Showing papers in "Energy and Environmental Science in 2014"
TL;DR: In this article, the pseudocapacitance properties of transition metal oxides have been investigated and a review of the most relevant pseudo-capacitive materials in aqueous and non-aqueous electrolytes is presented.
Abstract: Electrochemical energy storage technology is based on devices capable of exhibiting high energy density (batteries) or high power density (electrochemical capacitors). There is a growing need, for current and near-future applications, where both high energy and high power densities are required in the same material. Pseudocapacitance, a faradaic process involving surface or near surface redox reactions, offers a means of achieving high energy density at high charge–discharge rates. Here, we focus on the pseudocapacitive properties of transition metal oxides. First, we introduce pseudocapacitance and describe its electrochemical features. Then, we review the most relevant pseudocapacitive materials in aqueous and non-aqueous electrolytes. The major challenges for pseudocapacitive materials along with a future outlook are detailed at the end.
3,930 citations
TL;DR: In this article, various factors that affect the morphology and Coulombic efficiency of Li metal anodes have been analyzed, and the results obtained by modelling of Li dendrite growth have also been reviewed.
Abstract: Lithium (Li) metal is an ideal anode material for rechargeable batteries due to its extremely high theoretical specific capacity (3860 mA h g−1), low density (0.59 g cm−3) and the lowest negative electrochemical potential (−3.040 V vs. the standard hydrogen electrode). Unfortunately, uncontrollable dendritic Li growth and limited Coulombic efficiency during Li deposition/stripping inherent in these batteries have prevented their practical applications over the past 40 years. With the emergence of post-Li-ion batteries, safe and efficient operation of Li metal anodes has become an enabling technology which may determine the fate of several promising candidates for the next generation energy storage systems, including rechargeable Li–air batteries, Li–S batteries, and Li metal batteries which utilize intercalation compounds as cathodes. In this paper, various factors that affect the morphology and Coulombic efficiency of Li metal anodes have been analyzed. Technologies utilized to characterize the morphology of Li deposition and the results obtained by modelling of Li dendrite growth have also been reviewed. Finally, recent development and urgent need in this field are discussed.
3,394 citations
TL;DR: In this article, the effect of replacing the methylammonium cation in this perovskite was explored, and it was shown that with the slightly larger formamidinium lead trihalide cation, one can synthesise a peroviscite with a bandgap tunable between 1.48 and 2.23 eV.
Abstract: Perovskite-based solar cells have attracted significant recent interest, with power conversion efficiencies in excess of 15% already superceding a number of established thin-film solar cell technologies. Most work has focused on a methylammonium lead trihalide perovskites, with a bandgaps of ∼1.55 eV and greater. Here, we explore the effect of replacing the methylammonium cation in this perovskite, and show that with the slightly larger formamidinium cation, we can synthesise formamidinium lead trihalide perovskites with a bandgap tunable between 1.48 and 2.23 eV. We take the 1.48 eV-bandgap perovskite as most suited for single junction solar cells, and demonstrate long-range electron and hole diffusion lengths in this material, making it suitable for planar heterojunction solar cells. We fabricate such devices, and due to the reduced bandgap we achieve high short-circuit currents of >23 mA cm−2, resulting in power conversion efficiencies of up to 14.2%, the highest efficiency yet for solution processed planar heterojunction perovskite solar cells. Formamidinium lead triiodide is hence promising as a new candidate for this class of solar cell.
3,220 citations
TL;DR: In this paper, the first completely lead-free, CH3NH3SnI3 perovskite solar cell was constructed on a mesoporous TiO2 scaffold.
Abstract: Already exhibiting solar to electrical power conversion efficiencies of over 17%, organic–inorganic lead halide perovskite solar cells are one of the most promising emerging contenders in the drive to provide a cheap and clean source of energy One concern however, is the potential toxicology issue of lead, a key component in the archetypical material The most likely substitute is tin, which like lead, is also a group 14 metal While organic–inorganic tin halide perovskites have shown good semiconducting behaviour, the instability of tin in its 2+ oxidation state has thus far proved to be an overwhelming challenge Here, we report the first completely lead-free, CH3NH3SnI3 perovskite solar cell processed on a mesoporous TiO2 scaffold, reaching efficiencies of over 6% under 1 sun illumination Remarkably, we achieve open circuit voltages over 088 V from a material which has a 123 eV band gap
1,972 citations
TL;DR: In this article, the authors review the leading CO2 capture technologies, available in the short and long term, and their technological maturity, before discussing CO2 transport and storage, as well as the economic and legal aspects of CCS.
