Journal ArticleDOI
Consensus stability testing protocols for organic photovoltaic materials and devices
Matthew O. Reese,Suren A. Gevorgyan,Mikkel Jørgensen,Eva Bundgaard,Sarah Kurtz,David S. Ginley,Dana C. Olson,Matthew T. Lloyd,Pasquale Morvillo,Eugene A. Katz,Andreas Elschner,Olivier Haillant,Travis Currier,Vishal Shrotriya,Martin Hermenau,Moritz Riede,Kiril R. Kirov,Gregor Trimmel,Thomas Rath,Olle Inganäs,Fengling Zhang,Mattias Andersson,Kristofer Tvingstedt,Monica Lira-Cantu,Darin W. Laird,Christine McGuiness,Srinivas (Jimmy) Gowrisanker,Michael Pannone,Min Xiao,Jens Hauch,Roland Steim,Dean M. DeLongchamp,Roland Rösch,Harald Hoppe,Nieves Espinosa,Antonio Urbina,Gülsah Yaman-Uzunoglu,Jörg-Bernd Bonekamp,Albert J.J.M. van Breemen,Claudio Girotto,Eszter Voroshazi,Frederik C. Krebs +41 more
TLDR
Procedures for testing organic solar cell devices and modules with respect to stability and operational lifetime are described and generally agreed test conditions and practices are generally agreed to allow ready comparison between laboratories and to help improving the reliability of reported values.About:
This article is published in Solar Energy Materials and Solar Cells.The article was published on 2011-05-01. It has received 805 citations till now. The article focuses on the topics: Protocol (science).read more
Citations
More filters
Journal ArticleDOI
Biomimetic Approach to Inhibition of Photooxidation in Organic Solar Cells Using Beta-Carotene as an Additive.
Vida Turkovic,Michela Prete,Mikkel Bregnhøj,Liana N. Inasaridze,Dmytro Volyniuk,Filipp A. Obrezkov,Juozas V. Grazulevicius,Sebastian Engmann,Horst-Günter Rubahn,Pavel A. Troshin,Pavel A. Troshin,Peter R. Ogilby,Morten Madsen +12 more
TL;DR: It is shown that beta-carotene (BC), an inexpensive and green, naturally-occurring antioxidant, dramatically improves OPV stability and causes the "burn-in" of PTB7:[70]PCBM devices, and that BC effectively mitigates it.
Journal ArticleDOI
Wavelength influence on the photodegradation of P3HT:PCBM organic solar cells
TL;DR: In this paper, a study on the photodegradation of standard architecture P3HT:PCBM organic solar cells as a function of the incident radiation wavelength is presented, and it was found that blue (400 −510 nm) and ultraviolet (310 −410 nm) wavelengths are the most harmful wavelengths.
Journal ArticleDOI
Quantifying Performance of Permeation Barrier—Encapsulation Systems for Flexible and Glass-Based Electronics and Their Application to Perovskite Solar Cells
Journal ArticleDOI
Photoinduced degradation from trace 1,8-diiodooctane in organic photovoltaics
Ian E. Jacobs,Faustine Wang,Zaira I. Bedolla Valdez,Alejandra N. Ayala Oviedo,David J. Bilsky,Adam J. Moulé +5 more
TL;DR: In this paper, the amount of residual DIO in bulk heterojunction (BHJ) layers was quantified using NMR and it was found that most completed devices contain trapped DIO.
Journal ArticleDOI
Progress in ambient air-processed perovskite solar cells: Insights into processing techniques and stability assessment
TL;DR: In this paper, the influence of water, air, temperature, light and packaging on the perovskite solar cells is discussed and standard protocols like ISOS protocols for stability tests are adopted.
References
More filters
Journal ArticleDOI
Stability/degradation of polymer solar cells
TL;DR: In this article, the current understanding of stability/degradation in organic and polymer solar cell devices is presented and the methods for studying and elucidating degradation are discussed Methods for enhancing the stability through the choice of better active materials, encapsulation, application of getter materials and UV-filters are also discussed
Journal ArticleDOI
Accurate Measurement and Characterization of Organic Solar Cells
TL;DR: In this article, the spectral properties of organic solar cells under standard reporting conditions were measured using four types of organic test cells and two types of silicon reference cells (unfiltered and with a KG5 color filter).
Proceedings ArticleDOI
Commonly observed degradation in field-aged photovoltaic modules
TL;DR: In this paper, the authors define observed degradation in field-aged photovoltaic modules, including degradation of packaging materials, adhesional loss, degradation of interconnects, degradation due to moisture intrusion, and semiconductor device degradation, and suggest that the onset and progression of degradation need to be studied to gain a more comprehensive understanding of module degradation rates and module failures.
Journal ArticleDOI
A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules
Frederik C. Krebs,Suren A. Gevorgyan,Bobak Gholamkhass,Steven Holdcroft,Cody W. Schlenker,Mark E. Thompson,Barry C. Thompson,Dana C. Olson,David S. Ginley,Sean E. Shaheen,Sean E. Shaheen,Husam N. Alshareef,John W. Murphy,W. Justin Youngblood,Nathan C. Heston,John R. Reynolds,Shijun Jia,Darin W. Laird,Sachetan M. Tuladhar,Justin Dane,Pedro Atienzar,Jenny Nelson,Jan M. Kroon,MM Martijn Wienk,René A. J. Janssen,Kristofer Tvingstedt,Fengling Zhang,Mattias Andersson,Olle Inganäs,Monica Lira-Cantu,Remi de Bettignies,Stéphane Guillerez,Tom Aernouts,David Cheyns,Laurence Lutsen,Birger Zimmermann,Uli Würfel,Michael Niggemann,Hans-Frieder Schleiermacher,Paul Liska,Michael Grätzel,Panagiotis Lianos,Eugene A. Katz,Wolfgang Lohwasser,Bertrand Jannon +44 more
TL;DR: A round robin for the performance of roll-to-roll coated flexible large-area polymer solarcell modules involving 18 different laboratories in Northern America, Europe and Middle East is presented in this paper.
Journal ArticleDOI
Determination of the degradation constant of bulk heterojunction solar cells by accelerated lifetime measurements
TL;DR: In this article, the short circuit current under white light illumination was monitored over time for different temperatures, ranging from 40 °C to 105 °C, and an Arrhenius type dependence of the degradation constant with temperature was observed and an activation energy of ∼350 meV was derived.