Showing papers by "Edith Cowan University published in 2017"

The Impact of Exercise on Cancer Mortality, Recurrence, and Treatment-Related Adverse Effects

Abstract: The combination of an increasing number of new cancer cases and improving survival rates has led to a large and rapidly growing population with unique health-care requirements. Exercise has been proposed as a strategy to help address the issues faced by cancer patients. Supported by a growing body of research, major health organizations commonly identify the importance of incorporating exercise in cancer care and advise patients to be physically active. This systematic review comprehensively summarizes the available epidemiologic and randomized controlled trial evidence investigating the role of exercise in the management of cancer. Literature searches focused on determining the potential impact of exercise on 1) cancer mortality and recurrence and 2) adverse effects of cancer and its treatment. A total of 100 studies were reviewed involving thousands of individual patients whose exercise behavior was assessed following the diagnosis of any type of cancer. Compared with patients who performed no/less exercise, patients who exercised following a diagnosis of cancer were observed to have a lower relative risk of cancer mortality and recurrence and experienced fewer/less severe adverse effects. The findings of this review support the view that exercise is an important adjunct therapy in the management of cancer. Implications on cancer care policy and practice are discussed.

An insight into metal organic framework derived N-doped graphene for the oxidative degradation of persistent contaminants: formation mechanism and generation of singlet oxygen from peroxymonosulfate

Abstract: The synthesis of carbonaceous materials from a metal organic framework (MIL-100), organic linker and N-precursor was comprehensively investigated, and the structures of the products were characterized. It was found that simple pyrolysis of mixed MIL-100 (Fe)/dicyandiamide (DCDA) could produce nitrogen-doped graphene (N-graphene). The N-graphene showed excellent performances in peroxymonosulfate (PMS) activation, which were superior to those of counterparts of graphene, iron(II, III) oxide, manganese(IV) oxide and cobalt(II, III) oxide. With PMS activation, N-graphene exhibited efficient catalytic degradation of various organic pollutants such as phenol, 2,4,6-trichlorophenol (TCP), sulfachloropyridazine (SCP) and p-hydroxybenzoic acid (PHBA). Electron paramagnetic resonance (EPR) spectroscopy and radical quenching tests were employed to investigate the PMS activation and organic degradation processes. It was found that singlet oxygen (1O2) was mainly produced during the activation of PMS by N-graphene, and contributed to the catalytic oxidation instead of sulfate and/or hydroxyl radicals. These findings provide new insights into PMS activation by metal-free carbon catalysis.

Global patterns in mangrove soil carbon stocks and losses

Abstract: This research presents global baseline estimates of mangrove soil C stocks enabling countries to begin to assess their mangrove soil C stocks and the emissions that might arise from mangrove deforestation.

Muscle damage and inflammation during recovery from exercise.

Abstract: Unaccustomed exercise consisting of eccentric (i.e., lengthening) muscle contractions often results in muscle damage characterized by ultrastructural alterations in muscle tissue, clinical signs and symptoms (e.g., reduced muscle strength and range of motion, increased muscle soreness and swelling, efflux of myocellular proteins). The time course of recovery following exercise-induced muscle damage depends on the extent of initial muscle damage, which in turn is influenced by the intensity and duration of exercise, joint angle/muscle length and muscle groups used during exercise. The effects of these factors on muscle strength, soreness and swelling are well characterized. By contrast, much less is known about how they affect intramuscular inflammation and molecular aspects of muscle adaptation/remodeling. Although inflammation has historically been viewed as detrimental for recovery from exercise, it is now generally accepted that inflammatory responses-if tightly regulated-are integral to muscle repair and regeneration. Animal studies have revealed that other cell types including mast cells, eosinophils, CD8 and T regulatory lymphocytes, fibro-adipogenic progenitors and pericytes also help to facilitate muscle tissue regeneration. However, more research is required to determine whether these cells respond to exercise-induced muscle damage. A large body of research has investigated the efficacy of physicotherapeutic, pharmacological and nutritional interventions for reducing the signs and symptoms of exercise-induced muscle damage, with mixed results. More research is needed to examine if/how these treatments influence inflammation and muscle remodeling during recovery from exercise.

