Showing papers on "Photovoltaic system published in 2017"

One-Year stable perovskite solar cells by 2D/3D interface engineering

Abstract: Despite the impressive photovoltaic performances with power conversion efficiency beyond 22%, perovskite solar cells are poorly stable under operation, failing by far the market requirements. Various technological approaches have been proposed to overcome the instability problem, which, while delivering appreciable incremental improvements, are still far from a market-proof solution. Here we show one-year stable perovskite devices by engineering an ultra-stable 2D/3D (HOOC(CH2)4NH3)2PbI4/CH3NH3PbI3 perovskite junction. The 2D/3D forms an exceptional gradually-organized multi-dimensional interface that yields up to 12.9% efficiency in a carbon-based architecture, and 14.6% in standard mesoporous solar cells. To demonstrate the up-scale potential of our technology, we fabricate 10 × 10 cm2 solar modules by a fully printable industrial-scale process, delivering 11.2% efficiency stable for >10,000 h with zero loss in performances measured under controlled standard conditions. This innovative stable and low-cost architecture will enable the timely commercialization of perovskite solar cells. Up-scaling represents a key challenge for photovoltaics based on metal halide perovskites. Using a composite of 2D and 3D perovskites in combination with a printable carbon black/graphite counter electrode; Granciniet al., report 11.2% efficient modules stable over 10,000 hours.

The rapid evolution of highly efficient perovskite solar cells

Abstract: Perovskite solar cells (PSCs) have attracted much attention because of their rapid rise to 22% efficiencies. Here, we review the rapid evolution of PSCs as they enter a new phase that could revolutionize the photovoltaic industry. In particular, we describe the properties that make perovskites so remarkable, and the current understanding of the PSC device physics, including the operation of state-of-the-art solar cells with efficiencies above 20%. The extraordinary progress of long-term stability is discussed and we provide an outlook on what the future of PSCs might soon bring the photovoltaic community. Some challenges remain in terms of reducing non-radiative recombination and increasing conductivity of the different device layers, and these will be discussed in depth in this review.

Reducing the efficiency–stability–cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells

Abstract: Technological deployment of organic photovoltaic modules requires improvements in device light-conversion efficiency and stability while keeping material costs low. Here we demonstrate highly efficient and stable solar cells using a ternary approach, wherein two non-fullerene acceptors are combined with both a scalable and affordable donor polymer, poly(3-hexylthiophene) (P3HT), and a high-efficiency, low-bandgap polymer in a single-layer bulk-heterojunction device. The addition of a strongly absorbing small molecule acceptor into a P3HT-based non-fullerene blend increases the device efficiency up to 7.7 ± 0.1% without any solvent additives. The improvement is assigned to changes in microstructure that reduce charge recombination and increase the photovoltage, and to improved light harvesting across the visible region. The stability of P3HT-based devices in ambient conditions is also significantly improved relative to polymer:fullerene devices. Combined with a low-bandgap donor polymer (PBDTTT-EFT, also known as PCE10), the two mixed acceptors also lead to solar cells with 11.0 ± 0.4% efficiency and a high open-circuit voltage of 1.03 ± 0.01 V. Ternary organic blends using two non-fullerene acceptors are shown to improve the efficiency and stability of low-cost solar cells based on P3HT and of high-performance photovoltaic devices based on low-bandgap donor polymers.

Achieving a 100% Renewable Grid: Operating Electric Power Systems with Extremely High Levels of Variable Renewable Energy

Abstract: What does it mean to achieve a 100% renewable grid? Several countries already meet or come close to achieving this goal. Iceland, for example, supplies 100% of its electricity needs with either geothermal or hydropower. Other countries that have electric grids with high fractions of renewables based on hydropower include Norway (97%), Costa Rica (93%), Brazil (76%), and Canada (62%). Hydropower plants have been used for decades to create a relatively inexpensive, renewable form of energy, but these systems are limited by natural rainfall and geographic topology. Around the world, most good sites for large hydropower resources have already been developed. So how do other areas achieve 100% renewable grids? Variable renewable energy (VRE), such as wind and solar photovoltaic (PV) systems, will be a major contributor, and with the reduction in costs for these technologies during the last five years, large-scale deployments are happening around the world.

