Oak Ridge National Laboratory

About: Oak Ridge National Laboratory is a facility organization based out in Oak Ridge, Tennessee, United States. It is known for research contribution in the topics: Neutron & Ion. The organization has 31868 authors who have published 73724 publications receiving 2633689 citations. The organization is also known as: ORNL.

High-Speed Separations on a Microchip

Abstract: Fast, efficient separations are sought in liquid-phase analyses which incorporate a nondiscriminatory sample injection scheme and can implement a variety of detection modes. A glass microchip device for free solution electrophoresis was fabricated using standard photolithographic procedures and chemical wet etching. Separations were performed at several separation lengths from the injector to the detector with electric field strengths from 0.06 to 1.5 kV/cm. For a separation length of 0.9 mm, electrophoretic separations with baseline resolution are achieved in less than 150 ms with an electric field strength of 1.5 kV/cm and an efficiency of 1820 plates/s. For a separation length of 11.1 mm, a minimum plate height of 0.7 [mu]m and a maximum number of plates per second of 18,600 were achieved. 19 refs., 5 figs., 2 tabs.

Improved inversion channel mobility for 4H-SiC MOSFETs following high temperature anneals in nitric oxide

Abstract: Results presented in this letter demonstrate that the effective channel mobility of lateral, inversion-mode 4H-SiC MOSFETs is increased significantly after passivation of SiC/SiO/sub 2/ interface states near the conduction band edge by high temperature anneals in nitric oxide. Hi-lo capacitance-voltage (C-V) and ac conductance measurements indicate that, at 0.1 eV below the conduction band edge, the interface trap density decreases from approximately 2/spl times/10/sup 13/ to 2/spl times/10/sup 12/ eV/sup -1/ cm/sup -2/ following anneals in nitric oxide at 1175/spl deg/C for 2 h. The effective channel mobility for MOSFETs fabricated with either wet or dry oxides increases by an order of magnitude to approximately 30-35 cm/sup 2//V-s following the passivation anneals.

ALICE: Physics Performance Report, Volume II

Abstract: ALICE is a general-purpose heavy-ion experiment designed to study the physics of strongly interacting matter and the quark–gluon plasma in nucleus–nucleus collisions at the LHC. It currently involves more than 900 physicists and senior engineers, from both the nuclear and high-energy physics sectors, from over 90 institutions in about 30 countries.The ALICE detector is designed to cope with the highest particle multiplicities above those anticipated for Pb–Pb collisions (dNch/dy up to 8000) and it will be operational at the start-up of the LHC. In addition to heavy systems, the ALICE Collaboration will study collisions of lower-mass ions, which are a means of varying the energy density, and protons (both pp and pA), which primarily provide reference data for the nucleus–nucleus collisions. In addition, the pp data will allow for a number of genuine pp physics studies.The detailed design of the different detector systems has been laid down in a number of Technical Design Reports issued between mid-1998 and the end of 2004. The experiment is currently under construction and will be ready for data taking with both proton and heavy-ion beams at the start-up of the LHC.Since the comprehensive information on detector and physics performance was last published in the ALICE Technical Proposal in 1996, the detector, as well as simulation, reconstruction and analysis software have undergone significant development. The Physics Performance Report (PPR) provides an updated and comprehensive summary of the performance of the various ALICE subsystems, including updates to the Technical Design Reports, as appropriate.The PPR is divided into two volumes. Volume I, published in 2004 (CERN/LHCC 2003-049, ALICE Collaboration 2004 J. Phys. G: Nucl. Part. Phys. 30 1517–1763), contains in four chapters a short theoretical overview and an extensive reference list concerning the physics topics of interest to ALICE, the experimental conditions at the LHC, a short summary and update of the subsystem designs, and a description of the offline framework and Monte Carlo event generators.The present volume, Volume II, contains the majority of the information relevant to the physics performance in proton–proton, proton–nucleus, and nucleus–nucleus collisions. Following an introductory overview, Chapter 5 describes the combined detector performance and the event reconstruction procedures, based on detailed simulations of the individual subsystems. Chapter 6 describes the analysis and physics reach for a representative sample of physics observables, from global event characteristics to hard processes.

Analyses of the Scattering of Nuclear Particles by Collective Nuclei in Terms of the Coupled-Channel Calculation

Abstract: The formalism of the coupled-channel analysis of the scattering of nuclear projectiles by nuclei is presented in detail. Since the necessity for coupled-channel calculations increases with the degree of collectivity exhibited by the target nucleus, the presentation is particularly suited to collective nuclei, with the target states described by phenomenological collective coordinates. Within this restriction the formalism given here is quite general so that the following cases can be considered: The target can be any (collective) nucleus, even-$A$ or odd-$A$, vibrational or rotational; the projectile can be either charged or uncharged, and can have any spin; either or both the projectile and the target can be polarized; finally, the energy of the projectile can be very low since the contribution of the compound-state formation to the cross section can be included. Using a computer program which was written following the above formalism (which can be used to do any of the calculations enumerated above) scattering cross sections for several typical cases were obtained and are presented to show their contrasting behavior when different targets (and different coupling schemes) and different projectiles are chosen. Realistic calculations were also made in order to fit a large number of existing experimental data. Good fits were obtained in most cases which indicates that the coupled-channel calculation is a very powerful tool in explaining various complicated scattering data, and further in extracting useful spectroscopic informations about the target nucleus. Possible future developments of the present analyses are discussed.

Synthesis of Novel Thin-Film Materials by Pulsed Laser Deposition

Abstract: Pulsed laser deposition (PLD) is a conceptually and experimentally simple yet highly versatile tool for thin-film and multilayer research. Its advantages for the film growth of oxides and other chemically complex materials include stoichiometric transfer, growth from an energetic beam, reactive deposition, and inherent simplicity for the growth of multilayered structures. With the use of PLD, artificially layered materials and metastable phases have been created and their properties varied by control of the layer thicknesses. In situ monitoring techniques have provided information about the role of energetic species in the formation of ultrahard phases and in the doping of semiconductors. Cluster-assembled nanocrystalline and composite films offer opportunities to control and produce new combinations of properties with PLD.