Showing papers on "Nanoparticle published in 2005"
TL;DR: This review discusses the synthetic chemistry, fluid stabilization and surface modification of superparamagnetic iron oxide nanoparticles, as well as their use for above biomedical applications.
6,207 citations
TL;DR: The results indicate that the bactericidal properties of the nanoparticles are size dependent, since the only nanoparticles that present a direct interaction with the bacteria preferentially have a diameter of approximately 1-10 nm.
Abstract: Nanotechnology is expected to open new avenues to fight and prevent disease using atomic scale tailoring of materials. Among the most promising nanomaterials with antibacterial properties are metallic nanoparticles, which exhibit increased chemical activity due to their large surface to volume ratios and crystallographic surface structure. The study of bactericidal nanomaterials is particularly timely considering the recent increase of new resistant strains of bacteria to the most potent antibiotics. This has promoted research in the well known activity of silver ions and silver-based compounds, including silver nanoparticles. The present work studies the effect of silver nanoparticles in the range of 1-100 nm on Gram-negative bacteria using high angle annular dark field (HAADF) scanning transmission electron microscopy (STEM). Our results indicate that the bactericidal properties of the nanoparticles are size dependent, since the only nanoparticles that present a direct interaction with the bacteria preferentially have a diameter of approximately 1-10 nm.
5,609 citations
TL;DR: This work introduces a version of the dye-sensitized cell in which the traditional nanoparticle film is replaced by a dense array of oriented, crystalline ZnO nanowires, which features a surface area up to one-fifth as large as a nanoparticle cell.
Abstract: Excitonic solar cells1—including organic, hybrid organic–inorganic and dye-sensitized cells (DSCs)—are promising devices for inexpensive, large-scale solar energy conversion. The DSC is currently the most efficient2 and stable3 excitonic photocell. Central to this device is a thick nanoparticle film that provides a large surface area for the adsorption of light-harvesting molecules. However, nanoparticle DSCs rely on trap-limited diffusion for electron transport, a slow mechanism that can limit device efficiency, especially at longer wavelengths. Here we introduce a version of the dye-sensitized cell in which the traditional nanoparticle film is replaced by a dense array of oriented, crystalline ZnO nanowires. The nanowire anode is synthesized by mild aqueous chemistry and features a surface area up to one-fifth as large as a nanoparticle cell. The direct electrical pathways provided by the nanowires ensure the rapid collection of carriers generated throughout the device, and a full Sun efficiency of 1.5% is demonstrated, limited primarily by the surface area of the nanowire array.
5,308 citations
TL;DR: Variations in reaction conditions and crystallographic analysis of gold nanorod have led to insight into the growth mechanism of these materials, and optical applications in sensing and imaging, which take advantage of the visible light absorption and scattering properties of the nanorods are discussed.
Abstract: This feature article highlights work from the authors' laboratories on the synthesis, assembly, reactivity, and optical applications of metallic nanoparticles of nonspherical shape, especially nanorods. The synthesis is a seed-mediated growth procedure, in which metal salts are reduced initially with a strong reducing agent, in water, to produce ∼4 nm seed particles. Subsequent reduction of more metal salt with a weak reducing agent, in the presence of structure-directing additives, leads to the controlled formation of nanorods of specified aspect ratio and can also yield other shapes of nanoparticles (stars, tetrapods, blocks, cubes, etc.). Variations in reaction conditions and crystallographic analysis of gold nanorods have led to insight into the growth mechanism of these materials. Assembly of nanorods can be driven by simple evaporation from solution or by rational design with molecular-scale connectors. Short nanorods appear to be more chemically reactive than long nanorods. Finally, optical applica...
2,905 citations
TL;DR: The data suggest that in addition to the release of toxic Cd(2+) ions from the particles also their surface chemistry, in particular their stability toward aggregation, plays an important role for cytotoxic effects.
Abstract: Cytotoxicity of CdSe and CdSe/ZnS nanoparticles has been investigated for different surface modifications such as coating with mercaptopropionic acid, silanization, and polymer coating. For all cases, quantitative values for the onset of cytotoxic effects in serum-free culture media are given. These values are correlated with microscope images in which the uptake of the particles by the cells has been investigated. Our data suggest that in addition to the release of toxic Cd 2+ ions from the particles also their surface chemistry, in particular their stability toward aggregation, plays an important role for cytotoxic effects. Additional patch clamp experiments investigate effects of the particles on currents through ion channels.
