Showing papers in "Macromolecular Bioscience in 2017"
TL;DR: PCL and its CNT composites are able to show cell proliferation and have the potential to be used in cardiac tissue engineering, and conditions for 3D printing has been optimized.
Abstract: Fabrication of tissue engineering scaffolds with the use of novel 3D printing has gained lot of attention, however systematic investigation of biomaterials for 3D printing have not been widely explored. In this report, well-defined structures of polycaprolactone (PCL) and PCL- carbon nanotube (PCL-CNT) composite scaffolds have been designed and fabricated using a 3D printer. Conditions for 3D printing has been optimized while the effects of varying CNT percentages with PCL matrix on the thermal, mechanical and biological properties of the printed scaffolds are studied. Raman spectroscopy is used to characterise the functionalized CNTs and its interactions with PCL matrix. Mechanical properties of the composites are characterised using nanoindentation. Maximum peak load, elastic modulus and hardness increases with increasing CNT content. Differential scanning calorimetry (DSC) studies reveal the thermal and crystalline behaviour of PCL and its CNT composites. Biodegradation studies are performed in Pseudomonas Lipase enzymatic media, showing its specificity and effect on degradation rate. Cell imaging and viability studies of H9c2 cells from rat origin on the scaffolds are performed using fluorescence imaging and MTT assay, respectively. PCL and its CNT composites are able to show cell proliferation and have the potential to be used in cardiac tissue engineering.
134 citations
TL;DR: The most promising physico-chemical approaches to enhance micelle stability and drug retention are described, and how these strategies have resulted in systems with promising therapeutic efficacy in animal models, paving the way for clinical translation is summarized.
Abstract: Polymeric micelles (PM) have been extensively used for tumor-targeted delivery of hydrophobic anti-cancer drugs. The lipophilic core of PM is naturally suitable for loading hydrophobic drugs and the hydrophilic shell endows them with colloidal stability and stealth properties. Decades of research on PM have resulted in tremendous numbers of PM-forming amphiphilic polymers, and approximately a dozen micellar nanomedicines have entered the clinic. The first generation of PM can be considered solubilizers of hydrophobic drugs, with short circulation times resulting from poor micelle stability and unstable drug entrapment. To more optimally exploit the potential of PM for targeted drug delivery, several physical (e.g., π–π stacking, stereocomplexation, hydrogen bonding, host–guest complexation, and coordination interaction) and chemical (e.g., free radical polymerization, click chemistry, disulfide and hydrazone bonding) strategies have been developed to improve micelle stability and drug retention. In this review, the most promising physico-chemical approaches to enhance micelle stability and drug retention are described, and how these strategies have resulted in systems with promising therapeutic efficacy in animal models, paving the way for clinical translation, is summarized.
120 citations
TL;DR: In this review, the recent progress of AIE polymers for biological applications is summarized.
Abstract: Aggregation-caused quenching (ACQ) is a general phenomenon that is faced by traditional fluorescent polymers. Aggregation-induced emission (AIE) is exactly opposite to ACQ. AIE molecules are almost nonemissive in their molecularly dissolved state, but they can be induced to show high fluorescence in the aggregated or solid state. Incorporation of AIE phenomenon into polymer design has yielded various polymers with AIE characteristics. In this review, the recent progress of AIE polymers for biological applications is summarized.
92 citations
TL;DR: A robust method is showed to quantify GBM invasion over long culture times to reveal the coordinated effect of matrix stiffness, immobilized HA, and compensatory HA production on G BM invasion.
Abstract: Glioblastoma (GBM) is the most common and lethal form of brain cancer. Its high mortality is associated with its aggressive invasion throughout the brain. The heterogeneity of stiffness and hyaluronic acid (HA) content within the brain makes it difficult to study invasion in vivo. A dextran-bead assay is employed to quantify GBM invasion within HA-functionalized gelatin hydrogels. Using a library of stiffness-matched hydrogels with variable levels of matrix-bound HA, it is reported that U251 GBM invasion is enhanced in softer hydrogels but reduced in the presence of matrix-bound HA. Inhibiting HA-CD44 interactions reduces invasion, even in hydrogels lacking matrix-bound HA. Analysis of HA biosynthesis suggests that GBM cells compensate for a lack of matrix-bound HA by producing soluble HA to stimulate invasion. Together, a robust method is showed to quantify GBM invasion over long culture times to reveal the coordinated effect of matrix stiffness, immobilized HA, and compensatory HA production on GBM invasion.
