Showing papers on "Magnetization published in 2016"

Electrical switching of an antiferromagnet.

Abstract: Antiferromagnets are hard to control by external magnetic fields because of the alternating directions of magnetic moments on individual atoms and the resulting zero net magnetization. However, relativistic quantum mechanics allows for generating current-induced internal fields whose sign alternates with the periodicity of the antiferromagnetic lattice. Using these fields, which couple strongly to the antiferromagnetic order, we demonstrate room-temperature electrical switching between stable configurations in antiferromagnetic CuMnAs thin-film devices by applied current with magnitudes of order 106 ampere per square centimeter. Electrical writing is combined in our solid-state memory with electrical readout and the stored magnetic state is insensitive to and produces no external magnetic field perturbations, which illustrates the unique merits of antiferromagnets for spintronics.

Room-temperature chiral magnetic skyrmions in ultrathin magnetic nanostructures

Abstract: Magnetic skyrmions are chiral spin structures with a whirling configuration. Their topological properties, nanometre size and the fact that they can be moved by small current densities have opened a new paradigm for the manipulation of magnetization at the nanoscale. Chiral skyrmion structures have so far been experimentally demonstrated only in bulk materials and in epitaxial ultrathin films, and under an external magnetic field or at low temperature. Here, we report on the observation of stable skyrmions in sputtered ultrathin Pt/Co/MgO nanostructures at room temperature and zero external magnetic field. We use high lateral resolution X-ray magnetic circular dichroism microscopy to image their chiral Neel internal structure, which we explain as due to the large strength of the Dzyaloshinskii–Moriya interaction as revealed by spin wave spectroscopy measurements. Our results are substantiated by micromagnetic simulations and numerical models, which allow the identification of the physical mechanisms governing the size and stability of the skyrmions.

A Stable Pentagonal Bipyramidal Dy(III) Single-Ion Magnet with a Record Magnetization Reversal Barrier over 1000 K.

Abstract: Single-molecule magnets (SMMs) with a large spin reversal barrier have been recognized to exhibit slow magnetic relaxation that can lead to a magnetic hysteresis loop. Synthesis of highly stable SMMs with both large energy barriers and significantly slow relaxation times is challenging. Here, we report two highly stable and neutral Dy(III) classical coordination compounds with pentagonal bipyramidal local geometry that exhibit SMM behavior. Weak intermolecular interactions in the undiluted single crystals are first observed for mononuclear lanthanide SMMs by micro-SQUID measurements. The investigation of magnetic relaxation reveals the thermally activated quantum tunneling of magnetization through the third excited Kramers doublet, owing to the increased axial magnetic anisotropy and weaker transverse magnetic anisotropy. As a result, pronounced magnetic hysteresis loops up to 14 K are observed, and the effective energy barrier (Ueff = 1025 K) for relaxation of magnetization reached a breakthrough among the SMMs.

Magnetization switching by spin–orbit torque in an antiferromagnet–ferromagnet bilayer system

Abstract: Spin-orbit torque (SOT)-induced magnetization switching shows promise for realizing ultrafast and reliable spintronics devices. Bipolar switching of the perpendicular magnetization by the SOT is achieved under an in-plane magnetic field collinear with an applied current. Typical structures studied so far comprise a nonmagnet/ferromagnet (NM/FM) bilayer, where the spin Hall effect in the NM is responsible for the switching. Here we show that an antiferromagnet/ferromagnet (AFM/FM) bilayer system also exhibits a SOT large enough to switch the magnetization of the FM. In this material system, thanks to the exchange bias of the AFM, we observe the switching in the absence of an applied field by using an antiferromagnetic PtMn and ferromagnetic Co/Ni multilayer with a perpendicular easy axis. Furthermore, tailoring the stack achieves a memristor-like behaviour where a portion of the reversed magnetization can be controlled in an analogue manner. The AFM/FM system is thus a promising building block for SOT devices as well as providing an attractive pathway towards neuromorphic computing.

