Open Access
Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures
Charles E. Bakis,Damian I. Kachlakev,Morris Schupack,P. N. Balaguru,Duane J. Gee,Vistasp M. Karbhari,David Scott,Craig A. Ballinger,T. Russell Gentry,Howard S. Kliger,Rajan Sen,Lawrence C. Bank,Arie Gerritse,James G. Korff,Mohsen Shahawy,Karl Gillette,Michael W. Lee,Carol K. Shield,Brahim Benmokrane,William J. Gold,Ibrahim M. Mahfouz,Khaled Soudki,Gregg J. Blaszak,Charles H. Goodspeed,Henry N. Marsh,R. Taerwe,Gordon L. Brown,F. Grace,Orange S. Marshall,Vicki L. Brown,Mark F. Green,Houssam Toutanji,Thomas I. Campbell,Mark E. Greenwood,Ayman Mosallam,Taketo Uomoto,Charles W. Dolan,Doug D. Gremel,Antoine E. Naaman,Miroslav Vadovic,Michael S. Guglielmo,Antonio Nanni,David R. Vanderpool,Rami M. Elhassan,Issam E. Harik,Kenneth W. Neale,Milan Vatovec,Salem S. Faza,Mark P. Henderson,Stephanie L. Walkup,Edward R. Fyfe,Bohdan N. Horeczko,Max L. Porter,David White,David M. Gale,Srinivasa L. Iyer,Sami H. Rizkalla,John P. Busel +57 more
- pp 1-154
TLDR
The Emerging Technology Series as mentioned in this paper is a series of information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members, with a focus on the development and appropriate use of new and emerging technologies.Abstract:
*Co-chairs of the subcommittee that prepared this document. Note: The committee acknowledges the contribution of associate member Paul Kelley. ACI encourages the development and appropriate use of new and emerging technologies through the publication of the Emerging Technology Series. This series presents information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members. The presented information and recommendations, and their basis, may be less fully developed and tested than those for more mature technologies. This report identifies areas in which information is believed to be less fully developed, and describes research needs. The professional using this document should understand the limitations of this document and exercise judgment as to the appropriate application of this emerging technology.read more
Citations
More filters
Journal ArticleDOI
Experimental and nonlinear finite element studies of RC beams strengthened with FRP plates
TL;DR: In this paper, the brittle failure modes of RC members strengthened in flexure by FRP plates are studied and the finite element analyses are based on nonlinear fracture mechanics, and the actual crack pattern observed in the tests by using a smeared and an interface crack model.
Journal ArticleDOI
Improving seismic performance of deficient reinforced concrete columns using carbon fiber-reinforced polymers
TL;DR: In this article, the use of carbon fiber-reinforced polymer (CFRP) wrapping as a method of retrofitting nonductile square reinforced concrete columns with low strength concrete and plain bars was investigated.
Journal ArticleDOI
Durability of bonded FRP-to-steel joints: Effects of moisture, de-icing salt solution, temperature and FRP type
TL;DR: In this article, the effects of environmental ageing on the mechanical response of double-lap shear joints made of steel and CFRP or GFRP adherents were investigated and the joint-level results were compared with the most relevant durability data in the literature.
Journal ArticleDOI
Fatigue Behavior of Externally Strengthened Concrete Beams with Fiber-Reinforced Polymers: State of the Art
TL;DR: In this paper, the authors present the recent progress and achievement in the application of fiber-reinforced polymers (FRP) on strengthening reinforced/prestressed concrete beams subjected to fatigue loading.
Journal ArticleDOI
FRP composites for shear strengthening of reinforced concrete deep beams with openings
Tamer El Maaddawy,Sayed Sherif +1 more
TL;DR: In this paper, the authors examined the potential use of externally bonded carbon fiber reinforced polymer (CFRP) composite sheets as a strengthening solution to upgrade reinforced concrete (RC) deep beams with openings.
References
More filters
Journal ArticleDOI
Theoretical stress strain model for confined concrete
TL;DR: In this paper, a stress-strain model for concrete subjected to uniaxial compressive loading and confined by transverse reinforcement is developed for concrete sections with either spiral or circular hoops, or rectangular hoops with or without supplementary cross ties.
MonographDOI
Seismic Design of Reinforced Concrete and Masonry Buildings
T. Paulay,M. J. N. Priestly +1 more
TL;DR: In this paper, the causes and effects of earthquakes: Seismicity, Structural Response, Seismic Action, and Seismical Action in Member Design principles of member design.
Book
Seismic Design and Retrofit of Bridges
TL;DR: In this article, the authors focus on designing adequate displacement and ductility capacity into new bridges, with less significance placed on strength, where a strength hierarchy is established in a bridge to ensure that damage is controllable and occurs only where the designer intends.
Journal ArticleDOI
Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review
Charles E. Bakis,Lawrence C. Bank,Vicki L. Brown,Edoardo Cosenza,Julio F. Davalos,John J. Lesko,Atsuhiko Machida,Sami H. Rizkalla,Thanasis Triantafillou +8 more
TL;DR: A concise state-of-the-art survey of fiber-reinforced polymer composites for construction applications in civil engineering is presented in this article, which includes a historical review, the current state of the art, and future challenges.
Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review
Charles E. Bakis,Lawrence C. Bank,Vicki L. Brown,Edoardo Cosenza,Julio F. Davalos,John J. Lesko,Atsuhiko Machida,Sami H. Rizkalla,Thanasis Triantafillou +8 more
TL;DR: A concise state-of-the-art survey of fiber-reinforced polymer composites for construction applications in civil engineering is presented in this article, which includes a historical review, the current state of the art, and future challenges.
Related Papers (5)
Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures (ACI 440.2R-02)
K. Soudki,T. Alkhrdaji +1 more
Externally bonded FRP reinforcement for RC structures
Thanasis Triantafillou,Stijn Matthys,Katrien Audenaert,György L. Balázs,M. Blaschko,Hendrik Blontrock,Christoph Czaderski,Emmanuelle David,Angello Di Tomasso,William Duckett,Dick Hordijk,Michael Leeming,Heinz Meier,Giorgio Monti,Richard Moss,Uwe Neubauer,Roland Niedermeier,Björn Täljsten,G. Zehetmaier,Konrad Zilch +19 more