Showing papers by "Wuhan University of Technology published in 2015"

Polymeric Photocatalysts Based on Graphitic Carbon Nitride

Abstract: Semiconductor-based photocatalysis is considered to be an attractive way for solving the worldwide energy shortage and environmental pollution issues. Since the pioneering work in 2009 on graphitic carbon nitride (g-C3N4) for visible-light photocatalytic water splitting, g-C3N4 -based photocatalysis has become a very hot research topic. This review summarizes the recent progress regarding the design and preparation of g-C3N4 -based photocatalysts, including the fabrication and nanostructure design of pristine g-C3N4 , bandgap engineering through atomic-level doping and molecular-level modification, and the preparation of g-C3N4 -based semiconductor composites. Also, the photo-catalytic applications of g-C3N4 -based photocatalysts in the fields of water splitting, CO2 reduction, pollutant degradation, organic syntheses, and bacterial disinfection are reviewed, with emphasis on photocatalysis promoted by carbon materials, non-noble-metal cocatalysts, and Z-scheme heterojunctions. Finally, the concluding remarks are presented and some perspectives regarding the future development of g-C3N4 -based photocatalysts are highlighted.

Engineering heterogeneous semiconductors for solar water splitting

Abstract: There is a growing interest in the conversion of water and solar energy into clean and renewable H2 fuels using earth-abundant materials due to the depletion of fossil fuel and its serious environmental impact. This critical review highlights some key factors influencing the efficiency of heterogeneous semiconductors for solar water splitting (i.e. improved charge separation and transfer, promoted optical absorption, optimized band gap position, lowered cost and toxicity, and enhanced stability and water splitting kinetics). Moreover, different engineering strategies, such as band structure engineering, micro/nano engineering, bionic engineering, co-catalyst engineering, surface/interface engineering of heterogeneous semiconductors are summarized and discussed thoroughly. The synergistic effects of the different engineering strategies, especially for the combination of co-catalyst loading and other strategies seem to be more promising for the development of highly efficient photocatalysts. A thorough understanding of electron and hole transfer thermodynamics and kinetics at the fundamental level is also important for elucidating the key efficiency-limiting step and designing highly efficient solar-to-fuel conversion systems. In this review, we provide not only a summary of the recent progress in the different engineering strategies of heterogeneous semiconductors for solar water splitting, but also some potential opportunities for designing and optimizing solar cells, photocatalysts for the reduction of CO2 and pollutant degradation, and electrocatalysts for water splitting.

Metal–organic frameworks: versatile heterogeneous catalysts for efficient catalytic organic transformations

Abstract: Novel catalytic materials are highly demanded to perform a variety of catalytic organic reactions. MOFs combine the benefits of heterogeneous catalysis like easy post reaction separation, catalyst reusability, high stability and homogeneous catalysis such as high efficiency, selectivity, controllability and mild reaction conditions. The possible organization of active centers like metallic nodes, organic linkers, and their chemical synthetic functionalization on the nanoscale shows potential to build up MOFs particularly modified for catalytic challenges. In this review, we have summarized the recent research progress in heterogeneous catalysis by MOFs and their catalytic behavior in various organic reactions, highlighting the key features of MOFs as catalysts based on the active sites in the framework. Examples of their post functionalization, inclusion of active guest species and metal nanoparticles have been discussed. Finally, the use of MOFs as catalysts for asymmetric heterogeneous catalysis and stability of MOFs has been presented as separate sections.

Sulfur-doped g-C3N4 with enhanced photocatalytic CO2-reduction performance

Abstract: Graphitic carbon nitride (g-C 3 N 4 ) is the most stable phase of all carbon nitride allotropes under ambient conditions. In this study, sulfur-doped g-C 3 N 4 was fabricated by simply calcinating thiourea at 520 °C. Sulfur-doped g-C 3 N 4 (TCN) was found to absorb light up to 475 nm corresponding to a band gap of 2.63 eV, which was narrower than that of un-doped g-C 3 N 4 (MCN) with a band gap of 2.7 eV. First-principle calculations based on spin-polarized density functional theory were utilized to investigate the theoretical partial density of states of the TCN and MCN, indicating that the band gaps of TCN and MCN were the same, but impurities existed in the TCN sample. Consequently, photogenerated electrons could easily jump from the impurity state to the conduction band or from the valence band to the impurity state. Photocatalytic CO 2 reduction was further used to evaluate the photoactivity of samples, and the CH 3 OH yield using TCN and MCN were 1.12 and 0.81 μmol g −1 , respectively. PL spectrum analysis and transient photocurrent responses were also carried out to verify the suggested photocatalysis mechanism.

