3M

About: 3M is a company organization based out in Saint Paul, Minnesota, United States. It is known for research contribution in the topics: Layer (electronics) & Coating. The organization has 7603 authors who have published 7907 publications receiving 254227 citations. The organization is also known as: Minnesota Mining and Manufacturing Company & 3M Company.

Cutting element with wear resistant crown

Abstract: A cutting element adapted to be used in a rotary drill bit is made by positioning in an appropriately shaped die cavity a quantity of a mixture of tungsten carbide and 4 to 11 percent cobalt in the shape of a crown for defining an outer surface for the tip portion of the cutting element using a pressure of less than about 600 pounds per square inch; positioning in the cavity a quantity of a mixture of tungsten carbide and 12 to 17 percent cobalt sufficient to form almost all of a base portion and at least an inner part of the tip portion for the cutting element; pressing the two quantities of the mixtures together and into the die at pressures in the range of about 10 to 15 tons per square inch; and sintering the pressed insert to form the cutting element.

Initiator system and adhesive composition made therewith

Abstract: Systems for initiating the polymerization of acrylic monomers comprising (1) organoborane amine complexes and (2) decomplexers comprising at least one anhydride group. Adhesive compositions prepared from the initiator systems advantageously exhibit low levels of mobile constituents, excellent solvent resistance, and good adhesion to low energy surfaces.

Macromer reinforced pressure sensitive skin adhesive

Abstract: A skin adhesive coated sheet material is provided which is coated with a polymer that exhibits an enhanced level of initial adhesion when applied to skin but resists objectionable adhesion build up over time. The skin adhesives are comprised of a macromer reinforced acrylate copolymer which has a creep compliance value at least about 1.2×10-5 cm2 /dyne.

Double-sided pressure-sensitive adhesive tape and method of making

Abstract: A unified, composite tape structure comprising two outer pressure-sensitive adhesive layers and a backing joined via melt processing. At least one of the backing and two outer adhesive layers is not mutually coextensive. A method of making the tape comprising the use of melt processing is also disclosed.

Repositionable device for delivery of volatile materials

Abstract: A device for delivery of volatile materials comprising a volatile material delivery layer, a support layer and a repositionable adhesive layer. Devices so constructed may be applied to any desired substrate without fear of harming the surface of the substrate.