Enhanced mobility CsPbI3 quantum dot arrays for record-efficiency, high-voltage photovoltaic cells

Abstract: We developed lead halide perovskite quantum dot (QD) films with tuned surface chemistry based on A-site cation halide salt (AX) treatments. QD perovskites offer colloidal synthesis and processing using industrially friendly solvents, which decouples grain growth from film deposition, and at present produce larger open-circuit voltages (VOC’s) than thin-film perovskites. CsPbI3 QDs, with a tunable bandgap between 1.75 and 2.13 eV, are an ideal top cell candidate for all-perovskite multijunction solar cells because of their demonstrated small VOC deficit. We show that charge carrier mobility within perovskite QD films is dictated by the chemical conditions at the QD-QD junctions. The AX treatments provide a method for tuning the coupling between perovskite QDs, which is exploited for improved charge transport for fabricating high-quality QD films and devices. The AX treatments presented here double the film mobility, enabling increased photocurrent, and lead to a record certified QD solar cell efficiency of 13.43%.

A review of thin film solar cell technologies and challenges

Abstract: Thin film solar cells are favorable because of their minimum material usage and rising efficiencies. The three major thin film solar cell technologies include amorphous silicon (α-Si), copper indium gallium selenide (CIGS), and cadmium telluride (CdTe). In this paper, the evolution of each technology is discussed in both laboratory and commercial settings, and market share and reliability are equally explored. The module efficiencies of CIGS and CdTe technologies almost rival that of crystalline solar cells, which currently possess greater than 55% of the market share. α-Si is plagued with low efficiency and light-induced degradation, so it is almost extinct in terrestrial applications. CIGS and CdTe hold the greatest promise for the future of thin film. Longevity, reliability, consumer confidence and greater investments must be established before thin film solar cells are explored on building integrated photovoltaic systems.

Inertia response and frequency control techniques for renewable energy sources: A review

Abstract: Preservation of the environment has become the main motivation to integrate more renewable energy sources (RESs) in electrical networks. However, several technical issues are prevalent at high level RES penetration. The most important technical issue is the difficulty in achieving the frequency stability of these new systems, as they contain less generation units that provide reserve power. Moreover, new power systems have small inertia constant due to the decoupling of the RESs from the AC grid using power converters. Therefore, the RESs in normal operation cannot participate with other conventional generation sources in frequency regulation. This paper reviews several inertia and frequency control techniques proposed for variable speed wind turbines and solar PV generators. Generally, the inertia and frequency regulation techniques were divided into two main groups. The first group includes the deloading technique, which allow the RESs to keep a certain amount of reserve power, while the second group includes inertia emulation, fast power reserve, and droop techniques, which is used to release the RESs reserve power at under frequency events.

Counter electrodes in dye-sensitized solar cells

Abstract: Dye-sensitized solar cells (DSSCs) are regarded as prospective solar cells for the next generation of photovoltaic technologies and have become research hotspots in the PV field. The counter electrode, as a crucial component of DSSCs, collects electrons from the external circuit and catalyzes the redox reduction in the electrolyte, which has a significant influence on the photovoltaic performance, long-term stability and cost of the devices. Solar cells, dye-sensitized solar cells, as well as the structure, principle, preparation and characterization of counter electrodes are mentioned in the introduction section. The next six sections discuss the counter electrodes based on transparency and flexibility, metals and alloys, carbon materials, conductive polymers, transition metal compounds, and hybrids, respectively. The special features and performance, advantages and disadvantages, preparation, characterization, mechanisms, important events and development histories of various counter electrodes are presented. In the eighth section, the development of counter electrodes is summarized with an outlook. This article panoramically reviews the counter electrodes in DSSCs, which is of great significance for enhancing the development levels of DSSCs and other photoelectrochemical devices.

3D-Printed, All-in-One Evaporator for High-Efficiency Solar Steam Generation under 1 Sun Illumination.