Na + intercalation pseudocapacitance in graphene-coupled titanium oxide enabling ultra-fast sodium storage and long-term cycling

Abstract: Sodium-ion batteries are emerging as a highly promising technology for large-scale energy storage applications. However, it remains a significant challenge to develop an anode with superior long-term cycling stability and high-rate capability. Here we demonstrate that the Na(+) intercalation pseudocapacitance in TiO2/graphene nanocomposites enables high-rate capability and long cycle life in a sodium-ion battery. This hybrid electrode exhibits a specific capacity of above 90 mA h g(-1) at 12,000 mA g(-1) (∼36 C). The capacity is highly reversible for more than 4,000 cycles, the longest demonstrated cyclability to date. First-principle calculations demonstrate that the intimate integration of graphene with TiO2 reduces the diffusion energy barrier, thus enhancing the Na(+) intercalation pseudocapacitive process. The Na-ion intercalation pseudocapacitance enabled by tailor-deigned nanostructures represents a promising strategy for developing electrode materials with high power density and long cycle life.

CdS/Graphene Nanocomposite Photocatalysts

Abstract: Heterogeneous photocatalysis using semiconductors and renewable solar energy has been regarded as one of the most promising processes to alleviate, and even solve, both the world crises of energy supply and environmental pollution. In the past few years, many encouraging achievements have been made in the research area of graphene-based semiconductor photocatalysts. Among them, CdS/graphene nanocomposites have attracted extensive attention as an important kind of photocatalyst in chemical and material science, due to its superior photocatalytic activity and photostability under visible-light irradiation. The aim here is to address the enhancement mechanism of the photocatalytic performance of CdS/graphene composite photocatalysts, and systematically summarize recent progress regarding the design and synthesis of CdS/graphene nanocomposites. These nanocomposites are promising for a great diversity of applications in visible-light photocatalytic fields, including artificial photosynthetic systems (photocatalytic hydrogen production and CO2 reduction), environmental remediation, and organic photosynthesis. Special attention is given to the photocatalytic hydrogen production and pollutant photodegradation over CdS/graphene nanocomposite photocatalysts. Furthermore, perspectives on CdS/graphene-based materials are discussed, including the various remaining challenges for large-scale applications, identifying prospective areas for related research in this field.

Graphene‐Based Photocatalysts for Solar‐Fuel Generation

Abstract: The production of solar fuel through photocatalytic water splitting and CO2 reduction using photocatalysts has attracted considerable attention owing to the global energy shortage and growing environmental problems. During the past few years, many studies have demonstrated that graphene can markedly enhance the efficiency of photocatalysts for solar-fuel generation because of its unique 2D conjugated structure and electronic properties. Herein we summarize the recent advances in the application of graphene-based photocatalysts for solar-fuel production, including CO2 reduction to hydrocarbon fuel and water splitting to H2. A brief overview of the fundamental principles for splitting of water and reduction of CO2 is given. The different roles of graphene in these graphene-based photocatalysts for improving photocatalytic performance are discussed. Finally, the perspectives on the challenges and opportunities for future research in this promising area are also presented.

