Showing papers on "Oxidation state published in 2021"

Restructuring highly electron-deficient metal-metal oxides for boosting stability in acidic oxygen evolution reaction.

Abstract: The poor catalyst stability in acidic oxidation evolution reaction (OER) has been a long-time issue. Herein, we introduce electron-deficient metal on semiconducting metal oxides-consisting of Ir (Rh, Au, Ru)-MoO3 embedded by graphitic carbon layers (IMO) using an electrospinning method. We systematically investigate IMO’s structure, electron transfer behaviors, and OER catalytic performance by combining experimental and theoretical studies. Remarkably, IMO with an electron-deficient metal surface (Irx+; x > 4) exhibit a low overpotential of only ~156 mV at 10 mA cm−2 and excellent durability in acidic media due to the high oxidation state of metal on MoO3. Furthermore, the proton dissociation pathway is suggested via surface oxygen serving as proton acceptors. This study suggests high stability with high catalytic performance in these materials by creating electron-deficient surfaces and provides a general, unique strategy for guiding the design of other metal-semiconductor nanocatalysts. The poor catalyst stability for oxygen evolution in acidic media has been a long-time issue. Here, authors demonstrate iridium on MoO3 exhibits a low overpotential for oxygen evolution and excellent durability in acidic media due to the high oxidation state of iridium metal on MoO3.

Strongly reducing magnesium(0) complexes

Abstract: A complex of a metal in its zero oxidation state can be considered a stabilized, but highly reactive, form of a single metal atom. Such complexes are common for the more noble transition metals. Although rare examples are known for electronegative late-main-group p-block metals or semimetals1–6, it is a challenge to isolate early-main-group s-block metals in their zero oxidation state7–11. This is directly related to their very low electronegativity and strong tendency to oxidize. Here we present examples of zero-oxidation-state magnesium (that is, magnesium(0)) complexes that are stabilized by superbulky, monoanionic, β-diketiminate ligands. Whereas the reactivity of an organomagnesium compound is typically defined by the nucleophilicity of its organic groups and the electrophilicity of Mg2+ cations, the Mg0 complexes reported here feature electron-rich Mg centres that are nucleophilic and strongly reducing. The latter property is exemplified by the ability to reduce Na+ to Na0. We also present a complex with a linear Mg3 core that formally could be described as a MgI–Mg0–MgI unit. Such multinuclear mixed-valence Mgn clusters are discussed as fleeting intermediates during the early stages of Grignard reagent formation. Their remarkably strong reducing power implies a rich reactivity and application as specialized reducing agents. Strongly reducing β-diketiminate complexes containing magnesium in its zero oxidation state are reported, among which is a compound with a linear triatomic Mg–Mg–Mg core.

Design Aspects of Doped CeO 2 for Low-Temperature Catalytic CO Oxidation: Transient Kinetics and DFT Approach.

Abstract: CO elimination through oxidation over highly active and cost-effective catalysts is a way forward for many processes of industrial and environmental importance. In this study, doped CeO2 with transition metals (TM = Cu, Co, Mn, Fe, Ni, Zr, and Zn) at a level of 20 at. % was tested for CO oxidation. The oxides were prepared using microwave-assisted sol-gel synthesis to improve catalyst's performance for the reaction of interest. The effect of heteroatoms on the physicochemical properties (structure, morphology, porosity, and reducibility) of the binary oxides M-Ce-O was meticulously investigated and correlated to their CO oxidation activity. It was found that the catalytic activity (per gram basis or TOF, s-1) follows the order Cu-Ce-O > Ce-Co-O > Ni-Ce-O > Mn-Ce-O > Fe-Ce-O > Ce-Zn-O > CeO2. Participation of mobile lattice oxygen species in the CO/O2 reaction does occur, the extent of which is heteroatom-dependent. For that, state-of-the-art transient isotopic 18O-labeled experiments involving 16O/18O exchange followed by step-gas CO/Ar or CO/O2/Ar switches were used to quantify the contribution of lattice oxygen to the reaction. SSITKA-DRIFTS studies probed the formation of carbonates while validating the Mars-van Krevelen (MvK) mechanism. Scanning transmission electron microscopy-high-angle annular dark field imaging coupled with energy-dispersive spectroscopy proved that the elemental composition of dopants in the individual nanoparticle of ceria is less than their composition at a larger scale, allowing the assessment of the doping efficacy. Despite the similar structural features of the catalysts, a clear difference in the Olattice mobility was also found as well as its participation (as expressed with the α descriptor) in the reaction, following the order αCu > αCo> αMn > αZn. Kinetic studies showed that it is rather the pre-exponential (entropic) factor and not the lowering of activation energy that justifies the order of activity of the solids. DFT calculations showed that the adsorption of CO on the Cu-doped CeO2 surface is more favorable (-16.63 eV), followed by Co, Mn, Zn (-14.46, -4.90, and -4.24 eV, respectively), and pure CeO2 (-0.63 eV). Also, copper compensates almost three times more charge (0.37e-) compared to Co and Mn, ca. 0.13e- and 0.10e-, respectively, corroborating for its tendency to be reduced. Surface analysis (X-ray photoelectron spectroscopy), apart from the oxidation state of the elements, revealed a heteroatom-ceria surface interaction (Oa species) of different extents and of different populations of Oa species.