Abstract: Using solar energy to generate steam is a clean and sustainable approach to addressing the issue of water shortage. The current challenge for solar steam generation is to develop easy-to-manufacture and scalable methods which can convert solar irradiation into exploitable thermal energy with high efficiency. Although various material and structure designs have been reported, high efficiency in solar steam generation usually can be achieved only at concentrated solar illumination. For the first time, 3D printing to construct an all-in-one evaporator with a concave structure for high-efficiency solar steam generation under 1 sun illumination is used. The solar-steam-generation device has a high porosity (97.3%) and efficient broadband solar absorption (>97%). The 3D-printed porous evaporator with intrinsic low thermal conductivity enables heat localization and effectively alleviates thermal dissipation to the bulk water. As a result, the 3D-printed evaporator has a high solar steam efficiency of 85.6% under 1 sun illumination (1 kW m-2 ), which is among the best compared with other reported evaporators. The all-in-one structure design using the advanced 3D printing fabrication technique offers a new approach to solar energy harvesting for high-efficiency steam generation.

Photovoltaic solar energy: Conceptual framework

Abstract: The purpose of this article is to understand the state of art of photovoltaic solar energy through a systematic literature research, in which the following themes are approached: ways of obtaining the energy, its advantages and disadvantages, applications, current market, costs and technologies according to what has been approached in the scientific researches published until 2016. For this research, we performed a qualitative and quantitative approach with a non-probabilistic sample size, obtaining 142 articles published since 1996–2016 with a slitting cut. The analysis result of this research shows that studies about photovoltaic energy are rising and may perform an important role in reaching a high-energy demand around the world. To increase the participation of photovoltaic energy in the renewable energy market requires, first, to raise awareness regarding its benefits; to increase the research and development of new technologies; to implement public policies a programs that will encourage photovoltaic energy generation. Although crystal silicon solar cells were predominant, other types of cells have been developed, which can compete, both in terms of cost reduction of production, or in terms of greater efficiency. The main applications are dominated by telecommunications, water pumping, public lighting, BIPV, agriculture, water heating, grain drying, water desalination, space vehicles and satellites. The studies found on photovoltaic solar energy are all technical, thus creating the need for future research related to the economic viability, chain supply coordination, analysis of barriers and incentives to photovoltaic solar energy and deeper studies about the factors that influence the position of such technologies in the market.

Raising the one-sun conversion efficiency of III-V/Si solar cells to 32.8% for two junctions and 35.9% for three junctions

Abstract: To improve the efficiency of photovoltaic devices while keeping the same spatial footprint, solar cells can be stacked on top of each other. Here, Essig et al. fabricate very efficient dual-junction and triple-junction solar cells by placing one or two III–V solar cells on top of a silicon solar cell.

CsPb0.9Sn0.1IBr2 Based All-Inorganic Perovskite Solar Cells with Exceptional Efficiency and Stability

Abstract: The emergence of perovskite solar cells (PSCs) has generated enormous interest in the photovoltaic research community. Recently, cesium metal halides (CsMX3, M = Pb or Sn; X = I, Br, Cl or mixed halides) as a class of inorganic perovskites showed great promise for PSCs and other optoelectronic devices. However, CsMX3-based PSCs usually exhibit lower power conversion efficiencies (PCEs) than organic–inorganic hybrid PSCs, due to the unfavorable band gaps. Herein, a novel mixed-Pb/Sn mixed-halide inorganic perovskite, CsPb0.9Sn0.1IBr2, with a suitable band gap of 1.79 eV and an appropriate level of valence band maximum, was prepared in ambient atmosphere without a glovebox. After thoroughly eliminating labile organic components and noble metals, the all-inorganic PSCs based on CsPb0.9Sn0.1IBr2 and carbon counter electrodes exhibit a high open-circuit voltage of 1.26 V and a remarkable PCE up to 11.33%, which is record-breaking among the existing CsMX3-based PSCs. Moreover, the all-inorganic PSCs show good l...