A Hierarchical Z-Scheme CdS-WO3 Photocatalyst with Enhanced CO2 Reduction Activity

Abstract: The development of an artificial photosynthetic system is a promising strategy to convert solar energy into chemical fuels. Here, a direct Z-scheme CdS-WO(3) photocatalyst without an electron mediator is fabricated by imitating natural photosynthesis of green plants. Photocatalytic activities of as-prepared samples are evaluated on the basis of photocatalytic CO(2) reduction to form CH(4) under visible light irradiation. These Z-scheme-heterostructured samples show a higher photocatalytic CO(2) reduction than single-phase photocatalysts. An optimized CdS-WO(3) heterostructure sample exhibits the highest CH(4) production rate of 1.02 μmol h(-1) g(-1) with 5 mol% CdS content, which exceeds the rates observed in single-phase WO(3) and CdS samples for approximately 100 and ten times under the same reaction condition, respectively. The enhanced photocatalytic activity could be attributed to the formation of a hierarchical direct Z-scheme CdS-WO(3) photocatalyst, resulting in an efficient spatial separation of photo-induced electron-hole pairs. Reduction and oxidation catalytic centers are maintained in two different regions to minimize undesirable back reactions of the photocatalytic products. The introduction of CdS can enhance CO(2) molecule adsorption, thereby accelerating photocatalytic CO(2) reduction to CH(4). This study provides novel insights into the design and fabrication of high-performance artificial Z-scheme photocatalysts to perform photocatalytic CO(2) reduction.

Convergence of multi-valley bands as the electronic origin of high thermoelectric performance in CoSb3 skutterudites.

Abstract: Filled skutterudites R_xCo_4Sb_(12) are excellent n-type thermoelectric materials owing to their high electronic mobility and high effective mass, combined with low thermal conductivity associated with the addition of filler atoms into the void site. The favourable electronic band structure in n-type CoSb3 is typically attributed to threefold degeneracy at the conduction band minimum accompanied by linear band behaviour at higher carrier concentrations, which is thought to be related to the increase in effective mass as the doping level increases. Using combined experimental and computational studies, we show instead that a secondary conduction band with 12 conducting carrier pockets (which converges with the primary band at high temperatures) is responsible for the extraordinary thermoelectric performance of n-type CoSb_3 skutterudites. A theoretical explanation is also provided as to why the linear (or Kane-type) band feature is not beneficial for thermoelectrics.

Solution-processed ferroelectric terpolymer nanocomposites with high breakdown strength and energy density utilizing boron nitride nanosheets

Abstract: The development of high-performance capacitive energy storage devices is of critical importance to address an ever-increasing electricity need. The energy density of a film capacitor is determined by the dielectric constant and breakdown strength of dielectric materials. With the highest dielectric constant among the known polymers, poly(vinylidene fluoride)-based ferroelectric terpolymers are of great potential for high energy density capacitors. However, their energy storage capability has long been limited by the relatively low breakdown strength. Here we demonstrate remarkable improvements in the energy density and charge–discharge efficiency of the ferroelectric terpolymers upon the incorporation of ultra-thin boron nitride nanosheets (BNNSs). It is found that BNNSs function as a robust scaffold to hamper the onset of electromechanical failure and simultaneously as an efficient insulating barrier against electrical conduction in the resulting polymer nanocomposites, resulting in greatly enhanced breakdown strength. Of particular note is the improved thermal conductivity of the terpolymer with the introduction of BNNSs; this is anticipated to benefit the stability and lifetime of polymer capacitors. This work establishes a facile, yet efficient approach to solution-processable dielectric materials with performance comparable or even superior to those achieved in the traditionally melt-extruded ultra-thin films.

Enhanced photocatalytic activity and stability of Z-scheme Ag2CrO4-GO composite photocatalysts for organic pollutant degradation

Abstract: Silver chromate-graphene oxide (Ag2CrO4-GO) composites are prepared by a facile precipitation method. The resulting Ag2CrO4-GO composites exhibit excellent photocatalytic activity and stability towards the degradation of the dyes and phenol in aqueous solution under visible-light irradiation. The optimal composite with 1.0 wt% GO content shows the highest photocatalytic activity for methylene blue (MB) degradation, which is 3.5 times that of pure Ag2CrO4 particles. The enhanced photocatalytic activity is mainly attributed to the formation of Ag2CrO4-GO Z-scheme heterojunction that can not only facilitate the separation and transfer of the photogenerated charge carriers, but also preserve a strong oxidation and reduction ability. The high photocatalytic stability is due to the successful inhibition of the photocorrosion of Ag2CrO4 by transferring the photogenerated electrons of Ag2CrO4 to GO. The present work provides a new understanding into design and fabrication of the GO/silver compound composite photocatalysts.