Abstract: In recent years, Carbon Capture and Storage (Sequestration) (CCS) has been proposed as a potential method to allow the continued use of fossil-fuelled power stations whilst preventing emissions of CO2 from reaching the atmosphere. Gas, coal (and biomass)-fired power stations can respond to changes in demand more readily than many other sources of electricity production, hence the importance of retaining them as an option in the energy mix. Here, we review the leading CO2 capture technologies, available in the short and long term, and their technological maturity, before discussing CO2 transport and storage. Current pilot plants and demonstrations are highlighted, as is the importance of optimising the CCS system as a whole. Other topics briefly discussed include the viability of both the capture of CO2 from the air and CO2 reutilisation as climate change mitigation strategies. Finally, we discuss the economic and legal aspects of CCS.
1,752 citations
University of Surrey1, University of New Mexico2, Colorado School of Mines3, Pennsylvania State University4, Georgia Institute of Technology5, Imperial College London6, University of Connecticut7, MESA+ Institute for Nanotechnology8, Newcastle University9, University of Science and Technology of China10, Wuhan University11
TL;DR: In this paper, an up-to-date perspective on the use of anion-exchange membranes in fuel cells, electrolysers, redox flow batteries, reverse electrodialysis cells, and bioelectrochemical systems (e.g. microbial fuel cells).
Abstract: This article provides an up-to-date perspective on the use of anion-exchange membranes in fuel cells, electrolysers, redox flow batteries, reverse electrodialysis cells, and bioelectrochemical systems (e.g. microbial fuel cells). The aim is to highlight key concepts, misconceptions, the current state-of-the-art, technological and scientific limitations, and the future challenges (research priorities) related to the use of anion-exchange membranes in these energy technologies. All the references that the authors deemed relevant, and were available on the web by the manuscript submission date (30th April 2014), are included.
1,526 citations
TL;DR: Ionic liquids offer a unique suite of properties that make them important candidates for a number of energy related applications, such as fuel cell electrolytes and CO2 absorbents for post-combustion CO2 capture as mentioned in this paper.
Abstract: Ionic liquids offer a unique suite of properties that make them important candidates for a number of energy related applications. Cation–anion combinations that exhibit low volatility coupled with high electrochemical and thermal stability, as well as ionic conductivity, create the possibility of designing ideal electrolytes for batteries, super-capacitors, actuators, dye sensitised solar cells and thermo-electrochemical cells. In the field of water splitting to produce hydrogen they have been used to synthesize some of the best performing water oxidation catalysts and some members of the protic ionic liquid family co-catalyse an unusual, very high energy efficiency water oxidation process. As fuel cell electrolytes, the high proton conductivity of some of the protic ionic liquid family offers the potential of fuel cells operating in the optimum temperature region above 100 °C. Beyond electrochemical applications, the low vapour pressure of these liquids, along with their ability to offer tuneable functionality, also makes them ideal as CO2 absorbents for post-combustion CO2 capture. Similarly, the tuneable phase properties of the many members of this large family of salts are also allowing the creation of phase-change thermal energy storage materials having melting points tuned to the application. This perspective article provides an overview of these developing energy related applications of ionic liquids and offers some thoughts on the emerging challenges and opportunities.
1,427 citations
TL;DR: In this paper, a review of the application of metal-organic frameworks (MOFs) in photocatalytic degradation of organic pollutants is presented, where the reported examples are collected and analyzed; and the reaction mechanism, the influence of various factors on the catalytic performance, involved challenges, and the prospect are discussed and estimated.
Abstract: Efficient removal of organic pollutants from wastewater has become a hot research topic due to its ecological and environmental importance. Traditional water treatment methods such as adsorption, coagulation, and membrane separation suffer from high operating costs, and even generate secondary pollutants. Photocatalysis on semiconductor catalysts (TiO2, ZnO, Fe2O3, CdS, GaP, and ZnS) has demonstrated efficiency in degrading a wide range of organic pollutants into biodegradable or less toxic organic compounds, as well as inorganic CO2, H2O, NO3−, PO43−, and halide ions. However, the difficult post-separation, easy agglomeration, and low solar energy conversion efficiency of these inorganic catalysts limit their large scale applications. Exploitation of new catalysts has been attracting great attention in the related research communities. In the past two decades, a class of newly-developed inorganic–organic hybrid porous materials, namely metal–organic frameworks (MOFs) has generated rapid development due to their versatile applications such as in catalysis and separation. Recent research has showed that these materials, acting as catalysts, are quite effective in the photocatalytic degradation of organic pollutants. This review highlights research progress in the application of MOFs in this area. The reported examples are collected and analyzed; and the reaction mechanism, the influence of various factors on the catalytic performance, the involved challenges, and the prospect are discussed and estimated. It is clear that MOFs have a bright future in photocatalysis for pollutant degradation.
