Light-emitting diodes
Reads0
Chats0
TLDR
Bergh and P.J.Dean as discussed by the authors proposed a light-emitting diode (LEDD) for light-aware Diodes, which was shown to have promising performance.Abstract:
Light-Emitting Diodes. (Monographs in Electrical and Electronic Engineering.) By A. A. Bergh and P. J. Dean. Pp. viii+591. (Clarendon: Oxford; Oxford University: London, 1976.) £22.read more
Citations
More filters
Journal ArticleDOI
Fabrication of nanopatterned sapphire substrates by annealing of patterned Al thin films by Laser Interference Lithography
TL;DR: In this article, the authors show that the orientation of island patterns by dual stage annealing of patterned Al thin films for 24h at 450∘C, and 1h at 1000 ǫC, was the same as that of the sapphire (0001) substrates.
Journal ArticleDOI
Investigation of water splitting using III-N structures
Alexander Usikov,I A Ermakov,Heikki Helava,Sergey Kurin,Alexey Y. Nikiforov,B P Papchenko,M V Puzyk,Alexander Y. Polyakov,In Hwan Lee,Yu.N. Makarov +9 more
TL;DR: In this paper, the water photoelectrolysis in KOH-base aqueous solution using GaN-based structures as working electrodes is studied and the Debye screening effect in high-concentration of KOH electrolyte (20-40 wt.%) that reduces the potential barrier was observed clearly in the defectless nanopillar structures.
Journal ArticleDOI
A numerical study of the emission enhancement of light emitting diodes with an interfacial photonic crystal resonance reflector
TL;DR: In this paper, a vertical structure of light emitting diodes (LEDs) grown on a substrate embedded with a photonic crystal reflector to avoid light absorption in the absorbed substrate is proposed.
Journal ArticleDOI
CO2 Laser Processing On Ceramic Substrates Of Light Emitting Diode Assisted By Compressed Gas
Yeeu-Chang Lee,Ming-Hau Cheng +1 more
TL;DR: In this article, the authors used a CO2 laser with auxiliary gas to drill and cut Al2O3 and AlN ceramic substrates and investigated the influences of parameters such as auxiliary gas pressure, laser power, repetition rate and working speed on processing quality, in terms of pattern size, surface roughness, hole taper angle, and fracturing.
References
More filters
Reliability Engineering and System Safety
TL;DR: In this paper, a polynomial dimensional decomposition (PDD) method for global sensitivity analysis of stochastic systems subject to independent random input following arbitrary probability distributions is presented.
Journal ArticleDOI
Origin of efficiency droop in GaN-based light-emitting diodes
Min-Ho Kim,Martin F. Schubert,Qi Dai,Jong Kyu Kim,E. Fred Schubert,Joachim Piprek,Yongjo Park +6 more
TL;DR: In this paper, the efficiency droop in GaInN∕GaN multiple-quantum well (MQW) light-emitting diodes was investigated and it was shown that the droop is not related to MQW efficiency but rather to the recombination of carriers outside the MqW region.
Journal ArticleDOI
Lasing in direct-bandgap GeSn alloy grown on Si
Stephan Wirths,R. Geiger,R. Geiger,N. von den Driesch,Gregor Mussler,Toma Stoica,Siegfried Mantl,Zoran Ikonic,Martina Luysberg,Stefano Chiussi,J. M. Hartmann,Hans Sigg,Jérôme Faist,Dan Buca,Detlev Grützmacher +14 more
TL;DR: In this paper, a direct bandgap GeSn alloy, grown directly onto Si(001), was used for experimentally demonstrating lasing threshold and linewidth narrowing at low temperatures.
Journal ArticleDOI
Spectroscopic and Device Aspects of Nanocrystal Quantum Dots
Jeffrey M. Pietryga,Young-Shin Park,Young-Shin Park,Jaehoon Lim,Andrew F. Fidler,Wan Ki Bae,Sergio Brovelli,Victor I. Klimov +7 more
TL;DR: Recent advances in nanocrystal research related to applications of QD materials in lasing, light-emitting diodes (LEDs), and solar energy conversion are examined.
Journal ArticleDOI
LED Based Indoor Visible Light Communications: State of the Art
TL;DR: This paper provides a comprehensive survey on VLC with an emphasis on challenges faced in indoor applications over the period 1979-2014.