1,581 citations
TL;DR: It is demonstrated that silver nanoparticles undergo a size-dependent interaction with HIV-1, with nanoparticles exclusively in the range of 1–10 nm attached to the virus.
Abstract: The interaction of nanoparticles with biomolecules and microorganisms is an expanding field of research. Within this field, an area that has been largely unexplored is the interaction of metal nanoparticles with viruses. In this work, we demonstrate that silver nanoparticles undergo a size-dependent interaction with HIV-1, with nanoparticles exclusively in the range of 1–10 nm attached to the virus. The regular spatial arrangement of the attached nanoparticles, the center-to-center distance between nanoparticles, and the fact that the exposed sulfur-bearing residues of the glycoprotein knobs would be attractive sites for nanoparticle interaction suggest that silver nanoparticles interact with the HIV-1 virus via preferential binding to the gp120 glycoprotein knobs. Due to this interaction, silver nanoparticles inhibit the virus from binding to host cells, as demonstrated in vitro.
1,559 citations
TL;DR: The applications of these functionalized magnetic nanoparticles with their unique features will further improve medical techniques and enhance medical techniques.
1,394 citations
TL;DR: It is highly feasible for nanoparticles of biodegradable polymers to be applied to promote oral chemotherapy by using Caco-2 cells, showing that surface modification of PLGA nanoparticles with vitamin E TPGS notably improved the cellular uptake.
1,354 citations
TL;DR: Pd-functionalized nanostructures exhibited a dramatic improvement in sensitivity toward oxygen and hydrogen due to the enhanced catalytic dissociation of the molecular adsorbate on the Pd nanoparticle surfaces and the subsequent diffusion of the resultant atomic species to the oxide surface.
Abstract: The sensing ability of individual SnO2 nanowires and nanobelts configured as gas sensors was measured before and after functionalization with Pd catalyst particles. In situ deposition of Pd in the same reaction chamber in which the sensing measurements were carried out ensured that the observed modification in behavior was due to the Pd functionalization rather than the variation in properties from one nanowire to another. Changes in the conductance in the early stages of metal deposition (i.e., before metal percolation) indicated that the Pd nanoparticles on the nanowire surface created Schottky barrier-type junctions resulting in the formation of electron depletion regions within the nanowire, constricting the effective conduction channel and reducing the conductance. Pd-functionalized nanostructures exhibited a dramatic improvement in sensitivity toward oxygen and hydrogen due to the enhanced catalytic dissociation of the molecular adsorbate on the Pd nanoparticle surfaces and the subsequent diffusion ...
1,307 citations
TL;DR: These studies provide important clues on the mechanism of the reactions the authors studied and also can be very useful in the process of designing better catalysts in the future.
Abstract: While the nanocatalysis field has undergone an explosive growth during the past decade, there have been very few studies in the area of shape-dependent catalysis and the effect of the catalytic process on the shape and size of transition metal nanoparticles as well as their recycling potential. Metal nanoparticles of different shapes have different crystallographic facets and have different fraction of surface atoms on their corners and edges, which makes it interesting to study the effect of metal nanoparticle shape on the catalytic activity of various organic and inorganic reactions. Transition metal nanoparticles are attractive to use as catalysts due to their high surface-to-volume ratio compared to bulk catalytic materials, but their surface atoms could be so active that changes in the size and shape of the nanoparticles could occur during the course of their catalytic function, which could also affect their recycling potential. In this Feature Article, we review our work on the effect of the shape of the colloidal nanocatalyst on the catalytic activity as well as the effect of the catalytic process on the shape and size of the colloidal transition metal nanocatalysts and their recycling potential. These studies provide important clues on the mechanism of the reactions we studied and also can be very useful in the process of designing better catalysts in the future.
1,192 citations
TL;DR: In this paper, an engineered enhancement of optical absorption and photocurrent in a semiconductor via the excitation of surface plasmon resonances in spherical Au nanoparticles deposited on the semiconductor surface was reported.
Abstract: Surface plasmon resonances in metallic nanoparticles are of interest for a variety of applications due to the large electromagnetic field enhancement that occurs in the vicinity of the metal surface, and the dependence of the resonance wavelength on the nanoparticle’s size, shape, and local dielectric environment. Here we report an engineered enhancement of optical absorption and photocurrent in a semiconductor via the excitation of surface plasmon resonances in spherical Au nanoparticles deposited on the semiconductor surface. The enhancement in absorption within the semiconductor results in increased photocurrent response in Si pn junction diodes over wavelength ranges that correspond closely to the nanoparticle plasmon resonance wavelengths as determined by measurements of extinction spectra. These observations suggest a variety of approaches for improving the performance of devices such as photodetectors, imaging arrays, and photovoltaics.