1,338 citations
TL;DR: In this paper, the authors summarized the recent research progress of flexible lithium-ion batteries, with special emphasis on electrode material selectivity and battery structural design, and discussed the prospects and challenges toward the practical uses of flexible batteries in electronic devices.
Abstract: With the advent of flexible electronics, flexible lithium-ion batteries have attracted great attention as a promising power source in the emerging field of flexible and wearable electronic devices such as roll-up displays, touch screens, conformable active radio-frequency identification tags, wearable sensors and implantable medical devices. In this review, we summarize the recent research progress of flexible lithium-ion batteries, with special emphasis on electrode material selectivity and battery structural design. We begin with a brief introduction of flexible lithium-ion batteries and the current development of flexible solid-state electrolytes for applications in this field. This is followed by a detailed overview of the recent progress on flexible electrode materials based on carbon nanotubes, graphene, carbon cloth, conductive paper (cellulose), textiles and some other low-dimensional nanostructured materials. Then recently proposed prototypes of flexible cable/wire type, transparent and stretchable lithium-ion batteries are highlighted. The latest advances in the exploration of other flexible battery systems such as lithium–sulfur, Zn–C (MnO2) and sodium-ion batteries, as well as related electrode materials are included. Finally, the prospects and challenges toward the practical uses of flexible lithium-ion batteries in electronic devices are discussed.
1,271 citations
TL;DR: In this paper, the authors present the state-of-the-art with respect to the preparation of activated carbons, with emphasis on the more interesting recent developments that allow better control or maximization of porosity, the use of cheap and readily available precursors and tailoring of morphology.
Abstract: Porous carbons have several advantageous properties with respect to their use in energy applications that require constrained space such as in electrode materials for supercapacitors and as solid state hydrogen stores. The attractive properties of porous carbons include, ready abundance, chemical and thermal stability, ease of processability and low framework density. Activated carbons, which are perhaps the most explored class of porous carbons, have been traditionally employed as catalyst supports or adsorbents, but lately they are increasingly being used or find potential applications in the fabrication of supercapacitors and as hydrogen storage materials. This manuscript presents the state-of-the-art with respect to the preparation of activated carbons, with emphasis on the more interesting recent developments that allow better control or maximization of porosity, the use of cheap and readily available precursors and tailoring of morphology. This review will show that the renewed interest in the synthesis of activated carbons is matched by intensive investigations into their use in supercapacitors, where they remain the electrode materials of choice. We will also show that activated carbons have been extensively studied as hydrogen storage materials and remain a strong candidate in the search for porous materials that may enable the so-called Hydrogen Economy, wherein hydrogen is used as an energy carrier. The use of activated carbons as energy materials has in the recent past and is currently experiencing rapid growth, and this review aims to present the more significant advances.
1,162 citations
TL;DR: In this article, a review focusing on the out-of-the-box synthetic techniques capable of deriving hierarchical porous carbons (HPCs) with superior application profiles is presented.
Abstract: Hierarchically porous carbons (HPCs) with 1D to 3D network are attracting vast interest due to their potential technological application profile ranging from electrochemical capacitors, lithium ion batteries, solar cells, hydrogen storage systems, photonic material, fuel cells, sorbent for toxic gas separation and so on. Natural raw-materials such as biomass-biopolymer derived hierarchical nanostructured carbons are especially attractive for their uniform pore dimensions which can be adjustable over a wide range of length scales. Good electrical conductivity, high surface area, and excellent chemical stability are unique physicochemical properties which are responsible for micro/nanostructured porous carbon to be highly trusted candidate for emerging nanotechnologies. This review focuses on the ‘out-of-the-box’ synthetic techniques capable of deriving HPC with superior application profiles. The article presents the promising scope of accessing HPCs from (1) hard-templating, soft-templating, and non-templating routes, (2) biopolymers with a major focus on non-templating strategies. Subsequently, emerging strategies of hetero-atom doping in porous carbon nanostructures are discussed. The review will highlight the contribution of synergistic effect of macro–meso–micropores on a range of emerging applications such as CO2 capture, carbon photonic crystal sensors, Li–S batteries, and supercapacitor. Mechanism of ion transport and buffering, electrical double layer enhancement have been discussed in the context of pore structure and shapes. We will also show the differences of HPC and ordered mesoporous carbon (OMC) in terms of their synthesis strategies and choices of template for self-assembly. How the remarkable mechanical strength of the HPCs can be achieved by selecting self-assembling template, whereas collapse of mesostructure via decomposition of framework occurs due to poor thermal stability or high N-content of the carbon source will be discussed.