On Approaching the Limit of Molecular Magnetic Anisotropy: A Near-Perfect Pentagonal Bipyramidal Dysprosium(III) Single-Molecule Magnet.

Abstract: We report a monometallic dysprosium complex, [Dy(OtBu)2(py)5][BPh4] (5), that shows the largest effective energy barrier to magnetic relaxation of Ueff=1815(1) K. The massive magnetic anisotropy is due to bis-trans-disposed tert-butoxide ligands with weak equatorial pyridine donors, approaching proposed schemes for high-temperature single-molecule magnets (SMMs). The blocking temperature, TB , is 14 K, defined by zero-field-cooled magnetization experiments, and is the largest for any monometallic complex and equal with the current record for [Tb2N2{N(SiMe3)2}4(THF)2].

Symmetry-Supported Magnetic Blocking at 20 K in Pentagonal Bipyramidal Dy(III) Single-Ion Magnets

Abstract: Single-molecule magnets (SMMs) that can be trapped in one of the bistable magnetic states separated by an energy barrier are among the most promising candidates for high-density information storage, quantum processing, and spintronics. To date, a considerable series of achievements have been made. However, the presence of fast quantum tunnelling of magnetization (QTM) in most SMMs, especially in single-ion magnets (SIMs), provides a rapid relaxation route and often sets up a limit for the relaxation time. Here, we pursue the pentagonal bipyramidal symmetry to suppress the QTM and present pentagonal bipyramidal Dy(III) SIMs [Dy(Cy3PO)2(H2O)5]Cl3·(Cy3PO)·H2O·EtOH (1) and [Dy(Cy3PO)2(H2O)5]Br3·2(Cy3PO)·2H2O·2EtOH (2), (Cy3PO = tricyclohexyl phosphine oxide). Magnetic characterizations reveal their fascinating SMM properties with high energy barriers as 472(7) K for 1 and 543(2) K for 2, along with a record magnetic hysteresis temperature up to 20 K for 2. These results, combined with the ab initio calculations, offer an illuminating insight into the vast possibility and potential of what the symmetry rules can achieve in molecular magnetism.

An air-stable Dy(iii) single-ion magnet with high anisotropy barrier and blocking temperature

Abstract: Herein we report air-stable Dy(III) and Er(III) single-ion magnets (SIMs) with pseudo-D5h symmetry, synthesized from a sterically encumbered phosphonamide, tBuPO(NHiPr)2, where the Dy(III)-SIM exhibits a magnetization blocking (TB) up to 12 K, defined from the maxima of the zero-field cooled magnetization curve, with an anisotropy barrier (Ueff) as high as 735.4 K. The Dy(III)-SIM exhibits a magnetic hysteresis up to 12 K (30 K) with a large coercivity of ∼0.9 T (∼1.5 T) at a sweep rate of ∼0.0018 T s−1 (0.02 T s−1). These high values combined with persistent stability under ambient conditions, render this system as one of the best-characterized SIMs. Ab initio calculations have been used to establish the connection between the higher-order symmetry of the molecule and the quenching of quantum tunnelling of magnetization (QTM) effects. The relaxation of magnetization is observed via the second excited Kramers doublet owing to pseudo-high-order symmetry, which quenches the QTM. This study highlights fine-tuning of symmetry around the lanthanide ion to obtain new-generation SIMs and offers further scope for pushing the limits of Ueff and TB using this approach.

Spin–orbit torque switching without an external field using interlayer exchange coupling

Abstract: A new approach to magnetic switching by spin–orbit torque uses interlayer exchange coupling to overcome the need for an external magnetic field. Manipulation of the magnetization of a perpendicular ferromagnetic free layer by spin–orbit torque (SOT)1,2,3,4 is an attractive alternative to spin-transfer torque (STT) in oscillators and switches such as magnetic random-access memory (MRAM) where a high current is passed across an ultrathin tunnel barrier5. A small symmetry-breaking bias field is usually needed for deterministic SOT switching but it is impractical to generate the field externally for spintronic applications. Here, we demonstrate robust zero-field SOT switching of a perpendicular CoFe free layer where the symmetry is broken by magnetic coupling to a second in-plane exchange-biased CoFe layer via a nonmagnetic Ru or Pt spacer6. The preferred magnetic state of the free layer is determined by the current polarity and the sign of the interlayer exchange coupling (IEC). Our strategy offers a potentially scalable solution to realize bias-field-free switching that can lead to a generation of SOT devices, combining a high storage density and endurance with a low power consumption.