Carbon-Stabilized High-Capacity Ferroferric Oxide Nanorod Array for Flexible Solid-State Alkaline Battery–Supercapacitor Hybrid Device with High Environmental Suitability

Abstract: Iron oxides are promising to be utilized in rechargeable alkaline battery with high capacity upon complete redox reaction (Fe3+ Fe0). However, their practical application has been hampered by the poor structural stability during cycling, presenting a challenge that is particularly huge when binder-free electrode is employed. This paper proposes a “carbon shell-protection” solution and reports on a ferroferric oxide–carbon (Fe3O4–C) binder-free nanorod array anode exhibiting much improved cyclic stability (from only hundreds of times to >5000 times), excellent rate performance, and a high capacity of ≈7776.36 C cm−3 (≈0.4278 C cm−2; 247.5 mAh g−1, 71.4% of the theoretical value) in alkaline electrolyte. Furthermore, by pairing with a capacitive carbon nanotubes (CNTs) film cathode, a unique flexible solid-state rechargeable alkaline battery-supercapacitor hybrid device (≈360 μm thickness) is assembled. It delivers high energy and power densities (1.56 mWh cm−3; 0.48 W cm−3/≈4.8 s charging), surpassing many recently reported flexible supercapacitors. The highest energy density value even approaches that of Li thin-film batteries and is about several times that of the commercial 5.5 V/100 mF supercapacitor. In particular, the hybrid device still maintains good electrochemical attributes in cases of substantially bending, high mechanical pressure, and elevated temperature (up to 80 °C), demonstrating high environmental suitability.

Advanced Ti-Doped Fe2O3@PEDOT Core/Shell Anode for High-Energy Asymmetric Supercapacitors

Abstract: Y. X. Zeng, Y. Han, Y. T. Zhao, M. H. Yu, Y. J. Liu, Prof. Y. X. Tong, Dr. X. H. Lu MOE of the Key Laboratory of Bioinorganic and Synthetic Chemistry KLGHEI of Environment and Energy Chemistry School of Chemistry and Chemical Engineering Sun Yat-Sen University Guangzhou 510275 , P. R. China E-mail: luxh6@mail.sysu.edu.cn Y. Zeng, Prof. H. L. Tang State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan 430070 , P. R. China E-mail: thln@whut.edu.cn

GWmodel: An R Package for Exploring Spatial Heterogeneity Using Geographically Weighted Models

Abstract: Spatial statistics is a growing discipline providing important analytical techniques in a wide range of disciplines in the natural and social sciences. In the R package GWmodel we present techniques from a particular branch of spatial statistics, termed geographically weighted (GW) models. GW models suit situations when data are not described well by some global model, but where there are spatial regions where a suitably localized calibration provides a better description. The approach uses a moving window weighting technique, where localized models are found at target locations. Outputs are mapped to provide a useful exploratory tool into the nature of the data spatial heterogeneity. Currently, GWmodel includes functions for: GW summary statistics, GW principal components analysis, GW regression, and GW discriminant analysis; some of which are provided in basic and robust forms.

Semiconductor-based photocatalytic CO2 conversion

Abstract: Climate change and its impact on the Earth and Society has been recently reassessed by the International Panel on Climate Change. The panel estimates that the greenhouse gas emissions should be reduced by half by 2030 to mitigate climate change. Photocatalytic CO2 conversion is one of the promising technologies that can help with this modest goal. This review discusses the theoretical and practical aspects of CO2 conversion over semiconducting photocatalysts and overviews the recently reported CO2 conversion photocatalysts. A spectrum of photocatalysts reviewed in this work includes titania and its composites with metal oxides, metals, and advanced carbon allotropes; other solid photocatalysts, mostly based on germanium, gallium, tungsten, and niobium; graphitic carbon nitride; silver–silver halide plasmonic systems; photocatalytically active metal–organic frameworks; and graphene-based systems. Finally, a summary of the current state and an outlook for the future are provided.