Origin of enhanced water oxidation activity in an iridium single atom anchored on NiFe oxyhydroxide catalyst.

Abstract: The efficiency of the synthesis of renewable fuels and feedstocks from electrical sources is limited, at present, by the sluggish water oxidation reaction. Single-atom catalysts (SACs) with a controllable coordination environment and exceptional atom utilization efficiency open new paradigms toward designing high-performance water oxidation catalysts. Here, using operando X-ray absorption spectroscopy measurements with calculations of spectra and electrochemical activity, we demonstrate that the origin of water oxidation activity of IrNiFe SACs is the presence of highly oxidized Ir single atom (Ir5.3+) in the NiFe oxyhydroxide under operating conditions. We show that the optimal water oxidation catalyst could be achieved by systematically increasing the oxidation state and modulating the coordination environment of the Ir active sites anchored atop the NiFe oxyhydroxide layers. Based on the proposed mechanism, we have successfully anchored Ir single-atom sites on NiFe oxyhydroxides (Ir0.1/Ni9Fe SAC) via a unique in situ cryogenic-photochemical reduction method that delivers an overpotential of 183 mV at 10 mA ⋅ cm- 2 and retains its performance following 100 h of operation in 1 M KOH electrolyte, outperforming the reported catalysts and the commercial IrO2 catalysts. These findings open the avenue toward an atomic-level understanding of the oxygen evolution of catalytic centers under in operando conditions.

Surface electron-hole rich species active in the electrocatalytic water oxidation

Abstract: Iridium and ruthenium and their oxides/hydroxides are the best candidates for the oxygen evolution reaction under harsh acidic conditions owing to the low overpotentials observed for Ru- and Ir-based anodes and the high corrosion resistance of Ir-oxides. Herein, by means of cutting edge operando surface and bulk sensitive X-ray spectroscopy techniques, specifically designed electrode nanofabrication and ab initio DFT calculations, we were able to reveal the electronic structure of the active IrOx centers (i.e., oxidation state) during electrocatalytic oxidation of water in the surface and bulk of high-performance Ir-based catalysts. We found the oxygen evolution reaction is controlled by the formation of empty Ir 5d states in the surface ascribed to the formation of formally IrV species leading to the appearance of electron-deficient oxygen species bound to single iridium atoms (μ1-O and μ1-OH) that are responsible for water activation and oxidation. Oxygen bound to three iridium centers (μ3-O) remains the dominant species in the bulk but do not participate directly in the electrocatalytic reaction, suggesting bulk oxidation is limited. In addition a high coverage of a μ1-OO (peroxo) species during the OER is excluded. Moreover, we provide the first photoelectron spectroscopic evidence in bulk electrolyte that the higher surface-to-bulk ratio in thinner electrodes enhances the material usage involving the precipitation of a significant part of the electrode surface and near-surface active species.