Multiferroic Heterostructures Integrating Ferroelectric and Magnetic Materials.

Abstract: Multiferroic heterostructures can be synthesized by integrating monolithic ferroelectric and magnetic materials, with interfacial coupling between electric polarization and magnetization, through the exchange of elastic, electric, and magnetic energy. Although the nature of the interfaces remains to be unraveled, such cross coupling can be utilized to manipulate the magnetization (or polarization) with an electric (or magnetic) field, known as a converse (or direct) magnetoelectric effect. It can be exploited to significantly improve the performance of or/and add new functionalities to many existing or emerging devices such as memory devices, tunable microwave devices, sensors, etc. The exciting technological potential, along with the rich physical phenomena at the interface, has sparked intensive research on multiferroic heterostructures for more than a decade. Here, we summarize the most recent progresses in the fundamental principles and potential applications of the interface-based magnetoelectric effect in multiferroic heterostructures, and present our perspectives on some key issues that require further study in order to realize their practical device applications.

Controlled lateral anisotropy in correlated manganite heterostructures by interface-engineered oxygen octahedral coupling

Abstract: Controlled in-plane rotation of the magnetic easy axis in manganite heterostructures by tailoring the interface oxygen network could allow the development of correlated oxide-based magnetic tunnelling junctions with non-collinear magnetization, with possible practical applications as miniaturized high-switching-speed magnetic random access memory (MRAM) devices. Here, we demonstrate how to manipulate magnetic and electronic anisotropic properties in manganite heterostructures by engineering the oxygen network on the unit-cell level. The strong oxygen octahedral coupling is found to transfer the octahedral rotation, present in the NdGaO3 (NGO) substrate, to the La2/3Sr1/3MnO3 (LSMO) film in the interface region. This causes an unexpected realignment of the magnetic easy axis along the short axis of the LSMO unit cell as well as the presence of a giant anisotropic transport in these ultrathin LSMO films. As a result we possess control of the lateral magnetic and electronic anisotropies by atomic-scale design of the oxygen octahedral rotation

Giant Anomalous Hall Effect in the Chiral Antiferromagnet Mn 3 Ge

Abstract: The lineup of moments in an antiferromagnet yields no net magnetization, which means for such a material we expect no useful anomalous Hall effect (AHE) for applications. However, this study identifies an antiferromagnetic compound that, due to its exotic electronic structure, $d\phantom{\rule{0}{0ex}}o\phantom{\rule{0}{0ex}}e\phantom{\rule{0}{0ex}}s$ show a strikingly large AHE, at room temperature. This is significant for creating nonvolatile memory with minimal stray fields, which allows a much higher bit density than is currently possible, and is also of general interest in the study of correlated electron systems.

Generation of coherent spin-wave modes in yttrium iron garnet microdiscs by spin-orbit torque.

Abstract: In recent years, spin-orbit effects have been widely used to produce and detect spin currents in spintronic devices. The peculiar symmetry of the spin Hall effect allows creation of a spin accumulation at the interface between a metal with strong spin-orbit interaction and a magnetic insulator, which can lead to a net pure spin current flowing from the metal into the insulator. This spin current applies a torque on the magnetization, which can eventually be driven into steady motion. Tailoring this experiment on extended films has proven to be elusive, probably due to mode competition. This requires the reduction of both the thickness and lateral size to reach full damping compensation. Here we show clear evidence of coherent spin-orbit torque-induced auto-oscillation in micron-sized yttrium iron garnet discs of thickness 20 nm. Our results emphasize the key role of quasi-degenerate spin-wave modes, which increase the threshold current.