TL;DR: The dumbbell is formed through epitaxial growth of iron oxide on the Au seeds, and the growth can be affected by the polarity of the solvent, as the use of diphenyl ether results in flower-like Au-Fe(3)O(4) nanoparticles.
Abstract: Dumbbell-like Au−Fe3O4 nanoparticles are synthesized using decomposition of Fe(CO)5 on the surface of the Au nanoparticles followed by oxidation in 1-octadecene solvent. The size of the particles is tuned from 2 to 8 nm for Au and 4 nm to 20 nm for Fe3O4. The particles show the characteristic surface plasmon absorption of Au and the magnetic properties of Fe3O4 that are affected by the interactions between Au and Fe3O4. The dumbbell is formed through epitaxial growth of iron oxide on the Au seeds, and the growth can be affected by the polarity of the solvent, as the use of diphenyl ether results in flower-like Au−Fe3O4 nanoparticles.
TL;DR: This Minireview systematically examines optical properties of silver nanoparticles as a function of size, and the development of a novel synthetic method for the size-controlled synthesis of chemically clean, highly crystallinesilver nanoparticles of narrow size distribution is compared.
Abstract: This Minireview systematically examines optical properties of silver nanoparticles as a function of size. Extinction, scattering, and absorption cross-sections and distance dependence of the local electromagnetic field, as well as the quadrupolar coupling of 2D assemblies of such particles are experimentally measured for a wide range of particle sizes. Such measurements were possible because of the development of a novel synthetic method for the size-controlled synthesis of chemically clean, highly crystalline silver nanoparticles of narrow size distribution. The method and its unique advantages are compared to other methods for synthesis of metal nanoparticles. Synthesis and properties of nanocomposite materials using these and other nanoparticles are also described. Important highlights in the history of the field of metal nanoparticles as well as an examination of the basic principles of plasmon resonances are included.
TL;DR: These nanoparticles are monodisperse in solution, 20 times brighter, and more photostable than their constituent fluorophore, and are amenable to specific labeling of biological macromolecules for bioimaging experiments.
Abstract: A class of highly fluorescent and photostable core−shell nanoparticles from a modified Stober synthesis in the size range of 20−30 nm is described. These nanoparticles are monodisperse in solution, 20 times brighter, and more photostable than their constituent fluorophore, and are amenable to specific labeling of biological macromolecules for bioimaging experiments. The photophysical characteristics of the encapsulated fluorophores differ from their solution properties. This raises the possibility of tuning nanoparticle structure toward enhanced radiative properties, making them an attractive material platform for a diverse range of applications.
TL;DR: Two widely studied nano-Fe0 preparations are characterized: one synthesized by reduction of goethite with heat and H2 and the other by reductive precipitation with borohydride, which exhibit corrosion potentials that are more negative than nano-sized Fe2O3, Fe3O4, micro-sizedFe0, or a solid Fe0 disk.
Abstract: There are reports that nano-sized zero-valent iron (Fe0) exhibits greater reactivity than micro-sized particles of Fe0, and it has been suggested that the higher reactivity of nano-Fe0 may impart advantages for groundwater remediation or other environmental applications. However, most of these reports are preliminary in that they leave a host of potentially significant (and often challenging) material or process variables either uncontrolled or unresolved. In an effort to better understand the reactivity of nano-Fe0, we have used a variety of complementary techniques to characterize two widely studied nano-Fe0 preparations: one synthesized by reduction of goethite with heat and H2 (FeH2) and the other by reductive precipitation with borohydride (FeBH). FeH2 is a two-phase material consisting of 40 nm α-Fe0 (made up of crystals approximately the size of the particles) and Fe3O4 particles of similar size or larger containing reduced sulfur; whereas FeBH is mostly 20−80 nm metallic Fe particles (aggregates ...
TL;DR: Whether multivalent attachment of small molecules can increase specific binding affinity and reveal new biological properties of nanomaterials is investigated and a parallel synthesis of a library comprising 146 nanoparticles decorated with different synthetic small molecules is described.
