Journal ArticleDOI
The IEEE Reliability Test System-1996. A report prepared by the Reliability Test System Task Force of the Application of Probability Methods Subcommittee
C. Grigg,P. Wong,P. Albrecht,R.N. Allan,M. P. Bhavaraju,Roy Billinton,Q. Chen,C. C. Fong,S. Haddad,S. Kuruganty,Wenyuan Li,R. Mukerji,D. Patton,N. Rau,D. Reppen,A. Schneider,Mohammad Shahidehpour,Chanan Singh +17 more
Reads0
Chats0
TLDR
In this article, an enhanced test system (RTS-96) is described for use in bulk power system reliability evaluation studies, which will permit comparative and benchmark studies to be performed on new and existing reliability evaluation techniques.Abstract:
This report describes an enhanced test system (RTS-96) for use in bulk power system reliability evaluation studies. The value of the test system is that it will permit comparative and benchmark studies to be performed on new and existing reliability evaluation techniques. The test system was developed by modifying and updating the original IEEE RTS (referred to as RTS-79 hereafter) to reflect changes in evaluation methodologies and to overcome perceived deficiencies.read more
Citations
More filters
Journal ArticleDOI
Optimal Transmission Switching With Contingency Analysis
TL;DR: In this paper, the authors analyze the N-1 reliable dc optimal dispatch with transmission switching and demonstrate that these networks can be operated to satisfy N 1 standards while cutting costs by incorporating transmission switching into the dispatch.
Journal ArticleDOI
Transmission loss allocation: a comparison of different practical algorithms
TL;DR: In this article, the authors focus on transmission loss allocation procedures and provide a detailed comparison of four alternative algorithms: (1) pro rata (PR), (2) marginal allocation, (3) unsubsidized marginal allocation and (4) proportional sharing.
Journal ArticleDOI
Co-Optimization of Generation Unit Commitment and Transmission Switching With N-1 Reliability
TL;DR: This paper presents a co-optimization formulation of the generation unit commitment and transmission switching problem while ensuring N-1 reliability, and shows that the optimal topology of the network can vary from hour to hour.
Journal ArticleDOI
Probabilistic power flow with correlated wind sources
TL;DR: In this article, a probabilistic power flow model that takes into account spatially correlated power sources and loads is proposed to assess the impact of intermittent generators such as wind power ones on a power network.
Journal ArticleDOI
Dynamic modeling and sizing optimization of stand-alone photovoltaic power systems using hybrid energy storage technology
TL;DR: In this paper, three stand-alone photovoltaic power systems using different energy storage technologies are studied, including PV modules, fuel cells, electrolyzers, compressors, hydrogen tanks and batteries.
References
More filters
Journal ArticleDOI
IEEE Reliability Test System
TL;DR: In this article, a load model, generation system, and transmission network which can be used to test or compare methods for reliability analysis of power systems is described. But the authors focus on the reliability of the power system and do not consider the transmission system.
Journal ArticleDOI
The IEEE Reliability Test System - Extensions to and Evaluation of the Generating System
TL;DR: The RTS is extended by including more factors and system conditions which may be included in the reliability evaluation of generating systems to create a wider set of consistent data.
Journal ArticleDOI
Effect of Station Originated Outages in a Composite System Adequacy Evaluation of the IEEE Reliability Test System
TL;DR: In this article, the effects of terminal stations in composite system reliability evaluation by using the IEEE Reliability Test System (RTS) are discussed. But the authors do not consider the impact of station originated outages on the composite system adequacy indices.
Journal ArticleDOI
A comprehensive approach for adequacy and security evaluation of bulk power systems
TL;DR: In this paper, a new approach is described for assessing the adequacy and security of bulk power systems, which takes into account generation and transmission failures, load variation, generation economic dispatch, security limits, maintenance schedules, the control actions implemented in emergencies.
Journal ArticleDOI
Incorporation of a DC-link in a composite system adequacy assessment-composite system analysis
Roy Billinton,D.S. Ahluwalia +1 more
TL;DR: In this paper, the IEEE Reliability Test System (RTS) is augmented by adding a direct current (DC) link and is used as the test system for adequacy evaluation of a composite generation and transmission system.