Electric-field control of spin–orbit torque in a magnetically doped topological insulator

Abstract: Electric-field manipulation of magnetic order has proved of both fundamental and technological importance in spintronic devices. So far, electric-field control of ferromagnetism, magnetization and magnetic anisotropy has been explored in various magnetic materials, but the efficient electric-field control of spin-orbit torque (SOT) still remains elusive. Here, we report the effective electric-field control of a giant SOT in a Cr-doped topological insulator (TI) thin film using a top-gate field-effect transistor structure. The SOT strength can be modulated by a factor of four within the accessible gate voltage range, and it shows strong correlation with the spin-polarized surface current in the film. Furthermore, we demonstrate the magnetization switching by scanning gate voltage with constant current and in-plane magnetic field applied in the film. The effective electric-field control of SOT and the giant spin-torque efficiency in Cr-doped TI may lead to the development of energy-efficient gate-controlled spin-torque devices compatible with modern field-effect semiconductor technologies.

Giant facet-dependent spin-orbit torque and spin Hall conductivity in the triangular antiferromagnet IrMn3

Abstract: There has been considerable interest in spin-orbit torques for the purpose of manipulating the magnetization of ferromagnetic elements for spintronic technologies. Spin-orbit torques are derived from spin currents created from charge currents in materials with significant spin-orbit coupling that propagate into an adjacent ferromagnetic material. A key challenge is to identify materials that exhibit large spin Hall angles, that is, efficient charge-to-spin current conversion. Using spin torque ferromagnetic resonance, we report the observation of a giant spin Hall angle θ SH eff of up to ~0.35 in (001)-oriented single-crystalline antiferromagnetic IrMn 3 thin films, coupled to ferromagnetic permalloy layers, and a θ SH eff that is about three times smaller in (111)-oriented films. For (001)-oriented samples, we show that the magnitude of θ SH eff can be significantly changed by manipulating the populations of various antiferromagnetic domains through perpendicular field annealing. We identify two distinct mechanisms that contribute to θ SH eff : the first mechanism, which is facet-independent, arises from conventional bulk spin-dependent scattering within the IrMn 3 layer, and the second intrinsic mechanism is derived from the unconventional antiferromagnetic structure of IrMn 3 . Using ab initio calculations, we show that the triangular magnetic structure of IrMn 3 gives rise to a substantial intrinsic spin Hall conductivity that is much larger for the (001) than for the (111) orientation, consistent with our experimental findings.

Kitaev exchange and field-induced quantum spin-liquid states in honeycomb α -RuCl 3

Abstract: Large anisotropic exchange in 5d and 4d oxides and halides open the door to new types of magnetic ground states and excitations, inconceivable a decade ago. A prominent case is the Kitaev spin liquid, host of remarkable properties such as protection of quantum information and the emergence of Majorana fermions. Here we discuss the promise for spin-liquid behavior in the 4d5 honeycomb halide α-RuCl3. From advanced electronic-structure calculations, we find that the Kitaev interaction is ferromagnetic, as in 5d5 iridium honeycomb oxides, and indeed defines the largest superexchange energy scale. A ferromagnetic Kitaev coupling is also supported by a detailed analysis of the field-dependent magnetization. Using exact diagonalization and density-matrix renormalization group techniques for extended Kitaev-Heisenberg spin Hamiltonians, we find indications for a transition from zigzag order to a gapped spin liquid when applying magnetic field. Our results offer a unified picture on recent magnetic and spectroscopic measurements on this material and open new perspectives on the prospect of realizing quantum spin liquids in d5 halides and oxides in general.