General synthesis of complex nanotubes by gradient electrospinning and controlled pyrolysis

Abstract: Nanowires and nanotubes have been the focus of considerable efforts in energy storage and solar energy conversion because of their unique properties. However, owing to the limitations of synthetic methods, most inorganic nanotubes, especially for multi-element oxides and binary-metal oxides, have been rarely fabricated. Here we design a gradient electrospinning and controlled pyrolysis method to synthesize various controllable 1D nanostructures, including mesoporous nanotubes, pea-like nanotubes and continuous nanowires. The key point of this method is the gradient distribution of low-/middle-/high-molecular-weight poly(vinyl alcohol) during the electrospinning process. This simple technique is extended to various inorganic multi-element oxides, binary-metal oxides and single-metal oxides. Among them, Li3V2(PO4)3, Na0.7Fe0.7Mn0.3O2 and Co3O4 mesoporous nanotubes exhibit ultrastable electrochemical performance when used in lithium-ion batteries, sodium-ion batteries and supercapacitors, respectively. We believe that a wide range of new materials available from our composition gradient electrospinning and pyrolysis methodology may lead to further developments in research on 1D systems.

Graphene-Based Photocatalysts for CO2 Reduction to Solar Fuel.

Abstract: Recently, photocatalytic CO2 reduction for solar fuel production has attracted much attention because of its potential for simultaneously solving energy and global warming problems. Many studies have been conducted to prepare novel and efficient photocatalysts for CO2 reduction. Graphene, a two-dimensional material, has been increasingly used in photocatalytic CO2 reduction. In theory, graphene shows several remarkable properties, including excellent electronic conductivity, good optical transmittance, large specific surface area, and superior chemical stability. Attributing to these advantages, fabrication of graphene-based materials has been known as one of the most feasible strategies to improve the CO2 reduction performance of photocatalysts. This Perspective mainly focuses on the recent important advances in the fabrication and application of graphene-based photocatalysts for CO2 reduction to solar fuels. The existing challenges and difficulties of graphene-based photocatalysts are also discussed for...

Manganese Oxide/Carbon Yolk–Shell Nanorod Anodes for High Capacity Lithium Batteries

Abstract: Transition metal oxides have attracted much interest for their high energy density in lithium batteries. However, the fast capacity fading and the low power density still limit their practical implementation. In order to overcome these challenges, one-dimensional yolk-shell nanorods have been successfully constructed using manganese oxide as an example through a facile two-step sol-gel coating method. Dopamine and tetraethoxysilane are used as precursors to obtain uniform polymer coating and silica layer followed by converting into carbon shell and hollow space, respectively. As anode material for lithium batteries, the manganese oxide/carbon yolk-shell nanorod electrode has a reversible capacity of 660 mAh/g for initial cycle at 100 mA/g and exhibits excellent cyclability with a capacity of 634 mAh/g after 900 cycles at a current density of 500 mA/g. An enhanced capacity is observed during the long-term cycling process, which may be attributed to the structural integrity, the stability of solid electrolyte interphase layer, and the electrochemical actuation of the yolk-shell nanorod structure. The results demonstrate that the manganese oxide is well utilized with the one-dimensional yolk-shell structure, which represents an efficient way to realize excellent performance for practical applications.

Mechanical properties and thermal conductivity of graphene nanoplatelet/epoxy composites

Abstract: Nanocomposites of epoxy with 3 and 5 wt% graphene nanoplatelets (GnPs) were fabricated with GnP sizes of ~5 and <1 μm dispersed within an epoxy resin using a sonication process followed by three-roll milling. The morphology, mechanical, and thermal properties of the composites were investigated. Tensile and flexural properties measurements of these nanocomposites indicated higher modulus and strength with increasing concentration of small GnPs sizes (<1 μm, GnP-C750). The incorporation of larger GnPs sizes (~5 μm, GnP-5) significantly improved the tensile and flexural modulus but reduced the strength of the resulting composites. At 35 °C, the dynamic storage modulus of GnP-5/epoxy composites increased with increasing platelet concentration, and improved by 12 % at 3 wt% and 23 % at 5 wt%. The smaller GnP-C750 increased the storage modulus by 5 % at 3 wt% loading but only 2 % at 5 wt% loading. The glass transition temperatures of the composites increased with increasing platelet concentration regardless of the GnP particle size. A marked improvement in thermal conductivity was measured with the incorporation of the larger GnP size reaching 115 % at 5 wt% loading. The effects of different platelet sizes of the GnP reinforcement on the damage mechanisms of these nanocomposites were studied by scanning electron microscopy.

