scispace - formally typeset
Open Access

Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures

TLDR
The Emerging Technology Series as mentioned in this paper is a series of information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members, with a focus on the development and appropriate use of new and emerging technologies.
Abstract
*Co-chairs of the subcommittee that prepared this document. Note: The committee acknowledges the contribution of associate member Paul Kelley. ACI encourages the development and appropriate use of new and emerging technologies through the publication of the Emerging Technology Series. This series presents information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members. The presented information and recommendations, and their basis, may be less fully developed and tested than those for more mature technologies. This report identifies areas in which information is believed to be less fully developed, and describes research needs. The professional using this document should understand the limitations of this document and exercise judgment as to the appropriate application of this emerging technology.

read more

Content maybe subject to copyright    Report

Citations
More filters
Journal ArticleDOI

Reliability Assessment of FRP-Strengthened Concrete Bridge Girders in Shear

TL;DR: In this paper, the reliability of reinforced concrete bridge girders strengthened in shear using fiber-reinforced polymers (FRP) was investigated for two distinct cases, namely, bonded and anchored FRP reinforcement.
Journal ArticleDOI

Flexural reinforcement of glulam beams with CFRP plates

TL;DR: In this article, an experimental study carried out in order to demonstrate the effective use of carbon fiber reinforced polymer (CFRP) plates as flexural reinforcement of glulam beams was performed.
Journal ArticleDOI

Hybrid FRP jacketing for enhanced confinement of circular concrete columns in compression

TL;DR: In this paper, the performance of an innovative confining unidirectional hybrid FRP solution for circular concrete columns, exploiting the hybrid effect and pseudoductility of FRP jackets made of different fibres, was evaluated.
Journal ArticleDOI

Axial compressive behavior of grouted concrete block masonry columns confined by CFRP jackets

TL;DR: In this article, the effect of corner radius and the thickness of CFRP jackets on axial strain and axial load capacity of concrete block masonry columns was investigated, and the CNR-DT 200 R1 confinement model was assessed and refined equation was proposed.
Journal ArticleDOI

FRCM/SRG strengthened masonry in diagonal compression: experimental results and analytical approach proposal

TL;DR: The in-plane shear behavior of masonry panels strengthened with Fiber Reinforced Cementitious Matrices or Steel Reinforced Grouts is investigated in this research to propose an improved analytical approach able to predict the maximum capacity.
References
More filters
Journal ArticleDOI

Theoretical stress strain model for confined concrete

TL;DR: In this paper, a stress-strain model for concrete subjected to uniaxial compressive loading and confined by transverse reinforcement is developed for concrete sections with either spiral or circular hoops, or rectangular hoops with or without supplementary cross ties.
MonographDOI

Seismic Design of Reinforced Concrete and Masonry Buildings

TL;DR: In this paper, the causes and effects of earthquakes: Seismicity, Structural Response, Seismic Action, and Seismical Action in Member Design principles of member design.
Book

Seismic Design and Retrofit of Bridges

TL;DR: In this article, the authors focus on designing adequate displacement and ductility capacity into new bridges, with less significance placed on strength, where a strength hierarchy is established in a bridge to ensure that damage is controllable and occurs only where the designer intends.
Journal ArticleDOI

Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review

TL;DR: A concise state-of-the-art survey of fiber-reinforced polymer composites for construction applications in civil engineering is presented in this article, which includes a historical review, the current state of the art, and future challenges.

Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review

TL;DR: A concise state-of-the-art survey of fiber-reinforced polymer composites for construction applications in civil engineering is presented in this article, which includes a historical review, the current state of the art, and future challenges.
Related Papers (5)