82 citations
TL;DR: The authors conclude the PPy used offer good histocompatibility with central nervous system cells and that PPy sheets can be used as intracranial, AED delivery implant.
Abstract: This blinded controlled prospective randomized study investigates the biocompatibility of polypyrrole (PPy) polymer that will be used for intracranial triggered release of anti-epileptic drugs (AEDs). Three by three millimeters PPy are implanted subdurally in six adult female genetic absence epilepsy rats from Strasbourg. Each rat has a polymer implanted on one side of the cortex and a sham craniotomy performed on the other side. After a period of seven weeks, rats are euthanized and parallel series of coronal sections are cut throughout the implant site. Four series of 15 sections are histological (hematoxylin and eosin) and immunohistochemically (neuron-specific nuclear protein, glial fibrillary acidic protein, and anti-CD68 antibody) stained and evaluated by three investigators. The results show that implanted PPy mats do not induce obvious inflammation, trauma, gliosis, and neuronal toxicity. Therefore the authors conclude the PPy used offer good histocompatibility with central nervous system cells and that PPy sheets can be used as intracranial, AED delivery implant.
78 citations
TL;DR: The present review is aimed at elucidating relatively new aspects of muco adhesion/mucus interaction and related phenomena that emerged from a Mucoadhesion workshop held in Munster on 2-3 September 2015 as a satellite event of the ICCC 13th-EUCHIS 12th.
Abstract: The present review is aimed at elucidating relatively new aspects of mucoadhesion/mucus interaction and related phenomena that emerged from a Mucoadhesion workshop held in Munster on 2-3 September 2015 as a satellite event of the ICCC 13th-EUCHIS 12th. After a brief outline of the new issues, the focus is on mucus description, purification, and mucus/mucin characterization, all steps that are pivotal to the understanding of mucus related phenomena and the choice of the correct mucosal model for in vitro and ex vivo experiments, alternative bio/mucomimetic materials are also presented. Then a selection of preparative techniques and testing methods are described (at molecular as well as micro and macroscale) that may support the pharmaceutical development of mucus interactive systems and assist formulators in the scale-up and industrialization steps. Recent applications of mucoadhesive systems (including medical devices) intended for different routes of administration (oral, gastrointestinal, vaginal, nasal, ocular, and intravesical) and for the treatment of difficult to treat pathologies or the alleviation of symptoms are described.
74 citations
TL;DR: Although the three fucoidan extracts present different molecular weights, depolymerization of selected samples discarded Mw is believed to be the key factor in the antitumor activity.
Abstract: There is an urgent need for antitumor bioactive agents with minimal or no side effects over normal adjacent cells. Fucoidan is a marine-origin polymer with known antitumor activity. However, there are still some concerns about its application due to the inconsistent experimental results, specifically its toxicity over normal cells and the mechanism behind its action. Herein, three fucoidan extracts (FEs) have been tested over normal and breast cancer cell lines. From cytotoxicity results, only one of the extracts shows selective antitumor behavior (at 0.2 mg mL−1), despite similarities in sulfation degree and carbohydrates composition. Although the three FEs present different molecular weights, depolymerization of selected samples discarded Mw as the key factor in the antitumor activity. Significant differences in sulfates position and branching are observed, presenting FE 2 the higher branching degree. Based on all these experimental data, it is believed that these last two properties are the ones that influence the cytotoxic effects of fucoidan extracts.
70 citations
TL;DR: Recent strategies developed in nanomedicine including poly(ethylene glycol)-based modifications, cationic and thiolated polymers, as well as particles with high charge density, zeta-potential shifting ability, or mucolytic properties are discussed.