Stable 6%-efficient Sb 2 Se 3 solar cells with a ZnO buffer layer

Abstract: Sb2Se3, a binary compound containing non-toxic and Earth-abundant constituents, is a promising absorber material for low-cost, high-efficiency photovoltaics. Current Sb2Se3 thin-film solar cells use toxic CdS as the buffer layer and suffer from unsatisfactory stability. Here we selected ZnO as the buffer layer and constructed superstrate Sb2Se3 solar cells with a certified power conversion efficiency of 5.93%. Randomly oriented ZnO produced by spray pyrolysis induced the growth of Sb2Se3 with preferred [221] orientation, and hence resulted in devices with fewer interfacial defects and better efficiency. Moreover, our unencapsulated device survived the stringent damp-heat (85 ∘C, 85% humidity, 1,100 h), light-soaking (50 ∘C, 1.3 sun, 1,100 h), thermal cycling, and ultraviolet preconditioning tests. The combined features of stability, Earth-abundant constituent and potentially low-cost manufacturing highlight the great potential of Sb2Se3 solar cell as a possible non-toxic alternative to CdTe photovoltaics. Thin-film photovoltaic devices are often based on toxic or rare materials. Here, Wang et al. grow oriented Sb2Se3 thin film on a ZnO buffer layer, and fabricate solar cells with a certified 5.9% conversion efficiency and which pass harsh stability tests under humidity, heat and illumination.

A novel quadruple-cation absorber for universal hysteresis elimination for high efficiency and stable perovskite solar cells

Abstract: Organic–inorganic metal halide perovskite solar cells (PSCs) have made a striking breakthrough with a power conversion efficiency (PCE) over 22%. However, before moving to commercialization, the hysteresis of PSCs, characterized as an inconsistent photovoltaic conversion property at varied electric fields, should be eliminated for stable performance. Herein, we present a novel quadruple-cation perovskite absorber, KxCs0.05(FA0.85MA0.15)0.95Pb(I0.85Br0.15)3 (labeled as KCsFAMA), with which the hysteresis in PSCs can be fully eliminated irrespective of the electron transportation layers. The incorporation of potassium intensively promotes the crystallization of the perovskite film with a grain size up to ∼1 μm, doubled compared to the K free counterparts. Further characterization revealed that a lower interface defect density, longer carrier lifetime and fast charge transportation have all made contributions to the hysteresis-free, stable and high PCE (20.56%) of the KCsFAMA devices. Moreover, we present a 6 × 6 cm2 sub-module with the KCsFAMA composition achieving a high efficiency of 15.76% without hysteresis. This result suggests that the quadruple-cation perovskite is a highly attractive candidate for future developments of efficient and stable PSC modules.

Large guanidinium cation mixed with methylammonium in lead iodide perovskites for 19% efficient solar cells

Abstract: Organic–inorganic lead halide perovskites have shown photovoltaic performances above 20% in a range of solar cell architectures while offering simple and low-cost processability. Despite the multiple ionic compositions that have been reported so far, the presence of organic constituents is an essential element in all of the high-efficiency formulations, with the methylammonium and formamidinium cations being the sole efficient options available to date. In this study, we demonstrate improved material stability after the incorporation of a large organic cation, guanidinium, into the MAPbI3 crystal structure, which delivers average power conversion efficiencies over 19%, and stabilized performance for 1,000 h under continuous light illumination, a fundamental step within the perovskite field.

General review and classification of different MPPT Techniques

Abstract: In this paper, the concept of power tracking for PV systems is highlighted and an overview on 40 old and recent Maximum Power Point Tracking (MPPT) methods, available in the literature, is presented and classified. These methods are mathematically modeled and presented in such a way the reader can select the most appropriate method for his own application. A comparative table is presented at the end of the paper to simplify the classification of the different methods.

