scispace - formally typeset
Open Access

Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures

TLDR
The Emerging Technology Series as mentioned in this paper is a series of information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members, with a focus on the development and appropriate use of new and emerging technologies.
Abstract
*Co-chairs of the subcommittee that prepared this document. Note: The committee acknowledges the contribution of associate member Paul Kelley. ACI encourages the development and appropriate use of new and emerging technologies through the publication of the Emerging Technology Series. This series presents information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members. The presented information and recommendations, and their basis, may be less fully developed and tested than those for more mature technologies. This report identifies areas in which information is believed to be less fully developed, and describes research needs. The professional using this document should understand the limitations of this document and exercise judgment as to the appropriate application of this emerging technology.

read more

Content maybe subject to copyright    Report

Citations
More filters
Journal ArticleDOI

An experimental investigation on flexural behavior of RC beams strengthened with prestressed CFRP strips using a durable anchorage system

TL;DR: In this article, the effectiveness and feasibility of a prestressed carbon fiber-reinforced polymer (CFRP) system for strengthening reinforced concrete (RC) beams is investigated.
Journal ArticleDOI

Experimental investigation on flexural behavior of timber beams repaired with CFRP plates

TL;DR: In this paper, an experimental investigation on timber beams repaired and strengthened with carbon fiber reinforced polymer (CFRP) plates is presented, which involved six new timber beams and six old timber beams removed from the floor of an ancient historical building.
Journal ArticleDOI

A State-of-the-Art Review on Debonding Failures of FRP Laminates Externally Adhered to Concrete

TL;DR: In this article, a review of previous research programs conducted by other researchers were reviewed in terms of debonding failure of fiber-reinforced polymer (FRP) laminates externally attached to concrete.
Journal ArticleDOI

Finite element modelling and dilation of FRP-confined concrete columns

TL;DR: In this article, the authors presented a simple empirical model predicting the confined concrete dilation parameter within the theoretical framework of a Karagozian and Case type concrete plasticity model, which was able to predict stress-strain curves of the test specimens quite well.
Journal ArticleDOI

Mechanical characterization of fibre reinforced polymers materials at high temperature

TL;DR: In this paper, the mechanical properties of fiber reinforced polymer (FRP) composites at high temperature exposure were investigated and an analytical model was presented to characterize the mechanical performance at elevated temperature.
References
More filters
Journal ArticleDOI

Theoretical stress strain model for confined concrete

TL;DR: In this paper, a stress-strain model for concrete subjected to uniaxial compressive loading and confined by transverse reinforcement is developed for concrete sections with either spiral or circular hoops, or rectangular hoops with or without supplementary cross ties.
MonographDOI

Seismic Design of Reinforced Concrete and Masonry Buildings

TL;DR: In this paper, the causes and effects of earthquakes: Seismicity, Structural Response, Seismic Action, and Seismical Action in Member Design principles of member design.
Book

Seismic Design and Retrofit of Bridges

TL;DR: In this article, the authors focus on designing adequate displacement and ductility capacity into new bridges, with less significance placed on strength, where a strength hierarchy is established in a bridge to ensure that damage is controllable and occurs only where the designer intends.
Journal ArticleDOI

Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review

TL;DR: A concise state-of-the-art survey of fiber-reinforced polymer composites for construction applications in civil engineering is presented in this article, which includes a historical review, the current state of the art, and future challenges.

Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review

TL;DR: A concise state-of-the-art survey of fiber-reinforced polymer composites for construction applications in civil engineering is presented in this article, which includes a historical review, the current state of the art, and future challenges.
Related Papers (5)