Fe‑O Clusters Anchored on Nodes of Metal–Organic Frameworks for Direct Methane Oxidation

Abstract: Direct methane oxidation into value-added organic oxygenates with high productivity under mild condition remains a great challenge. We show Fe-O clusters on nodes of metal–organic frameworks (MOFs) with tunable electronic state for direct methane oxidation into C1 organic oxygenates at 50 °C. The Fe-O clusters are grafted onto inorganic Zr nodes of UiO-66, while the organic terephthalic acid (H BDC) ligands of UiO-66 are partially substituted with monocarboxylic modulators of acetic acid (AA) or trifluoroacetic acid (TFA). Experiments and theoretical calculation disclose that the TFA group coordinated with Zr node of UiO-66 enhances the oxidation state of adjacent Fe-O cluster due to its electron-withdrawing ability, promotes the activation of C−H bond of methane, and increases its selective conversion, thus leading to the extraordinarily high C1 oxygenate yield of 4799 μmol g h with 97.9 % selectivity, circa 8 times higher than those modulated with AA. 6 2 6 cat −1 −1

The origin of the high electrochemical activity of pseudo-amorphous iridium oxides

Abstract: Combining high activity and stability, iridium oxide remains the gold standard material for the oxygen evolution reaction in acidic medium for green hydrogen production. The reasons for the higher electroactivity of amorphous iridium oxides compared to their crystalline counterpart is still the matter of an intense debate in the literature and, a comprehensive understanding is needed to optimize its use and allow for the development of water electrolysis. By producing iridium-based mixed oxides using aerosol, we are able to decouple the electronic processes from the structural transformation, i.e. Ir oxidation from IrO2 crystallization, occurring upon calcination. Full characterization using in situ and ex situ X-ray absorption spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction and transmission electron microscopy allows to unambiguously attribute their high electrochemical activity to structural features and rules out the iridium oxidation state as a critical parameter. This study indicates that short-range ordering, corresponding to sub-2nm crystal size for our samples, drives the activity independently of the initial oxidation state and composition of the calcined iridium oxides.

Surface Reconstruction of Cobalt Species on Amorphous Cobalt Silicate-Coated Fluorine-Doped Hematite for Efficient Photoelectrochemical Water Oxidation.

Abstract: The slow kinetics of photoelectrochemical (PEC) water oxidation reaction is the bottleneck of PEC water splitting. Here, we report a comprehensive method to improve the PEC water oxidation performance of a hematite (α-Fe2O3) photoanode, that is, fluorine doping and an ultrathin amorphous cobalt silicate (Co-Sil) oxygen evolution reaction (OER) cocatalyst by photo-assisted electrophoretic deposition (PEPD). Detailed investigations reveal that fluorine doping can reduce the interfacial transfer resistance of charge and increase the carrier density to improve the conductivity of hematite. Also, simultaneously, the Co-Sil is used as an excellent OER cocatalyst to accelerate OER kinetics. Specifically, surface reconstruction of cobalt species occurred, and its average oxidation state increased significantly, which was more conducive to water oxidation. In addition, the presence of silicate groups could reduce the OOH* adsorption free energy. The synergistic effect of these efforts significantly reduced the onset potential and overpotential and enhanced the charge separation of the α-Fe2O3 photoanode, resulting in an excellent photocurrent density around 2.61 mA cm-2 at 1.23 V vs RHE (4.75 times higher than the primitive α-Fe2O3). This work provides a feasible strategy for the construction and development of a potential hematite photoanode.

Covalency does not suppress O2 formation in 4d and 5d Li-rich O-redox cathodes.

Abstract: Layered Li-rich transition metal oxides undergo O-redox, involving the oxidation of the O2- ions charge compensated by extraction of Li+ ions. Recent results have shown that for 3d transition metal oxides the oxidized O2- forms molecular O2 trapped in the bulk particles. Other forms of oxidised O2- such as O22- or (O-O)n- with long bonds have been proposed, based especially on work on 4 and 5d transition metal oxides, where TM-O bonding is more covalent. Here, we show, using high resolution RIXS that molecular O2 is formed in the bulk particles on O2‒ oxidation in the archetypal Li-rich ruthenates and iridate compounds, Li2RuO3, Li2Ru0.5Sn0.5O3 and Li2Ir0.5Sn0.5O3. The results indicate that O-redox occurs across 3, 4, and 5d transition metal oxides, forming O2, i.e. the greater covalency of the 4d and 5d compounds still favours O2. RIXS and XAS data for Li2IrO3 are consistent with a charge compensation mechanism associated primarily with Ir redox up to and beyond the 5+ oxidation state, with no evidence of O-O dimerization.