Abstract: Although oral is the preferred route of administration of pharmaceutical formulations, the long-standing challenge for medically active compounds to efficiently cross the mucus layer barrier limits its wider applicability. Efforts in nanomedicine to overcome this hurdle consider mucoadhesive and mucopenetrating drug carriers by selectively designing (macromolecular) building blocks. This review highlights and critically discusses recent strategies developed in this context including poly(ethylene glycol)-based modifications, cationic and thiolated polymers, as well as particles with high charge density, zeta-potential shifting ability, or mucolytic properties. The latest advances in ex vivo test platforms are also reviewed.
57 citations
TL;DR: It is demonstrated that thiol-ene chemistry offers a favorable strategy for incorporating bioactives into gelatin hydrogels as compared to methacrylation while furthermore highlighting GelMA-HepSH hydrogel as candidates for cartilage TE applications.
Abstract: Multicomponent gelatin-methacryloyl (GelMA) hydrogels are regularly adopted for cartilage tissue engineering (TE) applications, where optimizing chemical modifications for preserving biofunctionality is often overlooked. This study investigates the biological effect of two different modification methods, methacrylation and thiolation, to copolymerize GelMA and heparin. The native bioactivity of methacrylated heparin (HepMA) and thiolated heparin (HepSH) is evaluated via thromboplastin time and heparan sulfate-deficient myeloid cell-line proliferation assay, demonstrating that thiolation is superior for preserving anticoagulation and growth factor signaling capacity. Furthermore, incorporating either HepMA or HepSH in chondrocyte-laden GelMA hydrogels, cultured for 5 weeks under chondrogenic conditions, promotes cell viability and chondrocyte phenotype. However, only GelMA-HepSH hydrogels yield significantly greater differentiation and matrix deposition in vitro compared to GelMA. This study demonstrates that thiol-ene chemistry offers a favorable strategy for incorporating bioactives into gelatin hydrogels as compared to methacrylation while furthermore highlighting GelMA-HepSH hydrogels as candidates for cartilage TE applications.
57 citations
TL;DR: This work signifies for the first time that cationic amphiphilic PHB-b-PDMAEMA copolymers can be utilized for the drug and gene codelivery to drug resistant cancer cells with high expression of antiapoptosis Bcl-2 protein and the positive results are encouraging for the further design ofcodelivery platforms for combating drug resistantcancer cells.
Abstract: Antiapoptotic Bcl-2 protein's upregulated expression is a key reason for drug resistance leading to failure of chemotherapy. In this report, a series of biocompatible amphiphilic cationic poly[(R)-3-hydroxybutyrate] (PHB)-b-poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) copolymer, comprising hydrophobic PHB block and cationic PDMAEMA block, is designed to codeliver hydrophobic chemotherapeutic paclitaxel and Bcl-2 converting gene Nur77/ΔDBD with enhanced stability, due to the micelle formation by hydrophobic PHB segment. This copolymer shows less toxicity but similar gene transfection efficiency to polyethyenimine (25k). More importantly, this codelivery approach by PHB-PDMAEMA leads to increased drug resistant HepG2/Bcl-2 cancer cell death, by increased expression of Nur77 proteins in the Bcl-2 present intracellular mitochondria. This work signifies for the first time that cationic amphiphilic PHB-b-PDMAEMA copolymers can be utilized for the drug and gene codelivery to drug resistant cancer cells with high expression of antiapoptosis Bcl-2 protein and the positive results are encouraging for the further design of codelivery platforms for combating drug resistant cancer cells.
55 citations
TL;DR: This study supports that sericin is biosafe as a natural biomaterial by extensively reviewing relevant literatures and experimentally demonstrating thatSericin exhibits mild inflammatory responses, negligible allergenicity, and low immunogenicity in vivo.
Abstract: The biosafety of sericin remains controversial. The misunderstanding regarding sericin causing adverse biological responses have been clarified by extensively reviewing relevant literatures and experimentally demonstrating that sericin exhibits mild inflammatory responses, negligible allergenicity, and low immunogenicity in vivo. This study supports that sericin is biosafe as a natural biomaterial.
TL;DR: It is believed the colistin-loaded hydrogel to be a potential localized wound-healing formulation to treat burn wounds against microbial infection and the biodegradability of the product is believed.
