scispace - formally typeset
Open Access

Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures

TLDR
The Emerging Technology Series as mentioned in this paper is a series of information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members, with a focus on the development and appropriate use of new and emerging technologies.
Abstract
*Co-chairs of the subcommittee that prepared this document. Note: The committee acknowledges the contribution of associate member Paul Kelley. ACI encourages the development and appropriate use of new and emerging technologies through the publication of the Emerging Technology Series. This series presents information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members. The presented information and recommendations, and their basis, may be less fully developed and tested than those for more mature technologies. This report identifies areas in which information is believed to be less fully developed, and describes research needs. The professional using this document should understand the limitations of this document and exercise judgment as to the appropriate application of this emerging technology.

read more

Content maybe subject to copyright    Report

Citations
More filters
Journal ArticleDOI

Flexural and Interfacial Behavior of FRP-Strengthened Reinforced Concrete Beams

TL;DR: In this paper, two-dimensional and three-dimensional (3D) nonlinear displacement-controlled finite element (FE) models are developed to investigate the flexural and fiber-reinforced polymer (FRP)/concrete interfacial responses of reinforced concrete beams.
Journal ArticleDOI

Three-Dimensional Finite-Element Analysis of FRP-Confined Circular Concrete Columns under Eccentric Loading

TL;DR: Fiber-reinforced polymer (FRP) jacketing/wrapping has become a widely accepted technique for strengthening/retrofitting reinforced concrete (RC) columns as mentioned in this paper.
Journal ArticleDOI

Experimental Response of Externally Retrofitted Masonry Walls Subjected to Shear Loading

TL;DR: In this article, the authors presented an analysis of the experimental results and simple equations to estimate the cracking load and the maximum shear strength of clay brick masonry walls, retrofitted with carbon fiber.
Journal ArticleDOI

Modeling the behavior of fiber reinforced polymer-confined concrete columns exposed to fire

TL;DR: In this article, a numerical model for evaluating the fire behavior of conventionally reinforced circular concrete columns, FRP-wrapped reinforced concrete columns and insulated FRP -wrapped concrete columns is presented.
Journal ArticleDOI

Effects of hygrothermal conditioning on epoxy adhesives used in FRP composites

TL;DR: In this article, the authors investigated the effects of such environments on the curing kinetics of epoxy and discussed the competing effects of plasticization and post-cure during accelerated conditioning.
References
More filters
Journal ArticleDOI

Theoretical stress strain model for confined concrete

TL;DR: In this paper, a stress-strain model for concrete subjected to uniaxial compressive loading and confined by transverse reinforcement is developed for concrete sections with either spiral or circular hoops, or rectangular hoops with or without supplementary cross ties.
MonographDOI

Seismic Design of Reinforced Concrete and Masonry Buildings

TL;DR: In this paper, the causes and effects of earthquakes: Seismicity, Structural Response, Seismic Action, and Seismical Action in Member Design principles of member design.
Book

Seismic Design and Retrofit of Bridges

TL;DR: In this article, the authors focus on designing adequate displacement and ductility capacity into new bridges, with less significance placed on strength, where a strength hierarchy is established in a bridge to ensure that damage is controllable and occurs only where the designer intends.
Journal ArticleDOI

Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review

TL;DR: A concise state-of-the-art survey of fiber-reinforced polymer composites for construction applications in civil engineering is presented in this article, which includes a historical review, the current state of the art, and future challenges.

Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review

TL;DR: A concise state-of-the-art survey of fiber-reinforced polymer composites for construction applications in civil engineering is presented in this article, which includes a historical review, the current state of the art, and future challenges.
Related Papers (5)