Open Access
Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures
Charles E. Bakis,Damian I. Kachlakev,Morris Schupack,P. N. Balaguru,Duane J. Gee,Vistasp M. Karbhari,David Scott,Craig A. Ballinger,T. Russell Gentry,Howard S. Kliger,Rajan Sen,Lawrence C. Bank,Arie Gerritse,James G. Korff,Mohsen Shahawy,Karl Gillette,Michael W. Lee,Carol K. Shield,Brahim Benmokrane,William J. Gold,Ibrahim M. Mahfouz,Khaled Soudki,Gregg J. Blaszak,Charles H. Goodspeed,Henry N. Marsh,R. Taerwe,Gordon L. Brown,F. Grace,Orange S. Marshall,Vicki L. Brown,Mark F. Green,Houssam Toutanji,Thomas I. Campbell,Mark E. Greenwood,Ayman Mosallam,Taketo Uomoto,Charles W. Dolan,Doug D. Gremel,Antoine E. Naaman,Miroslav Vadovic,Michael S. Guglielmo,Antonio Nanni,David R. Vanderpool,Rami M. Elhassan,Issam E. Harik,Kenneth W. Neale,Milan Vatovec,Salem S. Faza,Mark P. Henderson,Stephanie L. Walkup,Edward R. Fyfe,Bohdan N. Horeczko,Max L. Porter,David White,David M. Gale,Srinivasa L. Iyer,Sami H. Rizkalla,John P. Busel +57 more
- pp 1-154
TLDR
The Emerging Technology Series as mentioned in this paper is a series of information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members, with a focus on the development and appropriate use of new and emerging technologies.Abstract:
*Co-chairs of the subcommittee that prepared this document. Note: The committee acknowledges the contribution of associate member Paul Kelley. ACI encourages the development and appropriate use of new and emerging technologies through the publication of the Emerging Technology Series. This series presents information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members. The presented information and recommendations, and their basis, may be less fully developed and tested than those for more mature technologies. This report identifies areas in which information is believed to be less fully developed, and describes research needs. The professional using this document should understand the limitations of this document and exercise judgment as to the appropriate application of this emerging technology.read more
Citations
More filters
Journal ArticleDOI
Experimental and analytical investigation on bond between Carbon-FRCM materials and masonry
TL;DR: In this paper, the carbon-firm reinforced cementitious matrix (FRCM) materials made out of a carbon net embedded in a cement-based matrix and the masonry is experimentally and analytically investigated.
Journal ArticleDOI
Flexural analysis of reinforced concrete beams strengthened with a cement based high strength composite material
TL;DR: In this paper, the structural behaviour of reinforced concrete beams strengthened with a system made by fibre nets embedded into an inorganic stabilized cementitious matrix named Fibre Reinforced Cementitious Mortars (FRCM) was investigated.
Journal ArticleDOI
Strengthening and repair of RC beams with fiber reinforced concrete
TL;DR: In this paper, the use of a jacket made of fiber reinforced concrete with tensile hardening behavior for strengthening RC beams is investigated by means of full-scale tests on 4.55 m long beams.
Journal ArticleDOI
Near surface mounted CFRP laminates for shear strengthening of concrete beams
TL;DR: In this paper, a near surface mounted (NSM) strengthening technique was developed to increase the shear resistance of concrete beams, which is based on fixing, by epoxy adhesive, Carbon Fiber Reinforced Polymer (CFRP) laminates into pre-cut slits opened in the concrete cover of lateral surfaces of the beams.
Journal ArticleDOI
Behavior and capacity of RC beams strengthened in shear with NSM FRP reinforcement
Andrea Rizzo,Laura De Lorenzis +1 more
TL;DR: In this article, a research program on shear strengthening of reinforced concrete (RC) beams with near-surface mounted (NSM) fiber-reinforced polymer (FRP) reinforcement is presented.
References
More filters
Journal ArticleDOI
Theoretical stress strain model for confined concrete
TL;DR: In this paper, a stress-strain model for concrete subjected to uniaxial compressive loading and confined by transverse reinforcement is developed for concrete sections with either spiral or circular hoops, or rectangular hoops with or without supplementary cross ties.
MonographDOI
Seismic Design of Reinforced Concrete and Masonry Buildings
T. Paulay,M. J. N. Priestly +1 more
TL;DR: In this paper, the causes and effects of earthquakes: Seismicity, Structural Response, Seismic Action, and Seismical Action in Member Design principles of member design.
Book
Seismic Design and Retrofit of Bridges
TL;DR: In this article, the authors focus on designing adequate displacement and ductility capacity into new bridges, with less significance placed on strength, where a strength hierarchy is established in a bridge to ensure that damage is controllable and occurs only where the designer intends.
Journal ArticleDOI
Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review
Charles E. Bakis,Lawrence C. Bank,Vicki L. Brown,Edoardo Cosenza,Julio F. Davalos,John J. Lesko,Atsuhiko Machida,Sami H. Rizkalla,Thanasis Triantafillou +8 more
TL;DR: A concise state-of-the-art survey of fiber-reinforced polymer composites for construction applications in civil engineering is presented in this article, which includes a historical review, the current state of the art, and future challenges.
Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review
Charles E. Bakis,Lawrence C. Bank,Vicki L. Brown,Edoardo Cosenza,Julio F. Davalos,John J. Lesko,Atsuhiko Machida,Sami H. Rizkalla,Thanasis Triantafillou +8 more
TL;DR: A concise state-of-the-art survey of fiber-reinforced polymer composites for construction applications in civil engineering is presented in this article, which includes a historical review, the current state of the art, and future challenges.
Related Papers (5)
Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures (ACI 440.2R-02)
K. Soudki,T. Alkhrdaji +1 more
Externally bonded FRP reinforcement for RC structures
Thanasis Triantafillou,Stijn Matthys,Katrien Audenaert,György L. Balázs,M. Blaschko,Hendrik Blontrock,Christoph Czaderski,Emmanuelle David,Angello Di Tomasso,William Duckett,Dick Hordijk,Michael Leeming,Heinz Meier,Giorgio Monti,Richard Moss,Uwe Neubauer,Roland Niedermeier,Björn Täljsten,G. Zehetmaier,Konrad Zilch +19 more