How oxidation state and lattice distortion influence the oxygen evolution activity in acid of iridium double perovskites

Abstract: In view of iridium's scarceness and high cost, Ir-containing catalysts for water electrolyzers should have low loadings and maximal utilization. Here, we studied low-Ir-content, highly active, double perovskites (Sr2MIrO6, M = Ni, Co, Sc and Fe) for the oxygen evolution reaction (OER) in acid combining electrochemical experiments, DFT, and advanced characterization techniques. The initial OER performance depends on Ir's oxidation state and the geometric features of IrO6 frameworks, which are tuned by the choice of M. Higher oxidation states, particularly Ir6+, enhance the OER activity: Sr2NiIrO6 and Sr2CoIrO6 display potentials of ∼1.53 V at 10 mA cm−2, comparable to the best Ir-based catalysts in the literature. However, because of their less symmetric structures, perovskites with Ir6+ are less stable, prone to surface reconstruction and their cations leach under OER conditions. These results show that improved iridium-based OER electrocatalysts in acid can be designed by balancing their activity and stability.

The effects of Fe-doping on MnO2: phase transitions, defect structures and its influence on electrical properties

Abstract: The composition of Mn1−xFexO2 (x = 0–0.15) was synthesized by a hydrothermal method at 140 °C for 5 hours of reaction time. Investigations were carried out including XRD, FTIR, Raman spectroscopy, FESEM, and TEM for crystallographic phase analysis. Furthermore, XPS and XAS were used to analyze the oxidation states of Mn and dopant Fe in the octahedron sites. For electrical characterizations, an impedance analyzer was used to explore the conductivity and dielectric properties. It was discovered that the undoped MnO2 possessed an α-MnO2 structure performing (2 × 2) tunnel permitting K+ insertion and had a nanorod morphology. The Fe ion that was doped into MnO2 caused a phase transformation from α-MnO2 to Ramsdellite R-MnO2 after x = 0.15 was reached and the tunnel dimension changed to (2 × 1). Furthermore, this caused increased micro-strain and oxygen vacancies. An oxidation state analysis of Mn and substituted Fe in the octahedron sites found mixed 3+ and 4+ states. Electrical characterization revealed that the conductivity of Fe-doped MnO2 is potentially electron influenced by the oxidation state of the cations in the octahedron sites, the micro-strain, the dislocation density, and the movement of K+ ions in the tunnel.

Macromolecular Characterization of Compound Selectivity for Oxidation and Oxidative Alterations of Dissolved Organic Matter by Manganese Oxide.

Abstract: Manganese (Mn) oxides can oxidize dissolved organic matter (DOM) and alter its chemical properties and microbial degradability, but the compound selectivity for oxidation and oxidative alterations remain to be determined. We applied ultrahigh mass spectrometry to catalog the macromolecular composition of Suwannee River fulvic acid (SRFA) before and after oxidation by a Mn oxide (δ-MnO2) at pH 4 or 6. Polycyclic aromatic hydrocarbons, polyphenols, and carbohydrates were more reactive in reducing δ-MnO2 than highly unsaturated and phenolic (HuPh) compounds and aliphatics, but highly abundant HuPh contributed the most (∼50%) to the overall reduction of δ-MnO2. On average, oxidized species had higher molecular weights, aromaticity, carbon unsaturation degree, nominal oxidation state of carbon, and oxygen and nitrogen contents but were lower in hydrogen content compared to unoxidized species. The oxidation decreased these molecular indices and oxygen and nitrogen contents but increased the hydrogen content, with stronger changes at the lower pH. This DOM oxidation on polar mineral surfaces was more selective but shared similar selectivity rules to adsorption. The abiotic oxidation resembles microbial oxidative degradation of organic matter, and Mn oxide-oxidizable carbon may be a useful index for detection and identification of labile organic carbon.

Selective CO2 Photoreduction with Cu-Doped TiO2 Photocatalyst: Delineating the Crucial Role of Cu-Oxidation State and Oxygen Vacancies

Abstract: Cu-doped TiO2 photocatalysts [Cu-(1 to 10) atom %] synthesized by the sol–gel method and thoroughly characterized using several techniques were evaluated for photocatalytic reduction of CO2 under a...