Abstract: There is an urgent unmet medical need for new treatments for wound and burn infections caused by multidrug-resistant Gram-negative "superbugs," especially the problematic Pseudomonas aeruginosa. In this work, the incorporation of colistin, a potent lipopeptide into a self-healable hydrogel (via dynamic imine bond formation) following the chemical reaction between the amine groups present in glycol chitosan and an aldehyde-modified poly(ethylene glycol), is reported. The storage module (G') of the colistin-loaded hydrogel ranges from 1.3 to 5.3 kPa by varying the amount of the cross-linker and colistin loading providing different options for topical wound healing. The majority of the colistin is released from the hydrogel within 24 h and remains active as demonstrated by both antibacterial in vitro disk diffusion and time-kill assays. Moreover and pleasingly, the colistin-loaded hydrogel performs almost equally well as native colistin against both the colistin-sensitive and also colistin-resistant P. aeruginosa strain in the in vivo animal "burn" infection model despite exhibiting a slower killing profile in vitro. Based on this antibiotic performance along with the biodegradability of the product, it is believed the colistin-loaded hydrogel to be a potential localized wound-healing formulation to treat burn wounds against microbial infection.
TL;DR: The authors aim to discuss the role of these parameters in the successful design of different drug delivery architectures and to delineate some basic correlations between structure, properties, and the biological behavior of polypeptide-based conjugates.
Abstract: Synthetic polypeptides or polyamino acids have become a useful and multifunctional platform in advanced drug delivery studies. Nonetheless, the full potential of these systems has yet to be achieved. The final structure of polypeptide conjugates and their in vivo behavior are dependent on an extraordinarily complex pattern of interconnected physico-chemical and structural parameters, making sophisticated directional design of such systems difficult and often unachievable. In this review, the authors aim to discuss the role of these parameters in the successful design of different drug delivery architectures and to delineate some basic correlations between structure, properties, and the biological behavior of polypeptide-based conjugates.
TL;DR: Electroactive SF/PASA scaffolds with a suitable microenvironment, which can enhance the myogenic differentiation of C2C12 cells, have a great potential for skeletal muscle regeneration.
Abstract: Silk fibroin (SF) with good biocompatibility and degradability has great potential for tissue engineering. However, the SF based scaffolds lack the electroactivity to regulate the myogenic differentiation for the regeneration of muscle tissue, which is sensitive to electrical signal. Herein, a series of electroactive biodegradable scaffolds based on SF and water-soluble conductive poly(aniline-co-N-(4-sulfophenyl) aniline) (PASA) via a green method for skeletal muscle tissue engineering are designed. SF/PASA scaffolds are prepared by vortex of aqueous solution of SF and PASA under physiological condition. Murine-derived L929 fibroblast and C2C12 myoblast cells are used to evaluate cytotoxicity of SF/PASA scaffolds. Moreover, myogenic differentiation of C2C12 cells is investigated by analyzing the morphology of myotubes and related gene expression. These results suggest that electroactive SF/PASA scaffolds with a suitable microenvironment, which can enhance the myogenic differentiation of C2C12 cells, have a great potential for skeletal muscle regeneration.
TL;DR: A novel bioprinting method that utilizes core-shell cell-laden strands with a mechanically robust shell and an extracellular matrix-like core has been developed and represents a new strategy for fabricating functional human tissues and organs.
Abstract: The strand material in extrusion-based bioprinting determines the microenvironments of the embedded cells and the initial mechanical properties of the constructs. One unmet challenge is the combination of optimal biological and mechanical properties in bioprinted constructs. Here, a novel bioprinting method that utilizes core-shell cell-laden strands with a mechanically robust shell and an extracellular matrix-like core has been developed. Cells encapsulated in the strands demonstrate high cell viability and tissue-like functions during cultivation. This process of bioprinting using core-shell strands with optimal biochemical and biomechanical properties represents a new strategy for fabricating functional human tissues and organs.
TL;DR: The study demonstrates carbon dot/peptide functionalized hyperbranched polyurethane gel for bone tissue engineering application and reveals the occurrence of calcification and blood vessel formation.