Ecosystem biomonitoring with eDNA: metabarcoding across the tree of life in a tropical marine environment

Abstract: Effective marine management requires comprehensive data on the status of marine biodiversity. However, efficient methods that can document biodiversity in our oceans are currently lacking. Environmental DNA (eDNA) sourced from seawater offers a new avenue for investigating the biota in marine ecosystems. Here, we investigated the potential of eDNA to inform on the breadth of biodiversity present in a tropical marine environment. Directly sequencing eDNA from seawater using a shotgun approach resulted in only 0.34% of 22.3 million reads assigning to eukaryotes, highlighting the inefficiency of this method for assessing eukaryotic diversity. In contrast, using ‘tree of life’ (ToL) metabarcoding and 20-fold fewer sequencing reads, we could detect 287 families across the major divisions of eukaryotes. Our data also show that the best performing ‘universal’ PCR assay recovered only 44% of the eukaryotes identified across all assays, highlighting the need for multiple metabarcoding assays to catalogue biodiversity. Lastly, focusing on the fish genus Lethrinus, we recovered intra- and inter-specific haplotypes from seawater samples, illustrating that eDNA can be used to explore diversity beyond taxon identifications. Given the sensitivity and low cost of eDNA metabarcoding we advocate this approach be rapidly integrated into biomonitoring programs.

Mechanical basis of bone strength: influence of bone material, bone structure and muscle action

Abstract: This review summarises current understanding of how bone is sculpted through adaptive processes, designed to meet the mechanical challenges it faces in everyday life and athletic pursuits, serving as an update for clinicians, researchers and physical therapists. Bone’s ability to resist fracture under the large muscle and locomotory forces it experiences during movement and in falls or collisions is dependent on its established mechanical properties, determined by bone’s complex and multidimensional material and structural organisation. At all levels, bone is highly adaptive to habitual loading, regulating its structure according to components of its loading regime and mechanical environment, inclusive of strain magnitude, rate, frequency, distribution and deformation mode. Indeed, the greatest forces habitually applied to bone arise from muscular contractions, and the past two decades have seen substantial advances in our understanding of how these forces shape bone throughout life. Herein, we also highlight the limitations of in vivo methods to assess and understand bone collagen, and bone mineral at the material or tissue level. The inability to easily measure or closely regulate applied strain in humans is identified, limiting the translation of animal studies to human populations, and our exploration of how components of mechanical loading regimes influence mechanoadaptation.

N-Doped Graphene from Metal–Organic Frameworks for Catalytic Oxidation of p-Hydroxylbenzoic Acid: N-Functionality and Mechanism

Abstract: N-doped graphene has been considered as a promising catalyst with surface metal-free active sites for environmental remediation. Several MIL-100 (Fe)-templated N-doped graphene samples were synthesized using dicyandiamide, melamine, and urea as the nitrogen precursors. Excellent catalytic oxidation of p-hydroxylbenzoic acid (PHBA) was observed on the as-synthesized samples via peroxymonosulfate (PMS) activation. The mechanism was investigated by both electron paramagnetic resonance (EPR, 5,5-dimethyl-1-pyrroline N-oxide and 2,2,6,6-tetramethyl-4-piperidinol as the trapping agents) and quenching tests (ethanol and sodium azide as the radical scavengers). Benzoic acid and furfuryl alcohol were also employed as probing reagents for hydroxyl/sulfate radicals and singlet oxygen, respectively. The results confirmed that singlet oxygen was generated and dominated the PHBA degradation on N-doped graphene, rather than hydroxyl/sulfate radicals. With the novel N-doped graphene, this study illustrates the formation ...

Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting

Abstract: Ti and Ti-TiB composite materials were produced by selective laser melting (SLM). Ti showed an α΄ microstructure, whereas the Ti-TiB composite revealed a distribution of needle-like TiB particles across an α-Ti matrix. Hardness (H) and reduced elastic modulus (Er) were investigated by nanoindentation using loads of 2, 5 and 10 mN. The results showed higher H and Er values for the Ti-TiB than Ti due to the hardening and stiffening effects of the TiB reinforcements. On increasing the nanoindentation load, H and Er were decreased. Comparison of the nanoindentation results with those derived from conventional hardness and compression tests indicated that 5 mN is the most suitable nanoindentation load to assess the elastic modulus and hardness properties. The wear resistance of the samples was related to their corresponding H/Er and H3/Er2 ratios obtained by nanoindentation. These investigations showed that there is a high degree of consistency between the characterization using nanoindentation and the wear evaluation from conventional wear tests.