Origin of High Photocatalytic Efficiency in Monolayer g‑C3N4/CdS Heterostructure: A Hybrid DFT Study

Abstract: Graphite-like carbon nitride (g-C3N4)-based heterostructures have attracted much attention because of their prominent photocatalytic performance. However, theoretical understanding on the relations...

Synergetic Effect between Photocatalysis on TiO2 and Thermocatalysis on CeO2 for Gas-Phase Oxidation of Benzene on TiO2/CeO2 Nanocomposites

Abstract: TiO2/CeO2 nanocomposites of anatase TiO2 nanoparticles supported on microsized mesoporous CeO2 were prepared and characterized by SEM, TEM, BET, XRD, Raman, XPS, and diffuse reflectance UV–vis absorption. The formation of the TiO2/CeO2 nanocomposites considerably enhances their catalytic activity for the gas-phase oxidation of benzene, one of the hazardous volatile organic compounds (VOCs), under the irradiation of a Xe lamp compared to pure CeO2 and TiO2. A solar-light-driven thermocatalysis on CeO2 is found for the TiO2/CeO2 nanocomposites. There is a synergetic effect between the photocatalysis on TiO2 and the thermocatalysis on CeO2 for the TiO2/CeO2 nanocomposites, which significantly increases their catalytic activity. The CO2 formation rate (rCO2) of the TiO2/CeO2 nanocomposite with the Ti/Ce molar ratio of 0.108 under the synergetic photothermocatalytic condition is 36.4 times higher than its rCO2 under the conventional photocatalytic condition at near room temperature. CO temperature-programmed r...

A comprehensive analysis of energy management strategies for hybrid electric vehicles based on bibliometrics

Abstract: Hybrid electric vehicles (HEVs) are one of the most viable technologies to achieve the goals of energy saving and environmental protection before a breakthrough in battery technology and fuel cell technology. Energy management strategy as a key technology of HEVs is studied extensively and deeply to improve the performance of HEVs and speed up the industrialization of HEVs. This paper quantitatively analyzes and evaluates current research status of energy management strategies for HEVs based on bibliometrics for the first time, through content analysis involving analysis of author keywords and abstracts. Then qualitative analysis is performed for all kinds of energy management strategies that are used in HEVs in detail, essential characteristics involving pros and cons, interconnections and improvement potential among various energy management strategies are revealed from the view of control theory. Finally, latest developing trends in energy management strategies of HEVs are presented to improve the performance of HEVs based on above quantitative analysis and qualitative analysis, covering driving cycle recognition/prediction algorithms, integrated multi-objective, coordinated optimization energy management strategies, good balance between computation complexity and optimization performance of energy management strategies, fair and credible evaluation system of energy management strategies. This paper not only first provides a comprehensive analysis of energy management strategies for HEVs, but also puts forward the emphasis and orientation of future study, which will broaden relevant researchers׳ vision and promote the development of a simple and practical energy management controller with low cost and high performance for HEVs.

Phosphorene nanoribbon as a promising candidate for thermoelectric applications.

