Open Access
Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures
Charles E. Bakis,Damian I. Kachlakev,Morris Schupack,P. N. Balaguru,Duane J. Gee,Vistasp M. Karbhari,David Scott,Craig A. Ballinger,T. Russell Gentry,Howard S. Kliger,Rajan Sen,Lawrence C. Bank,Arie Gerritse,James G. Korff,Mohsen Shahawy,Karl Gillette,Michael W. Lee,Carol K. Shield,Brahim Benmokrane,William J. Gold,Ibrahim M. Mahfouz,Khaled Soudki,Gregg J. Blaszak,Charles H. Goodspeed,Henry N. Marsh,R. Taerwe,Gordon L. Brown,F. Grace,Orange S. Marshall,Vicki L. Brown,Mark F. Green,Houssam Toutanji,Thomas I. Campbell,Mark E. Greenwood,Ayman Mosallam,Taketo Uomoto,Charles W. Dolan,Doug D. Gremel,Antoine E. Naaman,Miroslav Vadovic,Michael S. Guglielmo,Antonio Nanni,David R. Vanderpool,Rami M. Elhassan,Issam E. Harik,Kenneth W. Neale,Milan Vatovec,Salem S. Faza,Mark P. Henderson,Stephanie L. Walkup,Edward R. Fyfe,Bohdan N. Horeczko,Max L. Porter,David White,David M. Gale,Srinivasa L. Iyer,Sami H. Rizkalla,John P. Busel +57 more
- pp 1-154
TLDR
The Emerging Technology Series as mentioned in this paper is a series of information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members, with a focus on the development and appropriate use of new and emerging technologies.Abstract:
*Co-chairs of the subcommittee that prepared this document. Note: The committee acknowledges the contribution of associate member Paul Kelley. ACI encourages the development and appropriate use of new and emerging technologies through the publication of the Emerging Technology Series. This series presents information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members. The presented information and recommendations, and their basis, may be less fully developed and tested than those for more mature technologies. This report identifies areas in which information is believed to be less fully developed, and describes research needs. The professional using this document should understand the limitations of this document and exercise judgment as to the appropriate application of this emerging technology.read more
Citations
More filters
Journal ArticleDOI
Design approach for FRP spike anchors in FRP-strengthened RC structures
TL;DR: A critical review of the design models available in the literature is presented in addition to a design methodology for the incorporation of FRP spike anchors in RC structures strengthened with FRP composites.
Journal ArticleDOI
Analytical approach for the flexural analysis of RC beams strengthened with prestressed CFRP
TL;DR: In this article, a simplified analytical approach is proposed to predict the flexural behavior of simply supported reinforced-concrete (RC) beams flexurally strengthened with prestressed carbon fiber reinforced polymer (CFRP) reinforcements using either externally bonded reinforcing (EBR) or near surface mounted (NSM) techniques.
Journal ArticleDOI
Heat transfer and structural response modelling of FRP confined rectangular concrete columns in fire
TL;DR: In this paper, the authors present a computational model that can simulate the structural behavior of a short or slender, concentrically or eccentrically loaded, unwrapped or FRP wrapped column under both ambient and fire conditions.
Journal ArticleDOI
Experimental Investigation of FRP-Concrete Debonding under Cyclic Actions
TL;DR: In this paper, a series of single shear tests under both monotonic and cyclic actions, without inversion of sign, were performed on concrete prismatic specimens reinforced with carbon FRP (CFRP) sheets or plates.
Journal ArticleDOI
Design and testing of an adhesively bonded CFRP strengthening system for steel structures
Sylvain Chataigner,Karim Benzarti,Gilles Foret,Jean-François Caron,G. Gemignani,M. Brugiolo,Inigo Calderon,Ignacio Piñero,Veit Birtel,Frank Lehmann +9 more
TL;DR: In this article, the authors presented the main specifications that should be adopted in the design of CFRP strengthening systems applied to steel structures, and that were identified from an extensive literature survey.
References
More filters
Journal ArticleDOI
Theoretical stress strain model for confined concrete
TL;DR: In this paper, a stress-strain model for concrete subjected to uniaxial compressive loading and confined by transverse reinforcement is developed for concrete sections with either spiral or circular hoops, or rectangular hoops with or without supplementary cross ties.
MonographDOI
Seismic Design of Reinforced Concrete and Masonry Buildings
T. Paulay,M. J. N. Priestly +1 more
TL;DR: In this paper, the causes and effects of earthquakes: Seismicity, Structural Response, Seismic Action, and Seismical Action in Member Design principles of member design.
Book
Seismic Design and Retrofit of Bridges
TL;DR: In this article, the authors focus on designing adequate displacement and ductility capacity into new bridges, with less significance placed on strength, where a strength hierarchy is established in a bridge to ensure that damage is controllable and occurs only where the designer intends.
Journal ArticleDOI
Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review
Charles E. Bakis,Lawrence C. Bank,Vicki L. Brown,Edoardo Cosenza,Julio F. Davalos,John J. Lesko,Atsuhiko Machida,Sami H. Rizkalla,Thanasis Triantafillou +8 more
TL;DR: A concise state-of-the-art survey of fiber-reinforced polymer composites for construction applications in civil engineering is presented in this article, which includes a historical review, the current state of the art, and future challenges.
Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review
Charles E. Bakis,Lawrence C. Bank,Vicki L. Brown,Edoardo Cosenza,Julio F. Davalos,John J. Lesko,Atsuhiko Machida,Sami H. Rizkalla,Thanasis Triantafillou +8 more
TL;DR: A concise state-of-the-art survey of fiber-reinforced polymer composites for construction applications in civil engineering is presented in this article, which includes a historical review, the current state of the art, and future challenges.
Related Papers (5)
Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures (ACI 440.2R-02)
K. Soudki,T. Alkhrdaji +1 more
Externally bonded FRP reinforcement for RC structures
Thanasis Triantafillou,Stijn Matthys,Katrien Audenaert,György L. Balázs,M. Blaschko,Hendrik Blontrock,Christoph Czaderski,Emmanuelle David,Angello Di Tomasso,William Duckett,Dick Hordijk,Michael Leeming,Heinz Meier,Giorgio Monti,Richard Moss,Uwe Neubauer,Roland Niedermeier,Björn Täljsten,G. Zehetmaier,Konrad Zilch +19 more