Institution
King Abdullah University of Science and Technology
Education•Jeddah, Saudi Arabia•
About: King Abdullah University of Science and Technology is a education organization based out in Jeddah, Saudi Arabia. It is known for research contribution in the topics: Catalysis & Membrane. The organization has 6221 authors who have published 22019 publications receiving 625706 citations. The organization is also known as: KAUST.
Topics: Catalysis, Membrane, Computer science, Fading, Population
Papers published on a yearly basis
Papers
More filters
••
TL;DR: In this paper, the first experimental evidence of out-of-plane piezoelectricity and ferroelectricity in van der Waals layered α-In2Se3 nanoflakes was reported.
Abstract: Piezoelectric and ferroelectric properties in the two-dimensional (2D) limit are highly desired for nanoelectronic, electromechanical, and optoelectronic applications. Here we report the first experimental evidence of out-of-plane piezoelectricity and ferroelectricity in van der Waals layered α-In2Se3 nanoflakes. The noncentrosymmetric R3m symmetry of the α-In2Se3 samples is confirmed by scanning transmission electron microscopy, second-harmonic generation, and Raman spectroscopy measurements. Domains with opposite polarizations are visualized by piezo-response force microscopy. Single-point poling experiments suggest that the polarization is potentially switchable for α-In2Se3 nanoflakes with thicknesses down to ∼10 nm. The piezotronic effect is demonstrated in two-terminal devices, where the Schottky barrier can be modulated by the strain-induced piezopotential. Our work on polar α-In2Se3, one of the model 2D piezoelectrics and ferroelectrics with simple crystal structures, shows its great potential in electronic and photonic applications.
475 citations
••
Ludwig Maximilian University of Munich1, University of Cambridge2, University of Hyderabad3, Katholieke Universiteit Leuven4, Massachusetts Institute of Technology5, University of Antwerp6, Indian Institute of Science7, Yantai University8, University of Vigo9, King Abdullah University of Science and Technology10, Nanjing University of Science and Technology11, Lawrence Berkeley National Laboratory12, University of California, Berkeley13, Nanyang Technological University14, Soochow University (Suzhou)15, Technische Universität München16, ETH Zurich17, Lund University18, Hokkaido University19, Chinese Academy of Sciences20, University of California, Santa Cruz21, Beijing Institute of Technology22, City University of Hong Kong23, University of Texas at Austin24, Indian Association for the Cultivation of Science25, San Diego State University26, University of Washington27, Texas A&M University28, Bilkent University29, James I University30, Max Planck Society31, National Renewable Energy Laboratory32, University of Valencia33, Shanghai Jiao Tong University34, Istituto Italiano di Tecnologia35, Swiss Federal Laboratories for Materials Science and Technology36, University of Notre Dame37, Monash University, Clayton campus38, Imperial College London39
TL;DR: A comprehensive review of metal-halide perovskite nanocrystals can be found in this article, where researchers having expertise in different fields (chemistry, physics, and device engineering) have joined together to provide a state-of-the-art overview and future prospects of metalhalide nanocrystal research.
Abstract: Metal-halide perovskites have rapidly emerged as one of the most promising materials of the 21st century, with many exciting properties and great potential for a broad range of applications, from photovoltaics to optoelectronics and photocatalysis. The ease with which metal-halide perovskites can be synthesized in the form of brightly luminescent colloidal nanocrystals, as well as their tunable and intriguing optical and electronic properties, has attracted researchers from different disciplines of science and technology. In the last few years, there has been a significant progress in the shape-controlled synthesis of perovskite nanocrystals and understanding of their properties and applications. In this comprehensive review, researchers having expertise in different fields (chemistry, physics, and device engineering) of metal-halide perovskite nanocrystals have joined together to provide a state of the art overview and future prospects of metal-halide perovskite nanocrystal research.
471 citations
••
TL;DR: Topological texture on superhydrophobic materials is critical in stabilizing the vapour layer and thus in controlling—by heat transfer—the liquid–gas phase transition at hot surfaces, and can potentially be applied to control other phase transitions.
