Open Access
Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures
Charles E. Bakis,Damian I. Kachlakev,Morris Schupack,P. N. Balaguru,Duane J. Gee,Vistasp M. Karbhari,David Scott,Craig A. Ballinger,T. Russell Gentry,Howard S. Kliger,Rajan Sen,Lawrence C. Bank,Arie Gerritse,James G. Korff,Mohsen Shahawy,Karl Gillette,Michael W. Lee,Carol K. Shield,Brahim Benmokrane,William J. Gold,Ibrahim M. Mahfouz,Khaled Soudki,Gregg J. Blaszak,Charles H. Goodspeed,Henry N. Marsh,R. Taerwe,Gordon L. Brown,F. Grace,Orange S. Marshall,Vicki L. Brown,Mark F. Green,Houssam Toutanji,Thomas I. Campbell,Mark E. Greenwood,Ayman Mosallam,Taketo Uomoto,Charles W. Dolan,Doug D. Gremel,Antoine E. Naaman,Miroslav Vadovic,Michael S. Guglielmo,Antonio Nanni,David R. Vanderpool,Rami M. Elhassan,Issam E. Harik,Kenneth W. Neale,Milan Vatovec,Salem S. Faza,Mark P. Henderson,Stephanie L. Walkup,Edward R. Fyfe,Bohdan N. Horeczko,Max L. Porter,David White,David M. Gale,Srinivasa L. Iyer,Sami H. Rizkalla,John P. Busel +57 more
- pp 1-154
TLDR
The Emerging Technology Series as mentioned in this paper is a series of information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members, with a focus on the development and appropriate use of new and emerging technologies.Abstract:
*Co-chairs of the subcommittee that prepared this document. Note: The committee acknowledges the contribution of associate member Paul Kelley. ACI encourages the development and appropriate use of new and emerging technologies through the publication of the Emerging Technology Series. This series presents information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members. The presented information and recommendations, and their basis, may be less fully developed and tested than those for more mature technologies. This report identifies areas in which information is believed to be less fully developed, and describes research needs. The professional using this document should understand the limitations of this document and exercise judgment as to the appropriate application of this emerging technology.read more
Citations
More filters
Journal ArticleDOI
Structural behaviour of RC beams externally strengthened with FRP sheets under fatigue and monotonic loading
TL;DR: In this article, the fatigue and post-fatigue static behavior of reinforced concrete beams strengthened with glass or carbon fibre reinforced polymer (FRP) sheets placed either vertically or obliquely was investigated.
Journal ArticleDOI
Experimental evaluation of the fire behaviour of insulated fibre-reinforced-polymer-strengthened reinforced concrete columns
TL;DR: In this article, the authors present results from full-scale fire resistance experiments on three insulated FRP-strengthened reinforced concrete (RC) columns and make a comparison between the fire performances of these columns and conventional unstrained RC columns.
Journal ArticleDOI
Edge debonding in FRP strengthened beams: Stress versus energy failure criteria
TL;DR: In this article, two failure criteria are proposed to study the debonding mechanism of a beam strengthened by a fiber reinforced polymer strip, i.e., stress assessment and fracture mechanics.
Journal ArticleDOI
Strengthening with FRP bars of URM walls subject to out-of-plane loads
TL;DR: In this paper, the authors present the results of an experimental program on the flexural behavior of un-reinforced masonry (URM) walls strengthened with near surface mounted (NSM) fiber reinforced polymers (FRP) bars.
Journal ArticleDOI
Behavior of FRP-confined concrete after high temperature exposure
TL;DR: In this paper, the effect of high temperature on the performance of concrete externally confined with FRP sheets was investigated, and it was concluded that significant degradation in the bond strength occurred at a temperature of 200°C especially for CFRP-overlaid specimens.
References
More filters
Journal ArticleDOI
Theoretical stress strain model for confined concrete
TL;DR: In this paper, a stress-strain model for concrete subjected to uniaxial compressive loading and confined by transverse reinforcement is developed for concrete sections with either spiral or circular hoops, or rectangular hoops with or without supplementary cross ties.
MonographDOI
Seismic Design of Reinforced Concrete and Masonry Buildings
T. Paulay,M. J. N. Priestly +1 more
TL;DR: In this paper, the causes and effects of earthquakes: Seismicity, Structural Response, Seismic Action, and Seismical Action in Member Design principles of member design.
Book
Seismic Design and Retrofit of Bridges
TL;DR: In this article, the authors focus on designing adequate displacement and ductility capacity into new bridges, with less significance placed on strength, where a strength hierarchy is established in a bridge to ensure that damage is controllable and occurs only where the designer intends.
Journal ArticleDOI
Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review
Charles E. Bakis,Lawrence C. Bank,Vicki L. Brown,Edoardo Cosenza,Julio F. Davalos,John J. Lesko,Atsuhiko Machida,Sami H. Rizkalla,Thanasis Triantafillou +8 more
TL;DR: A concise state-of-the-art survey of fiber-reinforced polymer composites for construction applications in civil engineering is presented in this article, which includes a historical review, the current state of the art, and future challenges.
Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review
Charles E. Bakis,Lawrence C. Bank,Vicki L. Brown,Edoardo Cosenza,Julio F. Davalos,John J. Lesko,Atsuhiko Machida,Sami H. Rizkalla,Thanasis Triantafillou +8 more
TL;DR: A concise state-of-the-art survey of fiber-reinforced polymer composites for construction applications in civil engineering is presented in this article, which includes a historical review, the current state of the art, and future challenges.
Related Papers (5)
Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures (ACI 440.2R-02)
K. Soudki,T. Alkhrdaji +1 more
Externally bonded FRP reinforcement for RC structures
Thanasis Triantafillou,Stijn Matthys,Katrien Audenaert,György L. Balázs,M. Blaschko,Hendrik Blontrock,Christoph Czaderski,Emmanuelle David,Angello Di Tomasso,William Duckett,Dick Hordijk,Michael Leeming,Heinz Meier,Giorgio Monti,Richard Moss,Uwe Neubauer,Roland Niedermeier,Björn Täljsten,G. Zehetmaier,Konrad Zilch +19 more