TL;DR: In this article, an interdiffusion method was proposed to fabricate pinhole free perovskite films using a low temperature solution process, achieving an efficiency of 15.4% with a fill factor of ∼80%.
Abstract: We report on an interdiffusion method to fabricate pin-hole free perovskite films using a low temperature (<105 °C) solution process. A high efficiency of 15.4%, with a fill factor of ∼80%, was achieved for the devices under one sun illumination. The interdiffusion method results in high device yield, with an efficiency of above 14.5% for more than 85% of the devices.
TL;DR: In this article, a review of the microstructure and electrochemical performance relations of MoS2-based anodes and cathodes for secondary lithium ion batteries (LIBs) is presented.
Abstract: This is the first targeted review of the synthesis – microstructure – electrochemical performance relations of MoS2 – based anodes and cathodes for secondary lithium ion batteries (LIBs). Molybdenum disulfide is a highly promising material for LIBs that compensates for its intermediate insertion voltage (∼2 V vs. Li/Li+) with a high reversible capacity (up to 1290 mA h g−1) and an excellent rate capability (e.g. 554 mA h g−1 after 20 cycles at 50 C). Several themes emerge when surveying the scientific literature on the subject: first, we argue that there is excellent data to show that truly nanoscale structures, which often contain a nanodispersed carbon phase, consistently possess superior charge storage capacity and cycling performance. We provide several hypotheses regarding why the measured capacities in such architectures are well above the theoretical predictions of the known MoS2 intercalation and conversion reactions. Second, we highlight the growing microstructural and electrochemical evidence that the layered MoS2 structure does not survive past the initial lithiation cycle, and that subsequently the electrochemically active material is actually elemental sulfur. Third, we show that certain synthesis techniques are consistently demonstrated to be the most promising for battery applications, and describe these in detail. Fourth, we present our selection of synthesis methods that we believe to have a high potential for creating improved MoS2 LIB electrodes, but are yet to be tried.
TL;DR: In this article, the authors observe slow transient effects causing hysteresis in the current-voltage characterization of hybrid organo-metal halide perovskites that can lead to an over- or underestimation of the solar cell device efficiency.
Abstract: Hybrid organo-metal halide perovskites are an exciting new class of solar absorber materials and have exhibited a rapid increase in solar cell efficiencies throughout the past two years to over 17% in both meso-structured and thin-film device architectures. We observe slow transient effects causing hysteresis in the current–voltage characterization of these devices that can lead to an over- or underestimation of the solar cell device efficiency. We find that the current–voltage (IV) measurement scan direction, measurement delay time, and light and voltage bias conditions prior to measurement can all have a significant impact upon the shape of the measured IV light curves and the apparent device efficiency. We observe that hysteresis-free light IV curves can be obtained at both extremely fast and slow voltage scan rates but only in the latter case are quasi-steady-state conditions achieved for a valid power conversion efficiency measurement. Hysteretic effects are also observed in devices utilizing alternative selective contacts but differ in magnitude and time scale, suggesting that the contact interfaces have a big effect on transients in perovskite-absorber devices. The transient processes giving rise to hysteresis are consistent with a polarization response of the perovskite absorber that results in changes in the photocurrent extraction efficiency of the device. The strong dependence of the hysteresis on light and voltage biasing conditions in thin film devices for a period of time prior to the measurement suggests that photo-induced ion migration may additionally play an important role in device hysteresis. Based on these observations, we provide recommendations for correct measurement and reporting of IV curves for perovskite solar cell devices.
TL;DR: In this article, the authors reviewed the recent advances in fabrication of materials and devices and provided a critical analysis of reported performances of micro-supercapacitors, including intrinsic properties of electrode materials and electrolyte, architectural design of the device and fabrication methods.