Abstract: The present study delves into a combined bio-nano-macromolecular approach for bone tissue engineering. This approach relies on the properties of an ideal scaffold material imbued with all the chemical premises required for fostering cellular growth and differentiation. A tannic acid based water dispersible hyperbranched polyurethane is fabricated with bio-nanohybrids of carbon dot and four different peptides (viz. SVVYGLR, PRGDSGYRGDS, IPP, and CGGKVGKACCVPTKLSPISVLYK) to impart target specific in vivo bone healing ability. This polymeric bio-nanocomposite is blended with 10 wt% of gelatin and examined as a non-invasive delivery vehicle. In vitro assessment of the developed polymeric system reveals good osteoblast adhesion, proliferation, and differentiation. Aided by this panel of peptides, the polymeric bio-nanocomposite exhibits in vivo ectopic bone formation ability. The study on in vivo mineralization and vascularization reveals the occurrence of calcification and blood vessel formation. Thus, the study demonstrates carbon dot/peptide functionalized hyperbranched polyurethane gel for bone tissue engineering application.
TL;DR: The evaluation of thrombin and factor XIIa formation, platelet reduction, and the release of activated complement system proteins, shows that the NFC hydrogel efficiently triggered blood coagulation, with a rapid onset of clot formation, while displaying basal complement system activation.
Abstract: The present work investigates Ca2+ -crosslinked nanofibrillated cellulose hydrogels as potential hemostatic wound dressings by studying core interactions between the materials and a central component of wounds and wound healing-the blood. Hydrogels of wood-derived anionic nanofibrillated cellulose (NFC) and NFC hydrogels that incorporate kaolin or collagen are studied in an in vitro whole blood model and with platelet-free plasma assays. The evaluation of thrombin and factor XIIa formation, platelet reduction, and the release of activated complement system proteins, shows that the NFC hydrogel efficiently triggered blood coagulation, with a rapid onset of clot formation, while displaying basal complement system activation. By using the NFC hydrogel as a carrier of kaolin, the onset of hemostasis is further boosted, while the NFC hydrogel containing collagen exhibits blood activating properties comparable to the anionic NFC hydrogel. The herein studied NFC hydrogels demonstrate great potential for being part of advanced wound healing dressings that can be tuned to target certain wounds (e.g., strongly hemorrhaging ones) or specific phases of the wound healing process for optimal wound management.
TL;DR: This Review provides an overview of recent advances in the design of biohybrid drug delivery systems, which combine cells with synthetic systems to overcome some of these biological hurdles.
Abstract: The goal of drug delivery is to deliver therapeutics to the site of disease while reducing unwanted side effects. In recent years, a diverse variety of synthetic nano and microparticles have been developed as drug delivery systems. The success of these systems for drug delivery lies in their ability to overcome biological barriers such as the blood-brain barrier, to evade immune clearance and avoid nonspecific biodistribution. This Review provides an overview of recent advances in the design of biohybrid drug delivery systems, which combine cells with synthetic systems to overcome some of these biological hurdles. Examples include eukaryotic cells, such as stem cells, red blood cells, immune cells, platelets, and cancer cells that are used to carry drug-loaded synthetic particles. Synthetic particles can also be cloaked with naturally derived cell membranes and thereby evade immune clearance, exhibit prolonged systemic circulation, and target specific tissues by capitalizing on the interaction/homing tendency of certain cells and their membrane components to particular tissues. Different designs of cell-based biohybrid systems and their applications, as well as their promise and limitations, are discussed herein.
TL;DR: These VEGF-releasing mats enable the transplantation of multilayered cardiomyocyte sheets in a single procedure, and should expand the potential of cell sheet transplantation for therapeutic applications.
Abstract: Cell sheet transplantation is a key tissue engineering technology A vascular endothelial growth factor (VEGF)-releasing fiber mat is developed for the transplantation of multilayered cardiomyocyte sheets Poly(vinyl alcohol) fiber mats bearing poly(lactic-co-glycolic acid) nanoparticles that incorporate VEGF are fabricated using electrospinning and electrospray methods Six-layered cardiomyocyte sheets are transplanted with a VEGF-releasing mat into athymic rats After two weeks, these sheets produce thicker cardiomyocyte layers compared with controls lacking a VEGF-releasing mat, and incorporate larger-diameter blood vessels containing erythrocytes Thus, local VEGF release near the transplanted cardiomyocytes induces vascularization, which supplies sufficient oxygen and nutrients to prevent necrosis In contrast, cardiomyocyte sheets without a VEGF-releasing mat do not survive in vivo, probably undergo necrosis, and are reduced in thickness Hence, these VEGF-releasing mats enable the transplantation of multilayered cardiomyocyte sheets in a single procedure, and should expand the potential of cell sheet transplantation for therapeutic applications
TL;DR: In this review, recent progress in chemoenzymatic polypeptide synthesis for the production of functional and structural materials for various applications is summarized in conjunction with the current status of technical challenges in the field.