Spin-orbit excitation energies, anisotropic exchange, and magnetic phases of honeycomb RuCl3

Abstract: Using quantum chemistry calculations we shed fresh light on the electronic structure and magnetic properties of RuCl3, a proposed realization of the honeycomb Kitaev spin model. It is found that the nearest-neighbor Kitaev exchange K is weaker than in 5d5 Ir oxides but still larger than other effective spin couplings. The electronic-structure computations also indicate a ferromagnetic K in the halide, which is supported by a detailed analysis of the field-dependent magnetization. From exact-diagonalization calculations for extended Kitaev-Heisenberg Hamiltonians we additionally find that a transition from zigzag order to a spin-liquid ground state can be induced in RuCl3 with external magnetic field.

Tailoring the physical properties of Ni-based single-phase equiatomic alloys by modifying the chemical complexity

Abstract: Equiatomic alloys (e.g. high entropy alloys) have recently attracted considerable interest due to their exceptional properties, which might be closely related to their extreme disorder induced by the chemical complexity. In order to understand the effects of chemical complexity on their fundamental physical properties, a family of (eight) Ni-based, face-center-cubic (FCC), equiatomic alloys, extending from elemental Ni to quinary high entropy alloys, has been synthesized, and their electrical, thermal, and magnetic properties are systematically investigated in the range of 4-300 K by combining experiments with ab initio Korring-Kohn-Rostoker coherent-potential-approximation (KKR-CPA) calculations. The scattering of electrons is significantly increased due to the chemical (especially magnetic) disorder. It has weak correlation with the number of elements but strongly depends on the type of elements. Thermal conductivities of the alloys are largely lower than pure metals, primarily because the high electrical resistivity suppresses the electronic thermal conductivity. The temperature dependence of the electrical and thermal transport properties is further discussed, and the magnetization of five alloys containing three or more elements is measured in magnetic fields up to 4 T.

Long-range magnetic interactions and proximity effects in an amorphous exchange-spring magnet

Abstract: Low-dimensional magnetic heterostructures are a key element of spintronics, where magnetic interactions between different materials often define the functionality of devices. Although some interlayer exchange coupling mechanisms are by now well established, the possibility of direct exchange coupling via proximity-induced magnetization through non-magnetic layers is typically ignored due to the presumed short range of such proximity effects. Here we show that magnetic order can be induced throughout a 40-nm-thick amorphous paramagnetic layer through proximity to ferromagnets, mediating both exchange-spring magnet behaviour and exchange bias. Furthermore, Monte Carlo simulations show that nearest-neighbour magnetic interactions fall short in describing the observed effects and long-range magnetic interactions are needed to capture the extent of the induced magnetization. The results highlight the importance of considering the range of interactions in low-dimensional heterostructures and how magnetic proximity effects can be used to obtain new functionality.

Room-temperature magnetic topological Weyl fermion and nodal line semimetal states in half-metallic Heusler Co 2 TiX (X=Si, Ge, or Sn)

Abstract: Topological semimetals (TSMs) including Weyl semimetals and nodal-line semimetals are expected to open the next frontier of condensed matter and materials science. Although the first inversion breaking Weyl semimetal was recently discovered in TaAs, its magnetic counterparts, i.e., the time-reversal breaking Weyl and nodal line semimetals, remain elusive. They are predicted to exhibit exotic properties distinct from the inversion breaking TSMs including TaAs. In this paper, we identify the magnetic topological semimetal states in the ferromagnetic half-metal compounds Co2TiX (X = Si, Ge, or Sn) with Curie temperatures higher than 350 K. Our first-principles band structure calculations show that, in the absence of spin-orbit coupling, Co2TiX features three topological nodal lines. The inclusion of spin-orbit coupling gives rise to Weyl nodes, whose momentum space locations can be controlled as a function of the magnetization direction. Our results not only open the door for the experimental realization of topological semimetal states in magnetic materials at room temperature, but also suggest potential applications such as unusual anomalous Hall effect in engineered monolayers of the Co2TiX compounds at high temperature.