Abstract: Miniaturized energy storage is essential for the continuous development and further miniaturization of electronic devices. Electrochemical capacitors (ECs), also called supercapacitors, are energy storage devices with a high power density, fast charge and discharge rates, and long service life. Small-scale supercapacitors, or micro-supercapacitors, can be integrated with microelectronic devices to work as stand-alone power sources or as efficient energy storage units complementing batteries and energy harvesters, leading to wider use of these devices in many industries. In recent years, the research in this field has rapidly advanced and micro-supercapacitors with improved storage capacity and power density have been developed. The important factors affecting the performance of micro-supercapacitors are the intrinsic properties of electrode materials and electrolyte, architectural design of the device and the fabrication methods. This paper reviews the recent advances in fabrication of materials and devices and provides a critical analysis of reported performances of micro-supercapacitors.
TL;DR: Flexible solid-state supercapacitors (SCs) have attracted increasing interest because they can provide substantially higher specific/volumetric energy density compared to conventional capacitors.
Abstract: Increasing power and energy demands for next-generation portable and flexible electronics such as roll-up displays, photovoltaic cells, and wearable devices have stimulated intensive efforts to explore flexible, lightweight and environmentally friendly energy storage devices. Flexible solid-state supercapacitors (SCs) have attracted increasing interest because they can provide substantially higher specific/volumetric energy density compared to conventional capacitors. Additionally, flexible solid-state SCs are typically small in size, highly reliable, light-weight, easy to handle, and have a wide range of operation temperatures. In this regard, solid-state SCs hold great promise as new energy storage devices for flexible and wearable electronics. In this article, we review recent achievements in the design, fabrication and characterization of flexible solid-state SCs. Moreover, we also discuss the current challenges and future opportunities for the development of high-performance flexible solid-state SCs.
TL;DR: In this article, the authors proposed a cost-effective molybdenum phosphide that exhibits high activity towards the hydrogen evolution reaction (HER) in both acid and alkaline media even in bulk form.
Abstract: Electrochemical production of hydrogen from water has been directed to the search for non-noble metal based and earth-abundant catalysts. In this work, we propose a novel cost-effective catalyst, molybdenum phosphide that exhibits high activity towards the hydrogen evolution reaction (HER) in both acid and alkaline media even in bulk form. Comparative analysis of Mo, Mo3P and MoP as catalysts for HER clearly indicates that phosphorization can potentially modify the properties of the metal and different degrees of phosphorization lead to distinct activities and stabilities. Theoretical calculations by density functional theory also show that a simple phosphorization of molybdenum to form MoP introduces a good ‘H delivery’ system which attains nearly zero binding to H at a certain H coverage. With the combination of experimental results and theoretical calculations, this work has enlightened a new way of exploring cost-effective catalysts for HER.
TL;DR: In this article, the authors summarize recent progress in the development of high-performance earth-abundant inorganic electrocatalysts (and nanostructures thereof), classifying these materials based on their elemental constituents.
Abstract: Electrocatalysis plays a key role in the energy conversion processes central to several renewable energy technologies that have been developed to lessen our reliance on fossil fuels. However, the best electrocatalysts for these processes—which include the hydrogen evolution reaction (HER), the oxygen reduction reaction (ORR), and the redox reactions that enable regenerative liquid-junction photoelectrochemical solar cells—often contain scarce and expensive noble metals, substantially limiting the potential for these technologies to compete with fossil fuels. The considerable challenge is to develop robust electrocatalysts composed exclusively of low-cost, earth-abundant elements that exhibit activity comparable to that of the noble metals. In this review, we summarize recent progress in the development of such high-performance earth-abundant inorganic electrocatalysts (and nanostructures thereof), classifying these materials based on their elemental constituents. We then detail the most critical obstacles facing earth-abundant inorganic electrocatalysts and discuss various strategies for further improving their performance. Lastly, we offer our perspectives on the current directions of earth-abundant inorganic electrocatalyst development and suggest pathways toward achieving performance competitive with their noble metal-containing counterparts.
TL;DR: In this article, the recent developments and the characteristics of membrane separators for rechargeable lithium-ion batteries are reviewed and the outlook and future directions in this research field are also given.
Abstract: In this paper, the recent developments and the characteristics of membrane separators for lithium-ion batteries are reviewed. In recent years, there have been intensive efforts to develop advanced battery separators for rechargeable lithium-ion batteries for different applications such as portable electronics, electric vehicles, and energy storage for power grids. The separator is a critical component of lithium-ion batteries since it provides a physical barrier between the positive and negative electrodes in order to prevent electrical short circuits. The separator also serves as the electrolyte reservoir for the transport of ions during the charging and discharging cycles of a battery. The performance of lithium-ion batteries is greatly affected by the materials and structure of the separators. This paper introduces the requirements of battery separators and the structure and properties of five important types of membrane separators which are microporous membranes, modified microporous membranes, non-woven mats, composite membranes and electrolyte membranes. Each separator type has inherent advantages and disadvantages which influence the performance of lithium-ion batteries. The structures, characteristics, manufacturing, modification, and performance of separators are described in this review paper. The outlook and future directions in this research field are also given.