Recent progress in non-fullerene small molecule acceptors in organic solar cells (OSCs)

Abstract: Power conversion efficiency (PCE) has surpassed 10% for single junction organic solar cells (OSCs) mainly through the design and synthesis of novel donor materials, the optimization of film morphology and the evolution of the devices. However, the development of novel acceptor materials is relatively sluggish compared with the donor compounds. Nowadays, fullerene derivatives, such as PC61BM and PC71BM, are still the dominant acceptors due to their superior charge transporting properties. Unfortunately, these two acceptors suffer from some intrinsic shortcomings such as limited absorption, difficult functionalization, and high production cost. Therefore, developing novel non-fullerene acceptors that can overcome the above-mentioned disadvantages is highly desirable. As a matter of fact, research on non-fullerene acceptors has made considerable progress in the last two years and a highest PCE of around 12% has been achieved. In this review, we will summarize recent research progress in non-fullerene small molecule acceptors and compare these molecules' performances in OSCs employing the same donor materials. Moreover, the acceptors with excellent photovoltaic performance are highlighted and the reasons are elaborated. Finally, the implications and the challenges are proposed.

A comprehensive review on solar PV maximum power point tracking techniques

Abstract: In recent years solar energy has received worldwide attention in the field of renewable energy systems Among the various research thrusts in solar PV, the most proverbial area is extracting maximum power from solar PV system Application dof Maximum Power Point Tracking (MPPT) for extracting maximum power is very much appreciated and holds the key in developing efficient solar PV system In this paper, a state of the art review on various maximum power point techniques for solar PV systems covering timeworn conventional methods and latest soft computing algorithms is presented To date critical analysis on each of the method in terms of (1) tracking speed, (2) algorithm complexity, (3) Dynamic tracking under partial shading and (4) hardware implementation is not been carried out In this regard the authors have attempted to compile a comprehensive review on various solar PV MPPT techniques based on the above criteria Further, it is envisaged that the information presented in this review paper will be a valuable gathering of information for practicing engineers as well as for new researchers

Superflexible, high-efficiency perovskite solar cells utilizing graphene electrodes: towards future foldable power sources

Abstract: With rapid and brilliant progress in performance over recent years, perovskite solar cells have drawn increasing attention for portable power source applications. Their advantageous features such as high efficiency, low cost, light weight and flexibility should be maximized if a robust and reliable flexible transparent electrode is offered. Here we demonstrate highly efficient and reliable super flexible perovskite solar cells using graphene as a transparent electrode. The device performance reaches 16.8% with no hysteresis comparable to that of the counterpart fabricated on a flexible indium-tin-oxide electrode showing a maximum efficiency of 17.3%. The flexible devices also demonstrate superb stability against bending deformation, maintaining >90% of its original efficiency after 1000 bending cycles and 85% even after 5000 bending cycles with a bending radius of 2 mm. This overwhelming bending stability highlights that perovskite photovoltaics with graphene electrodes can pave the way for rollable and foldable photovoltaic applications.

Ternary Polymer Solar Cells based on Two Acceptors and One Donor for Achieving 12.2% Efficiency.

Abstract: Ternary polymer solar cells are fabricated based on one donor PBDB-T and two acceptors (a methyl-modified small-molecular acceptor (IT-M) and a bis-adduct of Bis[70]PCBM). A high power conversion efficiency of 12.2% can be achieved. The photovoltaic performance of the ternary polymer solar cells is not sensitive to the composition of the blend.

Diffusion engineering of ions and charge carriers for stable efficient perovskite solar cells

Abstract: Long-term stability is crucial for the future application of perovskite solar cells, a promising low-cost photovoltaic technology that has rapidly advanced in the recent years. Here, we designed a nanostructured carbon layer to suppress the diffusion of ions/molecules within perovskite solar cells, an important degradation process in the device. Furthermore, this nanocarbon layer benefited the diffusion of electron charge carriers to enable a high-energy conversion efficiency. Finally, the efficiency on a perovskite solar cell with an aperture area of 1.02 cm2, after a thermal aging test at 85 °C for over 500 h, or light soaking for 1,000 h, was stable of over 15% during the entire test. The present diffusion engineering of ions/molecules and photo generated charges paves a way to realizing long-term stable and highly efficient perovskite solar cells. Ion migration in perovskite solar cells are known to cause hysteresis and instability. Biet al., report a charge extraction layer based on graphene, fullerenes and carbon quantum dots which suppresses ion diffusion and enhances charge carrier diffusion leading to efficient devices with improved stability.

