scispace - formally typeset
Journal ArticleDOI

Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review

TLDR
A review of the recent developments in the wood pyrolysis and reports the characteristics of the resulting bio-oils, which are the main products of fast wood pyrotechnics, can be found in this paper.
Abstract
Fast pyrolysis utilizes biomass to produce a product that is used both as an energy source and a feedstock for chemical production. Considerable efforts have been made to convert wood biomass to liquid fuels and chemicals since the oil crisis in mid-1970s. This review focuses on the recent developments in the wood pyrolysis and reports the characteristics of the resulting bio-oils, which are the main products of fast wood pyrolysis. Virtually any form of biomass can be considered for fast pyrolysis. Most work has been performed on wood, because of its consistency and comparability between tests. However, nearly 100 types of biomass have been tested, ranging from agricultural wastes such as straw, olive pits, and nut shells to energy crops such as miscanthus and sorghum. Forestry wastes such as bark and thinnings and other solid wastes, including sewage sludge and leather wastes, have also been studied. In this review, the main (although not exclusive) emphasis has been given to wood. The literature on woo...

read more

Citations
More filters
Journal ArticleDOI

A review and future directions in techno-economic modeling and optimization of upstream forest biomass to bio-oil supply chains

TL;DR: In this paper, the authors present an overview and classification of the existing methods and contributions for the upstream segment of the forest biomass to bio-oil supply chain and present the key components of upstream supply chain decision making.
Journal ArticleDOI

Mo2C catalyzed vapor phase hydrodeoxygenation of lignin-derived phenolic compound mixtures to aromatics under ambient pressure

TL;DR: In this article, high aromatics yield was obtained from vapor phase hydrodeoxygenation (HDO) of phenolic compound mixtures containing m-cresol, anisole, 1,2-dimethoxybenzene, and guaiacol over molybdenum carbide catalysts (Mo2C) under atmospheric pressure at 533-553 K.
Journal ArticleDOI

Pyrolysis of cellulose catalysed by nanopowder metal oxides: production and characterisation of a chiral hydroxylactone and its role as building block

TL;DR: In this paper, experiments with a fixed bed reactor showed that the yields of chiral cyclic hydroxylactone (LAC) could be significantly increased by pyrolysing cellulose for few minutes at 350 °C in the presence of nanopowder (NP) titanium dioxide, aluminium oxide, and aluminium titanate (AlTi).
Journal ArticleDOI

Pyrolysis of municipal plastic wastes II: Influence of raw material composition under catalytic conditions.

TL;DR: The zeolite has shown to be very effective to produce liquids with great aromatics content and C3-C4 fraction rich gases, even though the raw material was mainly composed of polyolefins.
References
More filters
Journal ArticleDOI

Dissolution of Cellose with Ionic Liquids

TL;DR: In this paper, the authors demonstrate that cellulose can be dissolved without activation or pretreatment in, and regenerated from, 1-butyl-3-methylimidazolium chloride and other hydrophilic ionic liquids.
Journal ArticleDOI

Energy production from biomass (Part 1): Overview of biomass.

TL;DR: The potential of a restored landfill site to act as a biomass source, providing fuel to supplement landfill gas-fuelled power stations, is examined, together with a comparison of the economics of power production from purpose-grown biomass versus waste-biomass.
Journal ArticleDOI

Overview of Applications of Biomass Fast Pyrolysis Oil

TL;DR: In this article, the authors reviewed scientific and technical developments in applications of bio-oil to date and concluded with some suggestions for research and strategic developments, and concluded that biooil is a renewable liquid fuel and can also be used for production of chemicals.
Journal ArticleDOI

Energy production from biomass. (Part 2): Conversion technologies

TL;DR: A brief review of the main conversion processes is presented, with specific regard to the production of a fuel suitable for spark ignition gas engines.
Journal ArticleDOI

Renewable fuels and chemicals by thermal processing of biomass

TL;DR: In this article, a review of thermal conversion processes and particularly the reactors that have been developed to provide the necessary conditions to optimise performance is presented, and the main technical and non-technical barriers to implementation are identified.
Related Papers (5)