scispace - formally typeset
Open Access

Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures

TLDR
The Emerging Technology Series as mentioned in this paper is a series of information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members, with a focus on the development and appropriate use of new and emerging technologies.
Abstract
*Co-chairs of the subcommittee that prepared this document. Note: The committee acknowledges the contribution of associate member Paul Kelley. ACI encourages the development and appropriate use of new and emerging technologies through the publication of the Emerging Technology Series. This series presents information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members. The presented information and recommendations, and their basis, may be less fully developed and tested than those for more mature technologies. This report identifies areas in which information is believed to be less fully developed, and describes research needs. The professional using this document should understand the limitations of this document and exercise judgment as to the appropriate application of this emerging technology.

read more

Content maybe subject to copyright    Report

Citations
More filters
Journal ArticleDOI

Strain distribution of basalt FRP-wrapped concrete cylinders

TL;DR: In this article, the authors present the results of an experimental study on the distribution of strain on a unidirectional basalt fiber-reinforced polymer (BFRP) wrapped around concrete cylinders.
Journal ArticleDOI

Confined Concrete Elements with Cement-Based Composites: Confinement Effectiveness and Prediction Models

TL;DR: In this paper, the results of compression tests conducted on fabric-reinforced cementitious matrix (FRCM)-confined concrete elements are analyzed using a database of 152 compression tests on FRCM-wrapped cylindrical specimens assembled from the literature.
Journal ArticleDOI

Sources of uncertainty and design values for field-manufactured FRP

TL;DR: In this paper, a rational definition of material design values for field-manufactured externally bonded polymer composites is proposed based on the use of the anticipated mean in-situ value as the design value with a separate composite specific resistance factor that considers the potential for different levels of material uncertainty depending on circumstances specific to individual applications.
Journal ArticleDOI

Effectiveness of prestressed NSM CFRP laminates for the flexural strengthening of RC slabs

TL;DR: In this article, the effect of the prestressed Near Surface Mounted (NSM) Carbon Fiber Reinforced Polymer (CFRP) laminates on the behavior of reinforced concrete (RC) slabs is investigated.
References
More filters
Journal ArticleDOI

Theoretical stress strain model for confined concrete

TL;DR: In this paper, a stress-strain model for concrete subjected to uniaxial compressive loading and confined by transverse reinforcement is developed for concrete sections with either spiral or circular hoops, or rectangular hoops with or without supplementary cross ties.
MonographDOI

Seismic Design of Reinforced Concrete and Masonry Buildings

TL;DR: In this paper, the causes and effects of earthquakes: Seismicity, Structural Response, Seismic Action, and Seismical Action in Member Design principles of member design.
Book

Seismic Design and Retrofit of Bridges

TL;DR: In this article, the authors focus on designing adequate displacement and ductility capacity into new bridges, with less significance placed on strength, where a strength hierarchy is established in a bridge to ensure that damage is controllable and occurs only where the designer intends.
Journal ArticleDOI

Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review

TL;DR: A concise state-of-the-art survey of fiber-reinforced polymer composites for construction applications in civil engineering is presented in this article, which includes a historical review, the current state of the art, and future challenges.

Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review

TL;DR: A concise state-of-the-art survey of fiber-reinforced polymer composites for construction applications in civil engineering is presented in this article, which includes a historical review, the current state of the art, and future challenges.
Related Papers (5)