Abstract: Polypeptides inspired by the natural functional and structural proteins present in living systems are promising materials for various fields in terms of their versatile functionality and physical properties. Designing and synthesizing mimetic sequences of specific peptide motifs in proteins are important for exploring the functionality of natural proteins. Chemoenzymatic polymerization, which utilizes aminolysis (i.e., the reverse reaction of hydrolysis catalyzed by proteases), is a useful technique for synthesizing artificial polypeptide materials and has several advantages, including facile synthesis protocols, environmental friendliness, scalability, and atom economy. In this review, recent progress in chemoenzymatic polypeptide synthesis for the production of functional and structural materials for various applications is summarized in conjunction with the current status of technical challenges in the field.
TL;DR: In this article, an innovative sealants based on hydrophobically modified Alaska pollock-derived gelatin (hm-ApGltn) and a poly(ethylene)glycol-based 4-armed crosslinker (4S-PEG) have been developed and their burst strengths have been evaluated using fresh rat lung.
Abstract: Pulmonary air leaks are medical complications of thoracic surgery for which fibrin sealant is the main treatment. In this study, innovative sealants based on hydrophobically modified Alaska pollock-derived gelatin (hm-ApGltn) and a poly(ethylene)glycol-based 4-armed cross-linker (4S-PEG) have been developed and their burst strengths have been evaluated using fresh rat lung. The developed sealants show higher lung burst strength compared with the nonmodified original ApGltn (Org-ApGltn)-based sealant and a commercial fibrin sealant. The maximum burst strength of the hm-ApGltn-based sealant is 1.6-fold higher than the Org-ApGltn-based sealant (n = 5, p < 0.05), and 2.1-fold higher than the commercial fibrin sealant (n = 5, p < 0.05). Cell culture experiments show that modification of ApGltn with cholesteryl or stearoyl groups effectively enhances anchoring to the cell surface. In addition, binding constants between hm-ApGltn and extracellular matrix proteins such as fibronectin and fibrillin are increased. Therefore, the new hm-ApGltn/4S-PEG-based sealant has the potential for applications in thoracic surgery.
TL;DR: Doxorubicin-incorporated multivalent aptamer-siRNA conjugates exert promising anticancer effects, such as activation of caspase-3/7 and decrease of cell viability, on multidrug-resistant cancer cells because of their high intracellular uptake efficiency.
Abstract: Multivalent aptamer–siRNA conjugates containing multiple mucin-1 aptamers and BCL2-specific siRNA are synthesized, and doxorubicin, an anthracycline anticancer drug, is loaded into these conjugates through intercalation with nucleic acids. These doxorubicin-incorporated multivalent aptamer–siRNA conjugates are transfected to mucin-1 overexpressing MCF-7 breast cancer cells and their multidrug-resistant cell lines. Doxorubicin-incorporated multivalent aptamer–siRNA conjugates exert promising anticancer effects, such as activation of caspase-3/7 and decrease of cell viability, on multidrug-resistant cancer cells because of their high intracellular uptake efficiency. Thus, this delivery system is an efficient tool for combination oncotherapy with chemotherapeutics and nucleic acid drugs to overcome multidrug resistance.
TL;DR: The development and characterization of acidic hydrogel dressings based on interpenetrating poly(ethylene glycol) diacrylate/acrylic acid/alginate networks results in high liquid uptake up to 500% and the combination of two separate polymer networks significantly improves the tensile and compressive stability.
