and release. The limitation of these strategies and current understanding is also discussed and new directions proposed.

Monodisperse magnesium hydride nanoparticles uniformly self-assembled on graphene.

Abstract: Monodisperse MgH2 nanoparticles with homogeneous distribution and a high loading percent are developed through hydrogenation-induced self-assembly under the structure-directing role of graphene. Graphene acts not only as a structural support, but also as a space barrier to prevent the growth of MgH2 nanoparticles and as a thermally conductive pathway, leading to outstanding performance.

Anatase TiO2: Better Anode Material Than Amorphous and Rutile Phases of TiO2 for Na-Ion Batteries

Abstract: Amorphous TiO2@C nanospheres were synthesized via a template approach. After being sintered under different conditions, two types of polyphase TiO2 hollow nanospheres were obtained. The electrochemical properties of the amorphous TiO2 nanospheres and the TiO2 hollow nanospheres with different phases were characterized as anodes for the Na-ion batteries. It was found that all the samples demonstrated excellent cyclability, which was sustainable for hundreds of cycles with little capacity fading, although the anatase TiO2 presented a capability that was better than that of the mixed anatase/rutile TiO2 or the amorphous TiO2@C. Through crystallographic analysis, it was revealed that the anatase TiO2 crystal structure supplies two-dimensional diffusion paths for Na-ion intercalation and more accommodation sites. Density functional theory calculations indicated lower energy barriers for the insertion of Na+ into anatase TiO2. Therefore, anatase TiO2 hollow nanospheres show excellent high-rate performance. Thro...

High-Performance Flexible All-Solid-State Supercapacitor from Large Free-Standing Graphene-PEDOT/PSS Films

Abstract: Although great attention has been paid to wearable electronic devices in recent years, flexible lightweight batteries or supercapacitors with high performance are still not readily available due to the limitations of the flexible electrode inventory. In this work, highly flexible, bendable and conductive rGO-PEDOT/PSS films were prepared using a simple bar-coating method. The assembled device using rGO-PEDOT/PSS electrode could be bent and rolled up without any decrease in electrochemical performance. A relatively high areal capacitance of 448 mF cm(-2) was achieved at a scan rate of 10 mV s(-1) using the composite electrode with a high mass loading (8.49 mg cm(-2)), indicating the potential to be used in practical applications. To demonstrate this applicability, a roll-up supercapacitor device was constructed, which illustrated the operation of a green LED light for 20 seconds when fully charged.

An overview of the suitability of hydrogel-forming polymers for extrusion-based 3D-printing

Abstract: This review evaluates hydrogel-forming polymers that are suitable for soft tissue engineering with a focus on materials that can be fabricated using additive manufacturing (3D-printing). An overview of the specific material requirements for hydrogel-based tissue engineering constructs is presented. This is followed by an explanation of the various hydrogel-forming polymer classes that includes a detailed examination of material properties that are critical for extrusion printing. Specifically, mechanisms for hydrogel formation, degradation, and biological response, activity and compatibility are explored. A discussion of extrusion printing strategies for printable hydrogel-forming polymers is then presented in conjunction with a list of considerations to guide future tissue engineering developments.