scispace - formally typeset
Open Access

Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures

TLDR
The Emerging Technology Series as mentioned in this paper is a series of information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members, with a focus on the development and appropriate use of new and emerging technologies.
Abstract
*Co-chairs of the subcommittee that prepared this document. Note: The committee acknowledges the contribution of associate member Paul Kelley. ACI encourages the development and appropriate use of new and emerging technologies through the publication of the Emerging Technology Series. This series presents information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members. The presented information and recommendations, and their basis, may be less fully developed and tested than those for more mature technologies. This report identifies areas in which information is believed to be less fully developed, and describes research needs. The professional using this document should understand the limitations of this document and exercise judgment as to the appropriate application of this emerging technology.

read more

Content maybe subject to copyright    Report

Citations
More filters
Journal ArticleDOI

Case Study: Seismic Retrofitting of a Medieval Bell Tower with FRP

TL;DR: In this paper, a fiber-reinforced plastics (FRP) tie system is applied to the inner walls and anchored at the base by a reinforced concrete slab, independent of the tower's foundation.
Journal ArticleDOI

Effect of acid attack on FRP-to-concrete bonded interfaces

TL;DR: In this article, the impact of acidic conditions on FRP-to-concrete bonded interfaces has been investigated and potential degradation mechanisms are discussed, as well as experimental methodologies and research needs.
Journal ArticleDOI

Effect of elevated temperature environments on the residual axial capacity of RC columns strengthened with different techniques

TL;DR: In this paper, the effect of different elevated temperature environments on performance of reinforced concrete (RC) circular columns strengthened with different techniques was examined, and the behavior and failure modes of different column groups exposed to high degrees of temperature are presented.
Journal ArticleDOI

Moisture-induced degradation of interfacial bond in FRP-strengthened masonry

TL;DR: In this article, an experimental investigation on the effect of long-term (one year) water immersion on the performance of GFRP-strengthened bricks is presented. But the results of the experiments are limited to a single-lap shear bond.
References
More filters
Journal ArticleDOI

Theoretical stress strain model for confined concrete

TL;DR: In this paper, a stress-strain model for concrete subjected to uniaxial compressive loading and confined by transverse reinforcement is developed for concrete sections with either spiral or circular hoops, or rectangular hoops with or without supplementary cross ties.
MonographDOI

Seismic Design of Reinforced Concrete and Masonry Buildings

TL;DR: In this paper, the causes and effects of earthquakes: Seismicity, Structural Response, Seismic Action, and Seismical Action in Member Design principles of member design.
Book

Seismic Design and Retrofit of Bridges

TL;DR: In this article, the authors focus on designing adequate displacement and ductility capacity into new bridges, with less significance placed on strength, where a strength hierarchy is established in a bridge to ensure that damage is controllable and occurs only where the designer intends.
Journal ArticleDOI

Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review

TL;DR: A concise state-of-the-art survey of fiber-reinforced polymer composites for construction applications in civil engineering is presented in this article, which includes a historical review, the current state of the art, and future challenges.

Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review

TL;DR: A concise state-of-the-art survey of fiber-reinforced polymer composites for construction applications in civil engineering is presented in this article, which includes a historical review, the current state of the art, and future challenges.
Related Papers (5)