Blood-based biomarkers in Alzheimer disease: Current state of the science and a novel collaborative paradigm for advancing from discovery to clinic.

Abstract: The last decade has seen a substantial increase in research focused on the identification of blood-based biomarkers that have utility in Alzheimer's disease (AD). Blood-based biomarkers have significant advantages of being time- and cost-efficient as well as reduced invasiveness and increased patient acceptance. Despite these advantages and increased research efforts, the field has been hampered by lack of reproducibility and an unclear path for moving basic discovery toward clinical utilization. Here we reviewed the recent literature on blood-based biomarkers in AD to provide a current state of the art. In addition, a collaborative model is proposed that leverages academic and industry strengths to facilitate the field in moving past discovery only work and toward clinical use. Key resources are provided. This new public-private partnership model is intended to circumvent the traditional handoff model and provide a clear and useful paradigm for the advancement of biomarker science in AD and other neurodegenerative diseases.

Fukushima Daiichi–Derived Radionuclides in the Ocean: Transport, Fate, and Impacts

Abstract: The events that followed the Tohoku earthquake and tsunami on March 11, 2011, included the loss of power and overheating at the Fukushima Daiichi nuclear power plants, which led to extensive releases of radioactive gases, volatiles, and liquids, particularly to the coastal ocean. The fate of these radionuclides depends in large part on their oceanic geochemistry, physical processes, and biological uptake. Whereas radioactivity on land can be resampled and its distribution mapped, releases to the marine environment are harder to characterize owing to variability in ocean currents and the general challenges of sampling at sea. Five years later, it is appropriate to review what happened in terms of the sources, transport, and fate of these radionuclides in the ocean. In addition to the oceanic behavior of these contaminants, this review considers the potential health effects and societal impacts.

Chronic Adaptations to Eccentric Training: A Systematic Review

Abstract: Resistance training is an integral component of physical preparation for athletes. A growing body of evidence indicates that eccentric strength training methods induce novel stimuli for neuromuscular adaptations. The purpose of this systematic review was to determine the effects of eccentric training in comparison to concentric-only or traditional (i.e. constrained by concentric strength) resistance training. Searches were performed using the electronic databases MEDLINE via EBSCO, PubMed and SPORTDiscus via EBSCO. Full journal articles investigating the long-term (≥4 weeks) effects of eccentric training in healthy (absence of injury or illness during the 4 weeks preceding the training intervention), adult (17–35 years), human participants were selected for the systematic review. A total of 40 studies conformed to these criteria. Eccentric training elicits greater improvements in muscle strength, although in a largely mode-specific manner. Superior enhancements in power and stretch-shortening cycle (SSC) function have also been reported. Eccentric training is at least as effective as other modalities in increasing muscle cross-sectional area (CSA), while the pattern of hypertrophy appears nuanced and increased CSA may occur longitudinally within muscle (i.e. the addition of sarcomeres in series). There appears to be a preferential increase in the size of type II muscle fibres and the potential to exert a unique effect upon fibre type transitions. Qualitative and quantitative changes in tendon tissue that may be related to the magnitude of strain imposed have also been reported with eccentric training. Eccentric training is a potent stimulus for enhancements in muscle mechanical function, and muscle-tendon unit (MTU) morphological and architectural adaptations. The inclusion of eccentric loads not constrained by concentric strength appears to be superior to traditional resistance training in improving variables associated with strength, power and speed performance.

Sustainable third-party reverse logistic provider selection with fuzzy SWARA and fuzzy MOORA in plastic industry

Abstract: Third-party logistic provider (3PLP) companies play a major role in supply chain management (SCM) by carrying out specialized functions—namely, integrated operation, warehousing, and transportation services. Taking sustainability issues into consideration makes reverse logistics even more significant. In this paper, a combination of sustainability and risk factors was considered for third-party reverse logistic provider (3PRLP) evaluation. Initially, fuzzy step-wise weight assessment ratio analysis (Fuzzy SWARA) was applied for weighing the evaluation criteria; then, Fuzzy multi-objective optimization on the basis of ratio analysis (Fuzzy MOORA) was utilized for ranking the sustainable third-party reverse logistic providers in the plastic industry in the second step. Findings highlight that quality, recycling, health, and safety were the most important criteria in economic, environmental, and social dimensions of sustainability, respectively. Also, operational risk was found to have the highest weight among risk factors.