TL;DR: In this paper, the effect of pH on the hydrogen oxidation and evolution reaction (HOR/HER) rates is addressed for the first time for the three most active monometallic surfaces: Pt, Ir, and Pd carbon-supported catalysts.
Abstract: The effect of pH on the hydrogen oxidation and evolution reaction (HOR/HER) rates is addressed for the first time for the three most active monometallic surfaces: Pt, Ir, and Pd carbon-supported catalysts. Kinetic data were obtained for a proton exchange membrane fuel cell (PEMFC; pH ≈ 0) using the H2-pump mode and with a rotating disk electrode (RDE) in 0.1 M NaOH. Our findings point toward: (i) a similar ≈100-fold activity decrease on all these surfaces when going from low to high pH; (ii) a reaction rate controlled by the Volmer step on Pt/C; and (iii) the H-binding energy being the unique and sole descriptor for the HOR/HER in alkaline electrolytes. Based on a detailed discussion of our data, we propose a new mechanism for the HOR/HER on Pt-metals in alkaline electrolytes.
TL;DR: In this article, a metatranscriptomic analysis of methanogenic aggregates from a brewery wastewater digester, coupled with fluorescence in situ hybridization with specific 16S rRNA probes, revealed that Methanosaeta species were the most abundant and metabolically active methanogens.
Abstract: Anaerobic conversion of organic wastes and biomass to methane is an important bioenergy strategy, which depends on poorly understood mechanisms of interspecies electron transfer to methanogenic microorganisms. Metatranscriptomic analysis of methanogenic aggregates from a brewery wastewater digester, coupled with fluorescence in situ hybridization with specific 16S rRNA probes, revealed that Methanosaeta species were the most abundant and metabolically active methanogens. Methanogens known to reduce carbon dioxide with H2 or formate as the electron donor were rare. Although Methanosaeta have previously been thought to be restricted to acetate as a substrate for methane production, Methanosaeta in the aggregates had a complete complement of genes for the enzymes necessary for the reduction of carbon to methane, and transcript abundance for these genes was high. Furthermore, Geobacter species, the most abundant bacteria in the aggregates, highly expressed genes for ethanol metabolism and for extracellular electron transfer via electrically conductive pili, suggesting that Geobacter and Methanosaeta species were exchanging electrons via direct interspecies electron transfer (DIET). This possibility was further investigated in defined co-cultures of Geobacter metallireducens and Methanosaeta harundinacea which stoichiometrically converted ethanol to methane. Transcriptomic, radiotracer, and genetic analysis demonstrated that M. harundinacea accepted electrons via DIET for the reduction of carbon dioxide to methane. The discovery that Methanosaeta species, which are abundant in a wide diversity of methanogenic environments, are capable of DIET has important implications not only for the functioning of anaerobic digesters, but also for global methane production.
TL;DR: A comprehensive review about the most recent progress in synthesis, characterization, fundamental understanding, and performance of graphene and graphene oxide sponges can be found in this paper, where the technical challenges are discussed, and several future research directions are also suggested.
Abstract: This paper gives a comprehensive review about the most recent progress in synthesis, characterization, fundamental understanding, and the performance of graphene and graphene oxide sponges. Practical applications are considered including use in composite materials, as the electrode materials for electrochemical sensors, as absorbers for both gases and liquids, and as electrode materials for devices involved in electrochemical energy storage and conversion. Several advantages of both graphene and graphene oxide sponges such as three dimensional graphene networks, high surface area, high electro/thermo conductivities, high chemical/electrochemical stability, high flexibility and elasticity, and extremely high surface hydrophobicity are emphasized. To facilitate further research and development, the technical challenges are discussed, and several future research directions are also suggested in this paper.
TL;DR: In this paper, the authors reported the origin of the high efficiency in solution-processable bilayer solar cells based on methylammonium lead iodide (CH3NH3PbI3) and [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM).