Abstract: The development of chronic wounds has been frequently associated with alkaline pH values. The application of pH-modulating wound dressings can, therefore, be a promising treatment option to promote normal wound healing. This study reports on the development and characterization of acidic hydrogel dressings based on interpenetrating poly(ethylene glycol) diacrylate/acrylic acid/alginate networks. The incorporation of ionizable carboxylic acid groups results in high liquid uptake up to 500%. The combination of two separate polymer networks significantly improves the tensile and compressive stability. In a 2D cell migration assay, the application of hydrogels (0% to 1.5% acrylic acid) results in complete "wound" closure; hydrogels with 0.25% acrylic acid significantly increase the cell migration velocity to 19.8 ± 1.9 µm h-1 . The most promising formulation (hydrogels with 0.25% acrylic acid) is tested on 3D human skin constructs, increasing keratinocyte ingrowth into the wound by 164%.
TL;DR: A novel strategy is reported to create high-strength N-halamine incorporated poly(vinyl alcohol-co-ethylene) films (HAF films) with renewable antimicrobial activity by combining melt radical graft polymerization and reactive extrusion technique.
Abstract: Antimicrobial polymeric films that are both mechanically robust and function renewable would have broad technological implications for areas ranging from medical safety and bioengineering to foods industry; however, creating such materials has proven extremely challenging. Here, a novel strategy is reported to create high-strength N-halamine incorporated poly(vinyl alcohol-co-ethylene) films (HAF films) with renewable antimicrobial activity by combining melt radical graft polymerization and reactive extrusion technique. The approach allows here the intrinsically rechargeable N-halamine moieties to be covalently incorporated into polymeric films with high biocidal activity and durability. The resulting HAF films exhibit integrated properties of robust mechanical strength, high transparency, rechargeable chlorination capability (>300 ppm), and long-term durability, which can effectively offer 3–5 logs CFU reduction against typical pathogenic bacterium Escherichia coli within a short contact time of 1 h, even at high organism conditions. The successful synthesis of HAF films also provides a versatile platform for exploring the applications of antimicrobial N-halamine moieties in a self-supporting, structurally adaptive, and function renewable form.
TL;DR: An overview of the different approaches that have been developed to control intracellular delivery of polymer nanomedicines is provided and the different techniques that can be used to monitor these processes are discussed.
Abstract: Polymer nanomedicines are very attractive to improve the delivery of chemotherapeutics. Polymer conjugates and other polymer-based nanocarriers allow to increase plasma half-life and drug bioavailability and can also be guided toward tumors using passive and active targeting strategies. Since many chemotherapeutics act on targets that are located in well-defined subcellular compartments, other important factors that contribute to an efficient therapy include cellular internalization and subsequent intracellular trafficking of the polymer nanomedicines and/or its payload to the appropriate organelle in the cytoplasm. This article provides an overview of the different approaches that have been developed to control intracellular delivery of polymer nanomedicines and discusses the different techniques that can be used to monitor these processes.
TL;DR: The synthesis and biological evaluation of novel extracellular matrix-inspired entry inhibitors based on polyglycerol sulfate-functionalized graphene sheets show strong inhibitory effects, which are equal or better than the common standards enrofloxacin and heparin as demonstrated for ASFV and PrV.
Abstract: African swine fever virus (ASFV) is one of the most dangerous viruses for pigs and is endemic in Africa but recently also spread into the Russian Federation and the Eastern border of the EU. So far there is no vaccine or antiviral drug available to curtail the infection. Thus, control strategies based on novel inhibitors are urgently needed. Another highly relevant virus infection in pigs is Aujeszky's disease caused by the alphaherpesvirus pseudorabies virus (PrV). This article reports the synthesis and biological evaluation of novel extracellular matrix-inspired entry inhibitors based on polyglycerol sulfate-functionalized graphene sheets. The developed 2D architectures bind enveloped viruses during the adhesion process and thereby exhibit strong inhibitory effects, which are equal or better than the common standards enrofloxacin and heparin as demonstrated for ASFV and PrV. Overall, the developed polyvalent 2D entry inhibitors are nontoxic and efficient nanoarchitectures, which interact with various types of enveloped viruses. Therefore they prevent viral adhesion to the host cell and especially target viruses that rely on a heparan sulfate-dependent cell entry mechanism.
TL;DR: Experimental results exhibit that the fluorinated polypeptides have low cytotoxicity and good gene transfection efficiency even in the presence of 50% fetal bovine serum.