Abstract: Nanomaterials with precise biological functions have considerable potential for use in biomedical applications. Here we investigate whether multivalent attachment of small molecules can increase specific binding affinity and reveal new biological properties of such nanomaterials. We describe the parallel synthesis of a library comprising 146 nanoparticles decorated with different synthetic small molecules. Using fluorescent magnetic nanoparticles, we rapidly screened the library against different cell lines and discovered a series of nanoparticles with high specificity for endothelial cells, activated human macrophages or pancreatic cancer cells. Hits from the last-mentioned screen were shown to target pancreatic cancer in vivo. The method and described materials could facilitate development of functional nanomaterials for applications such as differentiating cell lines, detecting distinct cellular states and targeting specific cell types.
TL;DR: The silver nanoparticles synthesized by inert gas condensation and co-condensation techniques were found to exhibit antibacterial effects at low concentrations and the antibacterial properties were related to the total surface area of the nanoparticles.
Abstract: Nanometer sized silver particles were synthesized by inert gas condensation and co-condensation techniques. Both techniques are based on the evaporation of a metal into an inert atmosphere with the subsequent cooling for the nucleation and growth of the nanoparticles. The antibacterial efficiency of the nanoparticles was investigated by introducing the particles into a media containing Escherichia coli. The antibacterial investigations were performed in solution and on petri dishes. The silver nanoparticles were found to exhibit antibacterial effects at low concentrations. The antibacterial properties were related to the total surface area of the nanoparticles. Smaller particles with a larger surface to volume ratio provided a more efficient means for antibacterial activity. The nanoparticles were found to be completely cytotoxic to E. coli for surface concentrations as low as 8 microg of Ag/cm2.
TL;DR: These materials are synthesized by a template approach in which metal ions are extracted into the interior of dendrimers and then subsequently chemically reduced to yield nearly size-monodisperse particles having dimensions of less than 3 nm.
Abstract: In this article we describe the synthesis, characterization, and applications of dendrimer-encapsulated nanoparticles (DENs). These materials are synthesized by a template approach in which metal ions are extracted into the interior of dendrimers and then subsequently chemically reduced to yield nearly size-monodisperse particles having dimensions of less than 3 nm. Monometallic, bimetallic (including core/shell), and semiconductor nanoparticles have been prepared by this route. The dendrimer component of these composites serves not only as a template for preparing the nanoparticle replica but also to stabilize the nanoparticle, makes it possible to tune solubility, and provides a means for immobilization of the nanoparticle on solid supports. These materials have a number of potential applications, but the focus here is on catalysis. Homogeneous catalytic reactions, including hydrogenations, Heck coupling, and Suzuki reactions, in water, organic solvents, biphasic fluorous/organic solvents, and liquid an...
TL;DR: Particle Replication In Nonwetting Templates affords the simple, straightforward encapsulation of a variety of important bioactive agents, including proteins, DNA, and small-molecule therapeutics, which indicates that PRINT can be used to fabricate next-generation particulate drug-delivery agents.
Abstract: A versatile "top-down" method for the fabrication of particles, Particle Replication In Nonwetting Templates (PRINT), is described which affords absolute control over particle size, shape, and composition. This technique is versatile and general enough to fabricate particles with a variety of chemical structures, yet delicate enough to be compatible with sophisticated biological agents. Using PRINT, we have fabricated monodisperse particles of poly(ethylene glycol diacrylate), triacrylate resin, poly(lactic acid), and poly(pyrrole). Monodisperse particle populations, ranging from sub-200 nm nanoparticles to complex micron-scale objects, have been fabricated and harvested. PRINT uses low-surface energy, chemically resistant fluoropolymers as molding materials, which eliminates the formation of a residual interconnecting film between molded objects. Until now, the presence of this film has largely prevented particle fabrication using soft lithography. Importantly, we have demonstrated that PRINT affords the simple, straightforward encapsulation of a variety of important bioactive agents, including proteins, DNA, and small-molecule therapeutics, which indicates that PRINT can be used to fabricate next-generation particulate drug-delivery agents.
TL;DR: This study demonstrates that systematic design and modulation of the surface charge and particle size of chitosan-TPP nanoparticles can be readily achieved with the right control of critical processing parameters, especially the chitOSan to TPP weight ratio.
TL;DR: A nonvolatile plastic digital memory device based on nanofibers of the conjugated polymer polyaniline decorated with gold nanoparticles is reported, combining two exciting research areas--nanoparticles and conducting polymers--to form a novel materials system with unique functionality.