Abstract: This work reports a study into the origin of the high efficiency in solution-processable bilayer solar cells based on methylammonium lead iodide (CH3NH3PbI3) and [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM). Our cell has a power conversion efficiency (PCE) of 5.2% under simulated AM 1.5G irradiation (100 mW cm−2) and an internal quantum efficiency of close to 100%, which means that nearly all the absorbed photons are converted to electrons and are efficiently collected at the electrodes. This implies that the exciton diffusion, charge transfer and charge collection are highly efficient. The high exciton diffusion efficiency is enabled by the long diffusion length of CH3NH3PbI3 relative to its thickness. Furthermore, the low exciton binding energy of CH3NH3PbI3 implies that exciton splitting at the CH3NH3PbI3/PC61BM interface is very efficient. With further increase in CH3NH3PbI3 thickness, a higher PCE of 7.4% could be obtained. This is the highest efficiency attained for low temperature solution-processable bilayer solar cells to date.
TL;DR: In this article, a heat-treated Li2S-P2S5 glass-ceramic conductor has an extremely high ionic conductivity of 1.7 × 10−2 S cm−1 and the lowest conduction activation energy of 17 kJ mol−1 at room temperature.
Abstract: We report that a heat-treated Li2S–P2S5 glass-ceramic conductor has an extremely high ionic conductivity of 1.7 × 10−2 S cm−1 and the lowest conduction activation energy of 17 kJ mol−1 at room temperature among lithium-ion conductors reported to date. The optimum conditions of the heat treatment reduce the grain boundary resistance, and the influence of voids, to increase the Li+ ionic conductivity of the solid electrolyte so that it is greater than the conductivities of liquid electrolytes, when the transport number of lithium ions in the inorganic electrolyte is unity.
TL;DR: In this paper, a highly active and stable electrochemical catalyst of nanoporous molybdenum carbide nanowires (np-Mo2C NWs) was developed for hydrogen evolution reaction (HER).
Abstract: A highly active and stable electrochemical catalyst of nanoporous molybdenum carbide nanowires (np-Mo2C NWs) has been developed for hydrogen evolution reaction (HER). The np-Mo2C NWs were synthesized simply by pyrolysis of a MoOx/amine hybrid precursor with sub-nanosized periodic structure under an inert atmosphere. The enriched nanoporosity and large reactive surface of these highly dispersed nanowires with uniform Mo2C nanocrystallites provide an efficient electrocatalysis, leading to their superior HER activity with lower onset overpotential and higher current densities than Mo2C microparticles. This study opens a new perspective for the development of highly active non-noble electrocatalysts for hydrogen production from water splitting.
TL;DR: In this article, the authors organize the CO2 sorbents according to their working temperatures by classifying them as such: (1) low-temperature ( 400 °C), since the sorption capacity, kinetics, recycling stability and cost are important parameters when evaluating a sorbent.
Abstract: Carbon dioxide (CO2) capture using solid sorbents has been recognized as a very promising technology that has attracted intense attention from both academic and industrial fields in the last decade. It is astonishing that around 2000 papers have been published from 2011 to 2014 alone, which is less than three years after our first review paper in this journal on solid CO2 sorbents was published. In this short period, much progress has been made and the major research focus has more or less changed. Therefore, we feel that it is necessary to give a timely update on solid CO2 capture materials, although we still have to keep some important literature results published in the past years so as to keep the good continuity. We believe this work will benefit researchers working in both academic and industrial areas. In this paper, we still organize the CO2 sorbents according to their working temperatures by classifying them as such: (1) low-temperature ( 400 °C). Since the sorption capacity, kinetics, recycling stability and cost are important parameters when evaluating a sorbent, these features will be carefully considered and discussed. In addition, due to the huge amounts of cost-effective CO2 sorbents demanded and the importance of waste resources, solid CO2 sorbents prepared from waste resources and their performance are reviewed. Finally, the techno-economic assessments of various CO2 sorbents and technologies in real applications are briefly discussed.
TL;DR: A detailed overview of the energy harvesting technologies associated with piezoelectric materials along with the closely related sub-classes of pyroelectrics and ferro-electrics can be found in this article.
