scispace - formally typeset
Open Access

Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures

TLDR
The Emerging Technology Series as mentioned in this paper is a series of information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members, with a focus on the development and appropriate use of new and emerging technologies.
Abstract
*Co-chairs of the subcommittee that prepared this document. Note: The committee acknowledges the contribution of associate member Paul Kelley. ACI encourages the development and appropriate use of new and emerging technologies through the publication of the Emerging Technology Series. This series presents information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members. The presented information and recommendations, and their basis, may be less fully developed and tested than those for more mature technologies. This report identifies areas in which information is believed to be less fully developed, and describes research needs. The professional using this document should understand the limitations of this document and exercise judgment as to the appropriate application of this emerging technology.

read more

Content maybe subject to copyright    Report

Citations
More filters
Journal ArticleDOI

Experimental Characterization of Concrete-Epoxy Interfaces

TL;DR: In this article, splitting tensile and three-point bending tests were used to determine the tensile strength ( ft ), the size effect fracture energy ( Gf ), and the cohesive fracture energy of two concrete-epoxy interfaces.
Journal ArticleDOI

Assessment of the flexural behavior of continuous RC beams strengthened with NSM-FRP bars, experimental and analytical study

TL;DR: In this paper, the authors deal with strengthening statically indeterminate reinforced concrete (RC) beams with carbon and glass Fiber Reinforced Polymers (FRP) rods by using the Near Surface Mounted (NSM) technique.
Journal ArticleDOI

Structural behaviour of pre-damaged reinforced concrete beams strengthened with natural fibre reinforced polymer composites

TL;DR: In this article, the use of natural jute fabric reinforced polymer (JFRP) composite sheets as external strengthening material of reinforced concrete (RC) beams was examined and the results revealed that JFRP can significantly improve the shear strength capacity of beams.
Journal ArticleDOI

Experimental investigations on reinforced concrete shear walls strengthened with basalt fiber-reinforced polymers under cyclic load

TL;DR: In this article, the authors investigated the performance of reinforced concrete shear walls with basalt fiber reinforced polymer (BFRP) strips in terms of failure modes, displacement ductility ratio, stiffness characteristic, energy dissipation capacity, and load carrying capacity.
Journal ArticleDOI

Seismic Behavior of RC Columns with Bond-Critical Regions: Criteria for Bond Strengthening Using External FRP Jackets

TL;DR: In this paper, a nonlinear analysis model is developed for predicting the envelope load-drift response, taking into account the effect of external fiber-reinforced polymer (FRP) confinement on the stress-strain behavior of reinforced-concrete columns in compression.
References
More filters
Journal ArticleDOI

Theoretical stress strain model for confined concrete

TL;DR: In this paper, a stress-strain model for concrete subjected to uniaxial compressive loading and confined by transverse reinforcement is developed for concrete sections with either spiral or circular hoops, or rectangular hoops with or without supplementary cross ties.
MonographDOI

Seismic Design of Reinforced Concrete and Masonry Buildings

TL;DR: In this paper, the causes and effects of earthquakes: Seismicity, Structural Response, Seismic Action, and Seismical Action in Member Design principles of member design.
Book

Seismic Design and Retrofit of Bridges

TL;DR: In this article, the authors focus on designing adequate displacement and ductility capacity into new bridges, with less significance placed on strength, where a strength hierarchy is established in a bridge to ensure that damage is controllable and occurs only where the designer intends.
Journal ArticleDOI

Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review

TL;DR: A concise state-of-the-art survey of fiber-reinforced polymer composites for construction applications in civil engineering is presented in this article, which includes a historical review, the current state of the art, and future challenges.

Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review

TL;DR: A concise state-of-the-art survey of fiber-reinforced polymer composites for construction applications in civil engineering is presented in this article, which includes a historical review, the current state of the art, and future challenges.
Related Papers (5)