Abstract: A nonvolatile plastic digital memory device based on nanofibers of the conjugated polymer polyaniline decorated with gold nanoparticles is reported. The device has a simple structure consisting of the plastic composite film sandwiched between two electrodes. An external bias is used to program the ON and OFF states of the device that are separated by a 3-orders-of-magnitude difference in conductivity. ON−OFF switching times of less than 25 ns are observed by electrical pulse measurements. The devices possess prolonged retention times of several days after they have been programmed. Write−read−erase cycles are also demonstrated. The switching mechanism is attributed to an electric-field-induced charge transfer from the polyaniline nanofibers to the gold nanoparticles. The active polymer layer is created by growing nanometer size gold particles within 30-nm-diameter polyaniline nanofibers using a redox reaction with chloroauric acid. This device combines two exciting research areasnanoparticles and conducti...
TL;DR: In this paper, the key methods for the preparation of magnetic nanoparticles are described systematically and the experimental data on their properties are analyzed and generalised, as well as the main theoretical views on the magnetism of nanoparticles were considered.
Abstract: The key methods for the preparation of magnetic nanoparticles are described systematically. The experimental data on their properties are analysed and generalised. The main theoretical views on the magnetism of nanoparticles are considered.
TL;DR: A simple and green approach for synthesizing palladized iron (Fe-Pd) nanoparticles by applying a water-soluble starch as a stabilizer is developed, and the starched nanoparticles exhibited markedly greater reactivity when used for dechlorination of TCE or PCBs in water.
Abstract: Dechlorination of TCE and PCBs using bimetallic nanoparticles has received increasing interest in recent years. However, due to the extremely high reactivity, nanoparticles prepared using current methods tend to either react with surrounding media or agglomerate, resulting in the formation of much larger flocs and significant loss in reactivity. To overcome these drawbacks, we developed a simple and green approach for synthesizing palladized iron (Fe−Pd) nanoparticles. We modified the conventional methods by applying a water-soluble starch as a stabilizer. The starched nanoparticles displayed much less ag glomeration but greater dechlorination power than those prepared without a stabilizer. TEM analyses indicated that the starched nanoparticles were present as discrete particles as opposed to dendritic flocs for nonstarched particles. The mean particle size was estimated to be 14.1 nm with a standard deviation of 11.7 nm, which translated to a surface area of ∼55 m2 g-1. While starched nanoparticles remai...
TL;DR: Comparison of the colloid stability of a series of oxide nanoparticles reveals that untreated oxide suspensions rapidly agglomerate in biological fluids and allows the conclusion that the presented transport and uptake kinetics at low concentrations may be extended to other industrially relevant materials.
Abstract: Quantitative studies on the uptake of nanoparticles into biological systems should consider simultaneous agglomera tion, sedimentation, and diffusion at physiologically relevant concentrations to assess the corresponding risks of nanomaterials to human health. In this paper, the transport and uptake of industrially important cerium oxide nanoparticles, into human lung fibroblasts is measured in vitro after exposing thoroughly characterized particle suspensions to a fibroblast cell culture for particles of four separate size fractions and concentrations ranging from 100 ng g-1 to 100 μg g-1 of fluid (100 ppb to 100 ppm). The unexpected findings at such low but physiologically relevant concentrations reveal a strong dependence of the amount of incorporated ceria on particle size, while nanoparticle number density or total particle surface area are of minor importance. These findings can be explained on the basis of a purely physical model. The rapid formation of agglomerates in the liquid is strongly favore...
TL;DR: In this paper, the authors present a systemic review of current research on 1D Nanoparticle (NP) assemblies, including their preparation methods and novel characteristics of NP chains, such as collective properties and directional transfer of photons, electrons, spins, etc.
Abstract: Nanoparticle (NP) assemblies are of considerable interest for both fundamental research and applications, since they provide direct bridges between nanometer-scale objects and the macroscale world. Unlike two-dimensional or three-dimensional NP assemblies, which have been extensively studied and reviewed, reports on one-dimensional (1D) NP assemblies are rather rare, even though these assemblies are likely to play critical roles in the improvement of the efficiencies of various electronic, optoelectronic, magnetic, and other devices based on single NPs or their composites. Additionally, 1D assemblies of NPs, i.e., chains, can significantly help in the understanding of a number of biological processes and fundamental quantum mechanics of nanometer-scale systems. The difficulties are very evident when one wants to realize anisotropic 1D assemblies from presumably isotropic, zero-dimensional NPs. In this context, the authors present a systemic review of current research on 1D NP assemblies. Their preparation methods are classified and novel characteristics of NP chains, such as collective properties and directional transfer of photons, electrons, spins, etc., are elucidated. Current problems underlying the fundamental research and practical applications of 1D NP assemblies are also addressed.