Stretchable and waterproof elastomer-coated organic photovoltaics for washable electronic textile applications

Abstract: Textile-compatible photovoltaics play a crucial role as a continuous source of energy in wearable devices. In contrast to other types of energy harvester, they can harvest sufficient electricity (on t he order of milliwatts) for wearable devices by utilizing the cloth itself as the platform for photovoltaics. Three features are important for textile-compatible photovoltaics, namely environmental stability, sufficient energy efficiency and mechanical robustness. However, achieving these simultaneously remains difficult because of the low gas barrier properties of ultrathin superstrates and substrates. Here, we report on ultraflexible organic photovoltaics coated on both sides with elastomer that simultaneously realize stretchability and stability in water whilst maintaining a high efficiency of 7.9%. The efficiency of double-side-coated devices decreases only by 5.4% after immersion in water for 120 min. Furthermore, the efficiency of the devices remains at 80% of the initial value even after 52% mechanical compression for 20 cycles with 100 min of water exposure. Organic solar cells can be thin, bendable and strechable. Now, Jinno et al. develop flexible organic photovoltaic devices that can also be washed in water and detergent, opening future integration routes into everyday objects such as fabric.

Photovoltaic Engineering Handbook

Abstract: TECHNOLOGICAL PROCESSES Solar cell technologies PHOTOVOLTAIC GENERATOR The photovoltaic generator Network of solar cells, modules, and arrays PHOTOVOLTAIC SYSTEMS ENGINEERING Storage batteries for photovoltaic power systems Electronic regulation Power conditioning Adaptation of a positive-displacement pump directly connected to a photovoltaic generator Centrifugal photovoltaic pumping CHARACTERIZATION AND TESTING METHODS International test procedures for photovoltaic modules Asian Institute of Technology photovoltaic module test bed system Testing of photovoltaic modules under natural conditions using the Asian Institute of Technology photovoltaic module test bed system Characterization procedure of photovoltaic refrigeration system Field trial procedure for a photovoltaic pumping system under natural conditions Battery-testing method for low-water-loss and starting, lighting, and ignition (automotive) batteries SIZING PROCEDURE The sizing of stand-alone photovoltaic power systems A dynamic simulation approach Prediction of photovoltaic system performance using cumulative frequency curves of irradiance ECONOMIC ANALYSIS Financial evaluation of renewable energy projects Comparative assessment of photovoltaics and handpumps for rural water supply Life-cycle cost comparison of alternative power supply for a portable pocket-sized stereo cassette tape recorder INSTRUMENTATION A simple metal-oxide-semiconductor field-effect transistor electronic variable load Equipment accommodation Terminology REFERENCES INDEX

A review on MPPT techniques of PV system under partial shading condition

Abstract: This paper presents a concise and an organized review of various maximum power point tracking (MPPT) algorithms implemented in the photovoltaic (PV) generation system useable under partial shading condition Various algorithms, PV modeling techniques, PV array configurations and controller topologies have been widely explored till date But, every technique always has its advantages as well as disadvantages simultaneously; as a result, a proper literature review is essential while designing a PV generation system (PGS) under partial shading condition In this paper, the detailed review of MPPT algorithms has been done The review on MPPT techniques has been classified into mainly four essential groups The first among them includes all the new MPPT optimization algorithms, the second group includes the hybrid MPPT algorithms, the third category includes new modeling approach, and the fourth category includes the various converter topologies This paper provides an accessible reference to undertake mass research works in PV systems in the near future under partial shading condition

Metal halide perovskite tandem and multiple-junction photovoltaics

Abstract: The tunable bandgap of perovskites and their combination in multi-junction solar cells can afford highly efficient photovoltaic technologies. This Review reports the latest developments in tandem multi-junction perovskite solar cells and discusses prospects for this technology to achieve energy conversion efficiencies well beyond those attained by silicon-based cells.