Abstract: In this work, the electronic properties of phosphorene nanoribbons with different width and edge configurations are studied by using density functional theory It is found that the armchair phosphorene nanoribbons are semiconducting while the zigzag nanoribbons are metallic The band gaps of armchair nanoribbons decrease monotonically with increasing ribbon width By passivating the edge phosphorus atoms with hydrogen, the zigzag series also become semiconducting, while the armchair series exhibit a larger band gap than their pristine counterpart The electronic transport properties of these phosphorene nanoribbons are then investigated using Boltzmann theory and relaxation time approximation We find that all the semiconducting nanoribbons exhibit very large values of Seebeck coefficient and can be further enhanced by hydrogen passivation at the edge Taking pristine armchair nanoribbons and hydrogen-passivated zigzag naoribbons with width N = 7, 8, 9 as examples, we calculate the lattice thermal conductivity with the help of phonon Boltzmann transport equation and evaluate the width-dependent thermoelectric performance Due to significantly enhanced Seebeck coefficient and decreased thermal conductivity, we find that at least one type of phosphorene nanoribbons can be optimized to exhibit very high figure of merit (ZT values) at room temperature, which suggests their appealing thermoelectric applications

Metal–organic molecular cages: applications of biochemical implications

Abstract: New well-designed materials are highly demanded with the prospect of versatile properties, offering successful applications as alternates to conventional materials. Major new insights into metal–organic self-assembled structures assisting biochemical purposes have recently emerged. Metal–organic polyhedral cages are highlighted as new research materials to be used for therapeutic, sensing and imaging, purposes etc. This tutorial review covers achievements in the biochemical applications of these multinuclear complexes. Examples of their ability to aid the ionic transport, biomolecular sensing, imaging, and drug delivery are presented.

Mechanically robust BiSbTe alloys with superior thermoelectric performance: A case study of stable hierarchical nanostructured thermoelectric materials

Abstract: Bismuth telluride based thermoelectric materials have been commercialized for a wide range of applications in power generation and refrigeration. However, the poor machinability and susceptibility to brittle fracturing of commercial ingots often impose significant limitations on the manufacturing process and durability of thermoelectric devices. In this study, melt spinning combined with a plasma-activated sintering (MS-PAS) method is employed for commercial p-type zone-melted (ZM) ingots of Bi_0.5Sb_1.5Te_3. This fast synthesis approach achieves hierarchical structures and in-situ nanoscale precipitates, resulting in the simultaneous improvement of the thermoelectric performance and the mechanical properties. Benefitting from a strong suppression of the lattice thermal conductivity, a peak ZT of 1.22 is achieved at 340 K in MS-PAS synthesized structures, representing about a 40% enhancement over that of ZM ingots. Moreover, MS-PAS specimens with hierarchical structures exhibit superior machinability and mechanical properties with an almost 30% enhancement in their fracture toughness, combined with an eightfold and a factor of six increase in the compressive and flexural strength, respectively. Accompanied by an excellent thermal stability up to 200 °C for the MS-PAS synthesized samples, the MS-PAS technique demonstrates great potential for mass production and large-scale applications of Bi_2Te_3 related thermoelectrics.

Improved properties of bone and cartilage tissue from 3D inkjet-bioprinted human mesenchymal stem cells by simultaneous deposition and photocrosslinking in PEG-GelMA.

Abstract: Bioprinting of bone and cartilage suffers from low mechanical properties. Here we have developed a unique inkjet bioprinting approach of creating mechanically strong bone and cartilage tissue constructs using poly(ethylene glycol) dimethacrylate, gelatin methacrylate, and human MSCs. The printed hMSCs were evenly distributed in the polymerized PEG-GelMA scaffold during layer-by-layer assembly. The procedure showed a good biocompatibility with >80% of the cells surviving the printing process and the resulting constructs provided strong mechanical support to the embedded cells. The printed mesenchymal stem cells showed an excellent osteogenic and chondrogenic differentiation capacity. Both osteogenic and chondrogenic differentiation as determined by specific gene and protein expression analysis (RUNX2, SP7, DLX5, ALPL, Col1A1, IBSP, BGLAP, SPP1, Col10A1, MMP13, SOX9, Col2A1, ACAN) was improved by PEG-GelMA in comparison to PEG alone. These observations were consistent with the histological evaluation. Inkjet bioprinted-hMSCs in simultaneously photocrosslinked PEG-GelMA hydrogel scaffolds demonstrated an improvement of mechanical properties and osteogenic and chondrogenic differentiation, suggesting its promising potential for usage in bone and cartilage tissue engineering.