Chemical Evolution of Pt-Zn Nanoalloys Dressed in Oleylamine.

Abstract: We report on the shape, composition (from Pt95Zn5 to Pt77Zn23), and surface chemistry of Pt-Zn nanoparticles obtained by reduction of precursors M2+(acac)2- (M2+: Pt2+ and Zn2+) in oleylamine, which serves as both solvent and ligand. We show first that the addition of phenyl ether or benzyl ether determines the composition and shape of the nanoparticles, which point to an adsorbate-controlled synthesis. The organic (ligand)/inorganic (nanoparticles) interface is characterized on the structural and chemical level. We observe that the particles, after washing with ethanol, are coated with oleylamine and the oxidation products of the latter, namely, an aldimine and a nitrile. After exposure to air, the particles oxidize, covering themselves with a few monolayer thick ZnO film, which is certainly discontinuous when the particles are low in zinc. Pt-Zn particles are unstable and prone to losing Zn. We have strong indications that the driving force is the preferential oxidation of the less noble metal. Finally, we show that adsorption of CO on the surface of nanoparticles modifies the oxidation state of amine ligands and attribute it to the displacement of hydrogen adsorbed on Pt. All the structural and chemical information provided by the combination of electron microscopy and X-ray photoelectron spectroscopy allows us to give a fairly accurate picture of the surface of nanoparticles and to better understand why Pt-Zn alloys are efficient in certain electrocatalytic reactions such as the oxidation of methanol.

Cationic–anionic redox couple gradient to immunize against irreversible processes of Li-rich layered oxides

Abstract: The ability to extract/insert more than one Li per formula unit has made Li-rich layered oxides (LLO) one of the most promising cathode materials. However, irreversible transformations triggered by over-delithiation such as phase transitions, oxygen release and Jahn–Teller effects of Mn3+ have limited its practical application. In this work, the irreversible processes during repetitive de/lithiation were found to be diminished by establishing a gradient cationic redox couple of Mn3+/Mn4+ in Li1.2Ni0.2Mn0.6O2. As revealed by STEM, XPS and XAS measurements, the partial substitution of O2− by F− ions promoted nearby Li/transition metal mixing and reduced the valence state of Mn on the surface. Such a configuration shifted the surface redox center towards cationic redox couple (Mn3+/Mn4+), reducing the irreversible oxygen release as well as the ensuing structure and oxidation state changes. As a result of the modification, the product delivered a discharge capacity of 203.4 mA h g−1 after 80 cycles at 0.2C and achieved capacity retention of 89.6% after 100 cycles at 0.5C. The suppressed irreversible processes during repetitive cycling were investigated through ex situ X-ray absorption energy near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectroscopy and DFT calculations, which confirmed the well-preserved oxidation states and atomic configurations in modified Li1.2Ni0.2Mn0.6O2. Overall, this research provided a new avenue to control the irreversible processes in LLO without changing the anion redox behavior of lattice O2− in the bulk area by accommodating the cationic redox couple on the surface.

Heterometallic Clusters with Multiple Rare Earth Metal–Transition Metal Bonding

Abstract: Although a series of complexes with rare earth (RE) metal-metal bonds have been reported, complexes which have multiple RE-Rh bonds are unknown. Here we present the identification of the first example of a molecule containing multiple RE-Rh bonds. The complex with multiple Ce-Rh bonds was synthesized by the reduction of a d-f heterometallic molecular cluster Ce{N[(CH2CH2NPiPr2)RhCl(COD)]3} with excess potassium-graphite. The oxidation state of Ce in 3a appears to be a mixture of Ce(III) and Ce(IV), which was confirmed by X-ray photoelectron spectroscopy, magnetism, and theoretical investigations (DFT and CASSCF). For comparison, the analogous species with multiple La(III)-Rh and Nd(III)-Rh bonds were also constructed. This study provides a possible route for the construction of complexes with multiple RE metal-metal bonds and an investigation of their potential properties and applications.