TL;DR: The fluorescence quantum yield of Cy5 molecules attached to gold nanoparticles via ss DNA spacers via ssDNA spacers is measured for Cy5-nanoparticle distances between 2 and 16 nm to show distance dependent quantum efficiency.
Abstract: The fluorescence quantum yield of Cy5 molecules attached to gold nanoparticles via ssDNA spacers is measured for Cy5-nanoparticle distances between 2 and 16 nm. Different numbers of ssDNA per nanoparticle allow to fine-tune the distance. The change of the radiative and nonradiative molecular decay rates with distance is determined using time-resolved photoluminescence spectroscopy. Remarkably, the distance dependent quantum efficiency is almost exclusively governed by the radiative rate.
TL;DR: Directional freezing is used to align the structural elements, either in the form of three-dimensional porous structures or as two-dimensional oriented surface patterns, and can be used to generate a diverse array of complex structures such as polymer–inorganic nanocomposites, aligned gold microwires and microwave networks, porous composite microfibres and biaxially aligned composite networks.
Abstract: Aligned two- and three-dimensional structures by directional freezing of polymers and nanoparticles
TL;DR: A novel kind of magnetic core/mesoporous silica shell nanospheres with a uniform particle diameter of ca.
Abstract: A novel kind of magnetic core/mesoporous silica shell nanospheres with a uniform particle diameter of ca. 270 nm was synthesized. The inner magnetic core endues the whole nanoparticle with magnetic properties, while the outer mesoporous silica shell shows high enough surface area and pore volume. The synthesized material is expected to be applied to targeted drug delivery and multiphase separation. The storage and release of ibuprofen into and from the pore channels of the mesoporous silica shell, as a typical example, are demonstrated.
TL;DR: In this article, a general strategy that involves oxidative aggregation of metal chalcogenide nanoparticle building blocks followed by supercritical solvent removal is described. But this strategy is not suitable for aerogels, as they exhibit high surface areas, can be prepared as monoliths, and demonstrate the characteristic quantum-confined optical properties of their nanoparticle components.
Abstract: Chalcogenide aerogels based entirely on semiconducting II-VI or IV-VI frameworks have been prepared from a general strategy that involves oxidative aggregation of metal chalcogenide nanoparticle building blocks followed by supercritical solvent removal. The resultant materials are mesoporous, exhibit high surface areas, can be prepared as monoliths, and demonstrate the characteristic quantum-confined optical properties of their nanoparticle components. These materials can be synthesized from a variety of building blocks by chemical or photochemical oxidation, and the properties can be further tuned by heat treatment. Aerogel formation represents a powerful yet facile method for metal chalcogenide nanoparticle assembly and the creation of mesoporous semiconductors.
15 Mar 2005
TL;DR: The chitosan-bound Fe(3)O(4) nanoparticles were shown to be quite efficient for the removal of Cu(II) ions at pH>2.5, and the adsorption rate was so fast that the equilibrium was achieved within 1 min due to the absence of internal diffusion resistance.
Abstract: Monodisperse chitosan-bound Fe(3)O(4) nanoparticles were developed as a novel magnetic nano-adsorbent for the removal of heavy metal ions. Chitosan was first carboxymethylated and then covalently bound on the surface of Fe(3)O(4) nanoparticles via carbodiimide activation. Transmission electron microscopy micrographs showed that the chitosan-bound Fe(3)O(4) nanoparticles were monodisperse and had a mean diameter of 13.5 nm. X-ray diffraction patterns indicated that the magnetic nanoparticles were pure Fe(3)O(4) with a spinel structure, and the binding of chitosan did not result in a phase change. The binding of chitosan was also demonstrated by the measurement of zeta potential, and the weight percentage of chitosan bound to Fe(3)O(4) nanoparticles was estimated to be about 4.92 wt%. The chitosan-bound Fe(3)O(4) nanoparticles were shown to be quite efficient for the removal of Cu(II) ions at pH>2. In particular, the adsorption rate was so fast that the equilibrium was achieved within 1 min due to the absence of internal diffusion resistance. The adsorption data obeyed the Langmuir equation with a maximum adsorption capacity of 21.5 mg g(-1) and a Langmuir adsorption equilibrium constant of 0.0165 L mg(-1). The pH and temperature effects revealed that the adsorption capacity increased significantly with increasing pH at pH 2-5, and the adsorption process was exothermic in nature with an enthalpy change of -6.14 kJ mol(-1) at 300-330 K.