Studying the effect of Zn-substitution on the magnetic and hyperthermic properties of cobalt ferrite nanoparticles

Abstract: The possibility to finely control nanostructured cubic ferrites (M(II)Fe2O4) paves the way to design materials with the desired magnetic properties for specific applications. However, the strict and complex interrelation among the chemical composition, size, polydispersity, shape and surface coating renders their correlation with the magnetic properties not trivial to predict. In this context, this work aims to discuss the magnetic properties and the heating abilities of Zn-substituted cobalt ferrite nanoparticles with different zinc contents (ZnxCo1-xFe2O4 with 0 100 emu g(-1)). The increase in the zinc content up to x = 0.46 in the structure has resulted in an increase of the saturation magnetisation (Ms) at 5 K. High Ms values have also been revealed at room temperature (∼90 emu g(-1)) for both CoFe2O4 and Zn0.30Co0.70Fe2O4 samples and their heating ability has been tested. Despite a similar saturation magnetisation, the specific absorption rate value for the cobalt ferrite is three times higher than the Zn-substituted one. DC magnetometry results were not sufficient to justify these data, the experimental conditions of SAR and static measurements being quite different. The synergic combination of DC with AC magnetometry and (57)Fe Mossbauer spectroscopy represents a powerful tool to get new insights into the design of suitable heat mediators for magnetic fluid hyperthermia.

Protostellar disc formation enabled by removal of small dust grains

Abstract: It has been shown that a realistic level of magnetization of dense molecular cloud cores can suppress the formation of a rotationally supported disk (RSD) through catastrophic magnetic braking in the axisymmetric ideal MHD limit. In this study, we present conditions for the formation of RSDs through non-ideal MHD effects computed self-consistently from an equilibrium chemical network. We find that removing from the standard MRN distribution the large population of very small grains (VSGs) of ~10 $A$ to few 100 $A$ that dominate the coupling of the bulk neutral matter to the magnetic field increases the ambipolar diffusivity by ~1--2 orders of magnitude at densities below 10$^{10}$ cm$^{-3}$. The enhanced ambipolar diffusion (AD) in the envelope reduces the amount of magnetic flux dragged by the collapse into the circumstellar disk-forming region. Therefore, magnetic braking is weakened and more angular momentum can be retained. With continuous high angular momentum inflow, RSDs of tens of AU are able to form, survive, and even grow in size, depending on other parameters including cosmic-ray ionization rate, magnetic field strength, and rotation speed. Some disks become self-gravitating and evolve into rings in our 2D (axisymmetric) simulations, which have the potential to fragment into (close) multiple systems in 3D. We conclude that disk formation in magnetized cores is highly sensitive to chemistry, especially to grain sizes. A moderate grain coagulation/growth to remove the large population of VSGs, either in the prestellar phase or during free-fall collapse, can greatly promote AD and help formation of tens of AU RSDs.

Nanopatterning reconfigurable magnetic landscapes via thermally assisted scanning probe lithography

Abstract: The search for novel tools to control magnetism at the nanoscale is crucial for the development of new paradigms in optics, electronics and spintronics. So far, the fabrication of magnetic nanostructures has been achieved mainly through irreversible structural or chemical modifications. Here, we propose a new concept for creating reconfigurable magnetic nanopatterns by crafting, at the nanoscale, the magnetic anisotropy landscape of a ferromagnetic layer exchange-coupled to an antiferromagnetic layer. By performing localized field cooling with the hot tip of a scanning probe microscope, magnetic structures, with arbitrarily oriented magnetization and tunable unidirectional anisotropy, are reversibly patterned without modifying the film chemistry and topography. This opens unforeseen possibilities for the development of novel metamaterials with finely tuned magnetic properties, such as reconfigurable magneto-plasmonic and magnonic crystals. In this context, we experimentally demonstrate spatially controlled spin wave excitation and propagation in magnetic structures patterned with the proposed method.

High-Magnetization FeCo Nanochains with Ultrathin Interfacial Gaps for Broadband Electromagnetic Wave Absorption at Gigahertz.