Mechanisms and mediators of the skeletal muscle repeated bout effect

Abstract: Skeletal muscle adapts to exercise-induced damage by orchestrating several but still poorly understood mechanisms that endow protection from subsequent damage Known widely as the repeated bout effect, we propose that neural adaptations, alterations to muscle mechanical properties, structural remodeling of the extracellular matrix, and biochemical signaling work in concert to coordinate the protective adaptation

Ferric carbide nanocrystals encapsulated in nitrogen-doped carbon nanotubes as an outstanding environmental catalyst

Abstract: Nitrogen-doped carbon nanotubes encapsulating iron carbide (Fe3C) nanocrystals (Fe3C@NCNT) were fabricated by a simple and direct pyrolysis method using melamine and ferric chloride as the C, N and Fe precursors. The surface morphology, structure and composition of the Fe3C@NCNT materials were thoroughly investigated. The nanomaterials were employed as novel catalysts for peroxymonosulfate (PMS) activation; outstanding efficiency, high stability and excellent reusability were observed in the catalytic oxidation of organics. The encapsulated Fe3C nanoparticles played a key role in the emerging synergetic effects of the carbide and the protective graphitic layers. In addition, the quaternary N and trace amounts of iron on the CNT surface acted as the active sites. Various quenching experiments were carried out to elucidate the catalytic mechanism of Fe3C@NCNT. It was found that singlet oxygen, superoxide, sulfate and hydroxyl radicals worked together to degrade phenol solutions. Due to their simple synthesis method, low-cost precursors, unique structure and excellent catalytic activity and stability, these novel iron-carbide-based composites have great potential as new strategic materials for environmental catalysis.

Comparative study of commercially pure titanium produced by laser engineered net shaping, selective laser melting and casting processes

Abstract: Commercially pure titanium was produced using laser engineered net shaping (LENS) and selective laser melting (SLM) processes. The SLM and LENS processing parameters as well as critical aspects including densification and balling effect were investigated. The resulting properties were studied and compared with those from traditional casting. Investigation of the processing parameters showed that significantly higher laser power and energy density is required in LENS compared to SLM in order to obtain near full density (99.5%). The microstructural investigations revealed an α microstructure with mixed morphologies including plate-like and widmanstatten for LENS somewhat similar to the serrated and fine acicular α obtained from casting. In contrast, the SLM samples showed only martensitic α′ phase mainly with a lath-type morphology. The difference between SLM and LENS microstructures was discussed based on interrelated aspects including energy density, solidification rate and specific point energy. Differences in their microstructures are mainly associated with differing rates of cooling and differing energy densities during SLM and LENS processing. Compression and hardness tests indicated that SLM titanium possesses better mechanical properties due to a fine grain size and martensitic phase composition, whereas LENS and cast titanium with α microstructures show similar mechanical properties.

Surface aging behaviour of Fe-based amorphous alloys as catalysts during heterogeneous photo Fenton-like process for water treatment

Abstract: Two novel, multifunctional Fe-based amorphous alloys with the nominal components of Fe78Si9B13 and Fe73.5Si13.5B9Cu1Nb3 exhibit advanced catalytic capability when degrading methyl blue (MB) and methyl orange (MO) dyes. The production rate of hydroxyl radicals ( OH) in this work is 5–10 times faster than other Fe-based catalysts. The surface aging behaviour on Fe78Si9B13 and Fe73.5Si13.5B9Cu1Nb3 ribbons shows a significant effect on the dye degradation efficiency and reusability of the catalyst. Results reveal that crystallized α-Fe, iron oxide and SiO2 are gradually precipitated on the surface of the reused Fe78Si9B13 ribbon which ultimately becomes corroded through with holes. However, the inclusion of Nb atoms in the Fe73.5Si13.5B9Cu1Nb3 alloy causes the formation of niobium oxides which overlay the ribbon surface, and tend to reduce the contact area between the Fe and H2O2, thereby decreasing the generation of OH and further reducing the dye degradation efficiency. Tert-butanol is employed for quenching hydroxyl radicals ( OH), causing a dramatic reduction in the amount available for degrading the MB and MO molecules. The MB and MO dye degradation and mineralization under UV–vis light are also fully investigated. The findings of this critically important work should form the basis of new research opportunities into the study of amorphous alloy catalysis.