Selective Control over the Morphology and the Oxidation State of Iron Oxide Nanoparticles

Abstract: Iron oxide nanoparticles (NPs) have been extensively used for both health and technological applications. The control over their morphology, crystal microstructure, and oxidation state is of great importance to optimize their final use. However, while mature in understanding, it is still far from complete. Here we report on the effect of the amount of 1,2-hexadecanediol and/or 1-octadecene in the reaction mixture on the thermal decomposition of iron(III) acetylacetonate in oleic acid for two series of iron oxide NPs with sizes ranging from 6 to 48 nm. We show that a low amount of either compound leads to both large, mixed-phase NPs composed of magnetite (Fe3O4) and wustite (FeO) and high reaction yields. In contrast, a higher amount of either 1,2-hexadecanediol or 1-octadecene gives rise to smaller, single-phase NPs with moderate reaction yields. By infrared spectroscopy, we have elucidated the role of 1,2-hexadecanediol, which mediates the particle nucleation and growth. Finally, we have correlated the magnetic response and the structural features of the NPs for the two series of samples.

A modeling and experimental study on hydrothermal aging deactivation of NO oxidation activity on Pt-Pd catalyst

Abstract: A state-of-the-art Pt-Pd catalyst was hydrothermally treated at different conditions to investigate hydrothermal stability of NO oxidation. NO oxidation reactor data was collected on catalysts that have been hydrothermally treated at temperatures ranging from 550 °C until 1100 °C. NO oxidation activity was observed to decrease with increase in aging duration at all the aging temperatures. A global kinetic model of NO oxidation was used to estimate the change in NO oxidation rate when subjected to different hydro-thermal aging conditions. Model estimated normalized rates at multiple hydro-thermal aging conditions were used to develop a hydro-thermal aging model of NO oxidation. A deactivation Model with Residual Activity (DMRA) was developed to capture the impact of hydrothermal aging temperature and duration on NO oxidation activity. A global kinetic model that accounts for change in PGM oxidation state during NO oxidation has also been presented.

Operando tracking of oxidation-state changes by coupling electrochemistry with time-resolved X-ray absorption spectroscopy demonstrated for water oxidation by a cobalt-based catalyst film

Abstract: Transition metal oxides are promising electrocatalysts for water oxidation, i.e., the oxygen evolution reaction (OER), which is critical in electrochemical production of non-fossil fuels. The involvement of oxidation state changes of the metal in OER electrocatalysis is increasingly recognized in the literature. Tracing these oxidation states under operation conditions could provide relevant information for performance optimization and development of durable catalysts, but further methodical developments are needed. Here, we propose a strategy to use single-energy X-ray absorption spectroscopy for monitoring metal oxidation-state changes during OER operation with millisecond time resolution. The procedure to obtain time-resolved oxidation state values, using two calibration curves, is explained in detail. We demonstrate the significance of this approach as well as possible sources of data misinterpretation. We conclude that the combination of X-ray absorption spectroscopy with electrochemical techniques allows us to investigate the kinetics of redox transitions and to distinguish the catalytic current from the redox current. Tracking of the oxidation state changes of Co ions in electrodeposited oxide films during cyclic voltammetry in neutral pH electrolyte serves as a proof of principle.

Monovalent lanthanide(I) in borozene complexes.

Abstract: Lanthanide (Ln) elements are generally found in the oxidation state +II or +III, and a few examples of +IV and +V compounds have also been reported. In contrast, monovalent Ln(+I) complexes remain scarce. Here we combine photoelectron spectroscopy and theoretical calculations to study Ln-doped octa-boron clusters (LnB8−, Ln = La, Pr, Tb, Tm, Yb) with the rare +I oxidation state. The global minimum of the LnB8− species changes from Cs to C7v symmetry accompanied by an oxidation-state change from +III to +I from the early to late lanthanides. All the C7v-LnB8− clusters can be viewed as a monovalent Ln(I) coordinated by a η8-B82− doubly aromatic ligand. The B73−, B82−, and B9− series of aromatic boron clusters are analogous to the classical aromatic hydrocarbon molecules, C5H5−, C6H6, and C7H7+, respectively, with similar trends of size and charge state and they are named collectively as “borozenes”. Lanthanides with variable oxidation states and magnetic properties may be formed with different borozenes. The most common oxidation state for lanthanides is +3. Here the authors use photoelectron spectroscopy and theoretical calculations to study half-sandwich complexes where a lanthanide center in the oxidation state +1 is bound to an aromatic wheel-like B82- ligand.