Abstract: Textured superhydrophobic surfaces—well known for their water-repelling properties—can be used to control the boiling state of a liquid in contact with a hot surface, suppressing the unwanted nucleation of bubbles. Textured superhydrophobic surfaces are well known and suitably named for their water-repelling properties. Ivan Vakarelski et al. show here that such surfaces can be used to control a very different property — the boiling state of a liquid in contact with a hot surface. They find that the hot surface can be engineered such that the system remains in the 'Leidenfrost' regime, whereby boiling takes place only in a continuous vapour film at the hot surface, rather than going through the familiar 'nucleate boiling' bubbling phase. The complete suppression of nucleate boiling could be advantageous in industrial situations in which vapour explosions are best avoided — in nuclear power plants, for instance. Textured, water-repelling surfaces might also be used to control or prevent other phase transitions, such as ice or frost formation. In 1756, Leidenfrost1 observed that water drops skittered on a sufficiently hot skillet, owing to levitation by an evaporative vapour film. Such films are stable only when the hot surface is above a critical temperature, and are a central phenomenon in boiling2. In this so-called Leidenfrost regime, the low thermal conductivity of the vapour layer inhibits heat transfer between the hot surface and the liquid. When the temperature of the cooling surface drops below the critical temperature, the vapour film collapses and the system enters a nucleate-boiling regime, which can result in vapour explosions that are particularly detrimental in certain contexts, such as in nuclear power plants3. The presence of these vapour films can also reduce liquid–solid drag4,5,6. Here we show how vapour film collapse can be completely suppressed at textured superhydrophobic surfaces. At a smooth hydrophobic surface, the vapour film still collapses on cooling, albeit at a reduced critical temperature, and the system switches explosively to nucleate boiling. In contrast, at textured, superhydrophobic surfaces, the vapour layer gradually relaxes until the surface is completely cooled, without exhibiting a nucleate-boiling phase. This result demonstrates that topological texture on superhydrophobic materials is critical in stabilizing the vapour layer and thus in controlling—by heat transfer—the liquid–gas phase transition at hot surfaces. This concept can potentially be applied to control other phase transitions, such as ice or frost formation7,8,9, and to the design of low-drag surfaces at which the vapour phase is stabilized in the grooves of textures without heating10.
469 citations
••
TL;DR: This work proposes and analyzes a stochastic collocation method for solving elliptic partial differential equations with random coefficients and forcing terms and provides a rigorous convergence analysis and demonstrates exponential convergence of the “probability error” with respect to the number of Gauss points in each direction of the probability space.
Abstract: This work proposes and analyzes a stochastic collocation method for solving elliptic partial differential equations with random coefficients and forcing terms. These input data are assumed to depend on a finite number of random variables. The method consists of a Galerkin approximation in space and a collocation in the zeros of suitable tensor product orthogonal polynomials (Gauss points) in the probability space, and naturally leads to the solution of uncoupled deterministic problems as in the Monte Carlo approach. It treats easily a wide range of situations, such as input data that depend nonlinearly on the random variables, diffusivity coefficients with unbounded second moments, and random variables that are correlated or even unbounded. We provide a rigorous convergence analysis and demonstrate exponential convergence of the “probability error” with respect to the number of Gauss points in each direction of the probability space, under some regularity assumptions on the random input data. Numerical examples show the effectiveness of the method. Finally, we include a section with developments posterior to the original publication of this work. There we review sparse grid stochastic collocation methods, which are effective collocation strategies for problems that depend on a moderately large number of random variables.
468 citations
••
TL;DR: The achieved PCE is the highest reported to date for organic solar cells comprised of 2D charge transport interlayers and highlights the potential of TMDs as inexpensive HTLs for high-efficiency organic photovoltaics.
Abstract: The application of liquid-exfoliated 2D transition metal disulfides (TMDs) as the hole transport layers (HTLs) in nonfullerene-based organic solar cells is reported. It is shown that solution processing of few-layer WS2 or MoS2 suspensions directly onto transparent indium tin oxide (ITO) electrodes changes their work function without the need for any further treatment. HTLs comprising WS2 are found to exhibit higher uniformity on ITO than those of MoS2 and consistently yield solar cells with superior power conversion efficiency (PCE), improved fill factor (FF), enhanced short-circuit current (JSC ), and lower series resistance than devices based on poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) and MoS2 . Cells based on the ternary bulk-heterojunction PBDB-T-2F:Y6:PC71 BM with WS2 as the HTL exhibit the highest PCE of 17%, with an FF of 78%, open-circuit voltage of 0.84 V, and a JSC of 26 mA cm-2 . Analysis of the cells' optical and carrier recombination characteristics indicates that the enhanced performance is most likely attributed to a combination of favorable photonic structure and reduced bimolecular recombination losses in WS2 -based cells. The achieved PCE is the highest reported to date for organic solar cells comprised of 2D charge transport interlayers and highlights the potential of TMDs as inexpensive HTLs for high-efficiency organic photovoltaics.
467 citations
Authors
Showing all 6430 results
Name | H-index | Papers | Citations |
---|---|---|---|
Jian-Kang Zhu | 161 | 550 | 105551 |
Jean M. J. Fréchet | 154 | 726 | 90295 |
Kevin Murphy | 146 | 728 | 120475 |
Jean-Luc Brédas | 134 | 1026 | 85803 |
Carlos M. Duarte | 132 | 1173 | 86672 |
Kazunari Domen | 130 | 908 | 77964 |
Jian Zhou | 128 | 3007 | 91402 |
Tai-Shung Chung | 119 | 879 | 54067 |
Donal D. C. Bradley | 115 | 652 | 65837 |
Lain-Jong Li | 113 | 627 | 58035 |
Hong Wang | 110 | 1633 | 51811 |
Peng Wang | 108 | 1672 | 54529 |
Juan Bisquert | 107 | 450 | 46267 |
Jian Zhang | 107 | 3064 | 69715 |
Karl Leo | 104 | 832 | 42575 |