scispace - formally typeset
Open Access

Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures

TLDR
The Emerging Technology Series as mentioned in this paper is a series of information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members, with a focus on the development and appropriate use of new and emerging technologies.
Abstract
*Co-chairs of the subcommittee that prepared this document. Note: The committee acknowledges the contribution of associate member Paul Kelley. ACI encourages the development and appropriate use of new and emerging technologies through the publication of the Emerging Technology Series. This series presents information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members. The presented information and recommendations, and their basis, may be less fully developed and tested than those for more mature technologies. This report identifies areas in which information is believed to be less fully developed, and describes research needs. The professional using this document should understand the limitations of this document and exercise judgment as to the appropriate application of this emerging technology.

read more

Content maybe subject to copyright    Report

Citations
More filters
Journal ArticleDOI

Study of Brick Masonry Columns Confined with CFRP Composite

TL;DR: In this article, some theoretical relationships available in literature are analyzed, regarding the evaluation of confinement effect on wrapped masonry columns, comparing the theoretical values with unixial and triaxial experimental test results.
Journal ArticleDOI

Effect of wet-dry cycles on the bond behaviour of concrete elements strengthened with NSM CFRP laminate strips

TL;DR: In this article, the authors acknowledge the grant SFRH/BD/80338/2011 provided by FCT and S&P Clever Reinforcement Iberica Lda and SECIL.
Journal ArticleDOI

Time-variant flexural reliability of RC beams with externally bonded CFRP under combined fatigue-corrosion actions

TL;DR: Time-variant reliability analysis of RC highway bridges strengthened with carbon fibre reinforced polymer CFRP laminates under four possible competing damage modes has shown that the reliability is very sensitive to factors governing the corrosion.
Journal ArticleDOI

Structural performance of RC shear walls with post-construction openings strengthened with FRP composite laminates

TL;DR: In this article, the structural performance of reinforced concrete shear walls, with different opening geometries strengthened with fiber-reinforced-polymer (FRP) carbon/epoxy composites laminates, was evaluated.
Journal ArticleDOI

Fatigue Performance of CFRP Strengthened RC Beams under Environmental Conditioning and Sustained Load

TL;DR: In this paper, an experimental program has been carried out to investigate the fatigue behavior, under a load range, which generates service load stress levels, of reinforced concrete RC beams strengthened with CFRP fabrics.
References
More filters
Journal ArticleDOI

Theoretical stress strain model for confined concrete

TL;DR: In this paper, a stress-strain model for concrete subjected to uniaxial compressive loading and confined by transverse reinforcement is developed for concrete sections with either spiral or circular hoops, or rectangular hoops with or without supplementary cross ties.
MonographDOI

Seismic Design of Reinforced Concrete and Masonry Buildings

TL;DR: In this paper, the causes and effects of earthquakes: Seismicity, Structural Response, Seismic Action, and Seismical Action in Member Design principles of member design.
Book

Seismic Design and Retrofit of Bridges

TL;DR: In this article, the authors focus on designing adequate displacement and ductility capacity into new bridges, with less significance placed on strength, where a strength hierarchy is established in a bridge to ensure that damage is controllable and occurs only where the designer intends.
Journal ArticleDOI

Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review

TL;DR: A concise state-of-the-art survey of fiber-reinforced polymer composites for construction applications in civil engineering is presented in this article, which includes a historical review, the current state of the art, and future challenges.

Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review

TL;DR: A concise state-of-the-art survey of fiber-reinforced polymer composites for construction applications in civil engineering is presented in this article, which includes a historical review, the current state of the art, and future challenges.
Related Papers (5)