Abstract: A novel PEGylation polypeptide, poly(ethylene glycol)-b-poly(l-lysine)-b-poly(l-cysteine) (PEG-PLL-PCys) triblock copolymer is synthesized via the sequential ring-opening polymerization of amino acid N-carboxyanhydrides initiated by methoxypolyethylene glycol amine (mPEG-NH2, Mw is 2 kDa). Subsequently, the obtained polypeptide is partially conjugated with fluorocarbon chains via disulfide exchange reaction. PLL segment can condense plasmid DNA through an electrostatic force to form a complex core, PEG segment surrounding the complex like a corona can prevent the complex from precipitation and reduce the adsorption of serum, while PCys segment with fluorocarbon can enhance the cellular uptake and the stability of the formed polyplex micelles in physiological conditions. Experiment results exhibit that the fluorinated polypeptides have low cytotoxicity and good gene transfection efficiency even in the presence of 50% fetal bovine serum.
TL;DR: Evidence is provided here that butyrate inhibits neutrophil ROS release in a dose and time-dependent fashion, and B-NPs appear as promising tools to limit ROS-dependent tissue injury during inflammation.
Abstract: Tissue damage caused by excessive amounts of neutrophil-derived reactive oxygen species (ROS) occurs in many inflammatory diseases. Butyrate is a short-chain fatty acid (SCFA) with known anti-inflammatory properties, able to modulate several neutrophil functions. Evidence is provided here that butyrate inhibits neutrophil ROS release in a dose and time-dependent fashion. Given the short half-life of butyrate, chitosan/hyaluronan nanoparticles are next designed and developed as controlled release carriers able to provide cells with a long-lasting supply of this SCFA. Notably, while the inhibition of neutrophil ROS production by free butyrate declines over time, that of butyrate-loaded chitosan/hyaluronan nanoparticles (B-NPs) is sustained. Additional valuable features of these nanoparticles are inherent ROS scavenger activity, resistance to cell internalization, and mucoadhesiveness. B-NPs appear as promising tools to limit ROS-dependent tissue injury during inflammation. Particularly, by virtue of their mucoadhesiveness, B-NPs administered by enema can be effective in the treatment of inflammatory bowel diseases.
TL;DR: Polymeric nanoassemblies for optical imaging, magnetic resonance imaging, multifunctional imaging, and image-guided therapy, emphasizing their role in cancer diagnosis and theranostics are highlighted.
Abstract: Several imaging modalities have been widely applied for the detection of cancer and its pathological activity in combination with probes capable of improving the contrast between healthy and cancerous tissues. Biocompatible polymeric nanoassemblies have been developed for precise detection of malignant tumors by enhancing the selectivity and sensitivity of the imaging. Exploiting the compartmentalized structure of the nanoassemblies advantageously allows delivering both imaging and therapeutic agents for cancer multifunctional imaging and theranostics, i.e., the combination of therapy and diagnosis tool on a single platform. Thus, nanoassemblies have high potential not only for cancer molecular imaging but also for tracing nanoparticles in biological systems, studying their biological pathways, gathering pathological information, monitoring therapeutic effects, and guiding pinpoint therapies. In this review, polymeric nanoassemblies for optical imaging, magnetic resonance imaging, multifunctional imaging, and image-guided therapy, emphasizing their role in cancer diagnosis and theranostics are highlighted.
TL;DR: It is shown that microfibers are a highly tunable and versatile tool with great promise for creating 3D cell cultures with specific properties.
Abstract: Microfibers have received much attention due to their promise for creating flexible and highly relevant tissue models for use in biomedical applications such as 3D cell culture, tissue modeling, and clinical treatments. A generated tissue or implanted material should mimic the natural microenvironment in terms of structural and mechanical properties as well as cell adhesion, differentiation, and growth rate. Therefore, the mechanical and biological properties of the fibers are of importance. This paper briefly introduces common fiber fabrication approaches, provides examples of polymers used in biomedical applications, and then reviews the methods applied to modify the mechanical and biological properties of fibers fabricated using different approaches for creating a highly controlled microenvironment for cell culturing. It is shown that microfibers are a highly tunable and versatile tool with great promise for creating 3D cell cultures with specific properties.