Abstract: Superparamagnetic FeCo nanochains consisting of assembled ∼25 nm nanoparticles and ∼1 nm gaps are synthesized by facial wet-chemical route and exhibit significant electromagnetic absorption at gigahertz. Both the dielectric and magnetic loss factors present dual-resonance behaviors at 2–18 GHz frequencies, originated from the asymmetric architecture of the cubic FeCo particles that assembled in a one-dimensional chain structure. Theoretical analyses uncover that the origins of the enhancement of electromagnetic losses are ascribed to the high magnetization (228 emu/g) and the ultrathin gaps (∼1 nm), which enhances the Snoek limit and induces anisotropic dielectric polarizations, consequently constructing a proper electromagnetic match.

Spin-torque generator engineered by natural oxidation of Cu.

Abstract: The spin Hall effect is a spin-orbit coupling phenomenon, which enables electric generation and detection of spin currents. This relativistic effect provides a way for realizing efficient spintronic devices based on electric manipulation of magnetization through spin torque. However, it has been believed that heavy metals are indispensable for the spin-torque generation. Here we show that the spin Hall effect in Cu, a light metal with weak spin-orbit coupling, is significantly enhanced through natural oxidation. We demonstrate that the spin-torque generation efficiency of a Cu/Ni81Fe19 bilayer is enhanced by over two orders of magnitude by tuning the surface oxidation, reaching the efficiency of Pt/ferromagnetic metal bilayers. This finding illustrates a crucial role of oxidation in the spin Hall effect, opening a route for engineering the spin-torque generator by oxygen control and manipulating magnetization without using heavy metals.

Recyclable Naturally Derived Magnetic Pyrrhotite for Elemental Mercury Recovery from Flue Gas.

Abstract: Magnetic pyrrhotite, derived from the thermal treatment of natural pyrite, was developed as a recyclable sorbent to recover elemental mercury (Hg0) from the flue gas as a cobenefit of wet electrostatic precipitators (WESP). The performance of naturally derived pyrrhotite for Hg0 capture from the flue gas was much better than those of other reported magnetic sorbents, for example Mn–Fe spinel and Mn–Fe–Ti spinel. The rate of pyrrhotite for gaseous Hg0 capture at 60 °C was 0.28 μg g min–1 and its capacity was 0.22 mg g–1 with the breakthrough threshold of 4%. After the magnetic separation from the mixture collected by the WESP, the spent pyrrhotite can be thermally regenerated for recycle. The experiment of 5 cycles of Hg0 capture and regeneration demonstrated that both the adsorption efficiency and the magnetization were not notably degraded. Meanwhile, the ultralow concentration of gaseous Hg0 in the flue gas was concentrated to high concentrations of gaseous Hg0 and Hg2+ during the regeneration process, ...

A review of high magnetic moment thin films for microscale and nanotechnology applications

Abstract: The creation of large magnetic fields is a necessary component in many technologies, ranging from magnetic resonance imaging, electric motors and generators, and magnetic hard disk drives in information storage. This is typically done by inserting a ferromagnetic pole piece with a large magnetisation density MS in a solenoid. In addition to large MS, it is usually required or desired that the ferromagnet is magnetically soft and has a Curie temperature well above the operating temperature of the device. A variety of ferromagnetic materials are currently in use, ranging from FeCo alloys in, for example, hard disk drives, to rare earth metals operating at cryogenic temperatures in superconducting solenoids. These latter can exceed the limit on MS for transition metal alloys given by the Slater-Pauling curve. This article reviews different materials and concepts in use or proposed for technological applications that require a large MS, with an emphasis on nanoscale material systems, such as thin and ultra-thin films. Attention is also paid to other requirements or properties, such as the Curie temperature and magnetic softness. In a final summary, we evaluate the actual applicability of the discussed materials for use as pole tips in electromagnets, in particular, in nanoscale magnetic hard disk drive read-write heads; the technological advancement of the latter has been a very strong driving force in the development of the field of nanomagnetism.

Ab Initio Theory of Coherent Laser-Induced Magnetization in Metals

Abstract: We present the first materials specific ab initio theory of the magnetization induced by circularly polarized laser light in metals. Our calculations are based on nonlinear density matrix theory an ...