Abstract: This review provides a detailed overview of the energy harvesting technologies associated with piezoelectric materials along with the closely related sub-classes of pyroelectrics and ferroelectrics. These properties are, in many cases, present in the same material, providing the intriguing prospect of a material that can harvest energy from multiple sources including vibration, thermal fluctuations and light. Piezoelectric materials are initially discussed in the context of harvesting mechanical energy from vibrations using inertial energy harvesting, which relies on the resistance of a mass to acceleration, and kinematic energy harvesting which directly couples the energy harvester to the relative movement of different parts of a source. Issues related to mode of operation, loss mechanisms and using non-linearity to enhance the operating frequency range are described along with the potential materials that could be employed for harvesting vibrations at elevated temperatures. In addition to inorganic piezoelectric materials, compliant piezoelectric materials are also discussed. Piezoelectric energy harvesting devices are complex multi-physics systems requiring advanced methodologies to maximise their performance. The research effort to develop optimisation methods for complex piezoelectric energy harvesters is then reviewed. The use of ferroelectric or multi-ferroic materials to convert light into chemical or electrical energy is then described in applications where the internal electric field can prevent electron–hole recombination or enhance chemical reactions at the ferroelectric surface. Finally, pyroelectric harvesting generates power from temperature fluctuations and this review covers the modes of pyroelectric harvesting such as simple resistive loading and Olsen cycles. Nano-scale pyroelectric systems and novel micro-electro-mechanical-systems designed to increase the operating frequency are discussed.
TL;DR: In this paper, a review focuses on recent progress in the experimental and computational studies of the roles of heteroatoms in heterogeneous nanocarbons for electrocatalytic oxygen reduction reaction (ORR).
Abstract: Heterogeneous nanocarbon materials are being increasingly investigated and deployed in numerous new technologies and devices for sustainable energy conversion and storage. Nanocarbons often consist of fullerene, graphene and carbon nanotubes. Their derivatives include quantum dots, nanofibres, nanoribbons, nanospheres/capsules and other nanostructured morphologies. The heterogeneous forms of these nanocarbons stem from the implantation of alien atoms into the aromatic carbon lattice or the covalent grafting of functional groups onto the carbon basal plane or edge sites. Heterogeneous nanocarbons have shown remarkable advantages in solar cells, water splitting, supercapacitors, lithium ion batteries and catalysis. This review focuses on recent progress in the experimental and computational studies of the roles of heteroatoms in heterogeneous nanocarbons for electrocatalytic oxygen reduction reaction (ORR). Critical perspectives are devoted to the ambiguous phenomena in this emerging research area. The long standing debate about the active sites is discussed with an emphasis on more rational development of advanced nanocarbon-based electrocatalysts for ORR.
TL;DR: In this article, the performance of Chinese human hair carbonized at 800 °C exhibited high charge storage capacity with a specific capacitance of 340 F g−1 in 6 M KOH at a current density of 1 A g− 1 and good stability over 20 000 cycles.
Abstract: Heteroatom doped porous carbon flakes were prepared via carbonization of Chinese human hair fibers and employed for high-performance supercapacitor electrode materials. The morphology and chemical composition of the resultant carbon materials were characterized by electron microscopy (EM), energy-dispersive X-ray spectroscopy (EDX), and X-ray photoelectron spectroscopy (XPS) measurements. Human hair carbonized at 800 °C exhibited high charge storage capacity with a specific capacitance of 340 F g−1 in 6 M KOH at a current density of 1 A g−1 and good stability over 20 000 cycles. The specific capacitance of 126 F g−1 is also verified in a 1 M LiPF6 ethylene carbonate/diethyl carbonate (EC/DEC) organic electrolyte at a current density of 1 A g−1. The high supercapacitor performance could be due to the micro/mesoporosity combined with high effective surface area and heteroatom doping effects, combining double layer and Faradaic contributions.
TL;DR: In this paper, the authors summarize the relationships between very large reduction of the lattice thermal conductivity with all-scale hierarchical architecturing, large enhanced Seebeck coefficients with intra-matrix electronic structure engineering, and control of the carrier mobility with matrix/inclusion band alignment.
Abstract: This review discusses recent developments and current research in high performance bulk thermoelectric materials, comprising nanostructuring, mesostructuring, band alignment, band engineering and synergistically defining key strategies for boosting the thermoelectric performance. To date, the dramatic enhancements in the figure of merit achieved in bulk thermoelectric materials have come either from the reduction in lattice thermal conductivity or improvement in power factors, or both of them. Here, we summarize these relationships between very large reduction of the lattice thermal conductivity with all-scale hierarchical architecturing, large enhanced Seebeck coefficients with intra-matrix electronic structure engineering, and control of the carrier mobility with matrix/inclusion band alignment, which enhance the power factor and reduce the lattice thermal conductivity. The new concept of hierarchical compositionally alloyed nanostructures to achieve these effects is presented. Systems based on PbTe, PbSe and PbS in which spectacular advances have been demonstrated are given particular emphasis. A discussion of future possible strategies is aimed at enhancing the thermoelectric figure of merit of these materials.