scispace - formally typeset
Open Access

Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures

TLDR
The Emerging Technology Series as mentioned in this paper is a series of information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members, with a focus on the development and appropriate use of new and emerging technologies.
Abstract
*Co-chairs of the subcommittee that prepared this document. Note: The committee acknowledges the contribution of associate member Paul Kelley. ACI encourages the development and appropriate use of new and emerging technologies through the publication of the Emerging Technology Series. This series presents information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members. The presented information and recommendations, and their basis, may be less fully developed and tested than those for more mature technologies. This report identifies areas in which information is believed to be less fully developed, and describes research needs. The professional using this document should understand the limitations of this document and exercise judgment as to the appropriate application of this emerging technology.

read more

Content maybe subject to copyright    Report

Citations
More filters
Journal ArticleDOI

Behavior of RC Beams Shear Strengthened with Bonded or Unbonded FRP Wraps

TL;DR: In this paper, the fiber-reinforced polymer (FRP) was used to estimate the contribution of FRP to shear resistance of reinforced concrete reinforced concrete (RC) beams.
Journal ArticleDOI

Experimental tests for the characterization of sisal fiber-reinforced cementitious matrix for strengthening masonry structures

TL;DR: In this paper, the experimental characterization of a Natural Fiber Reinforced Cementitious Matrix (NFRCM) made of sisal fibers yarns impregnated with a water-based resin and embedded in an inorganic matrix based on natural lime is presented.
Journal ArticleDOI

Application of FRP laminates for strengthening of a reinforced-concrete T-beam bridge structure

TL;DR: In this paper, a fiber-reinforced polymer (FRP) composite laminates were used to strengthen an aging reinforced-concrete T-beam bridge in South Troy, Rensselaer County, New York.
Journal ArticleDOI

Compressive behavior of double-tube concrete columns with an outer square FRP tube and an inner circular high-strength steel tube

TL;DR: In this article, the axial compressive behavior of double-tube concrete columns (DTCCs) with an outer square FRP tube was tested under axial compression, and the experimental results showed that, in square DTCCs, the concrete is well confined by both the outer fiber-reinforced polymer (FRP) tube and the inner circular high-strength steel (HSS) tube, leading to an excellent column performance.
References
More filters
Journal ArticleDOI

Theoretical stress strain model for confined concrete

TL;DR: In this paper, a stress-strain model for concrete subjected to uniaxial compressive loading and confined by transverse reinforcement is developed for concrete sections with either spiral or circular hoops, or rectangular hoops with or without supplementary cross ties.
MonographDOI

Seismic Design of Reinforced Concrete and Masonry Buildings

TL;DR: In this paper, the causes and effects of earthquakes: Seismicity, Structural Response, Seismic Action, and Seismical Action in Member Design principles of member design.
Book

Seismic Design and Retrofit of Bridges

TL;DR: In this article, the authors focus on designing adequate displacement and ductility capacity into new bridges, with less significance placed on strength, where a strength hierarchy is established in a bridge to ensure that damage is controllable and occurs only where the designer intends.
Journal ArticleDOI

Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review

TL;DR: A concise state-of-the-art survey of fiber-reinforced polymer composites for construction applications in civil engineering is presented in this article, which includes a historical review, the current state of the art, and future challenges.

Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review

TL;DR: A concise state-of-the-art survey of fiber-reinforced polymer composites for construction applications in civil engineering is presented in this article, which includes a historical review, the current state of the art, and future challenges.
Related Papers (5)