Institution
University of Science and Technology Beijing
Education•Beijing, China•
About: University of Science and Technology Beijing is a education organization based out in Beijing, China. It is known for research contribution in the topics: Microstructure & Alloy. The organization has 41558 authors who have published 44473 publications receiving 623229 citations. The organization is also known as: Beijing Steel and Iron Institute.
Topics: Microstructure, Alloy, Corrosion, Ultimate tensile strength, Austenite
Papers published on a yearly basis
Papers
More filters
••
TL;DR: In this article, the deformation responses of NiCoCrFe high-entropy alloy (HEA) under quasi-static and dynamic (1,000-6,000/s) tension were investigated.
134 citations
••
TL;DR: Investigation of the behaviors and kinetics of toluene adsorption and desorption on activated carbons with varying pore structure found the quasi-first-order model was more suitable for describing the process than the quasi"-second-order" model.
Abstract: This work was undertaken to investigate the behaviors and kinetics of toluene adsorption and desorption on activated carbons with varying pore structure. Five kinds of activated carbon from different raw materials were selected. Adsorption isotherms and breakthrough curves for toluene were measured. Langmuir and Freundlich equations were fitted to the equilibrium data, and the Freundlich equation was more suitable for simulating toluene adsorption. The process consisted of monolayer, multilayer and partial active site adsorption types. The effect of the pore structure of the activated carbons on toluene adsorption capacity was investigated. The quasi-first-order model was more suitable for describing the process than the quasi-second-order model. The adsorption data was also modeled by the internal particle diffusion model and it was found that the adsorption process could be divided into three stages. In the external surface adsorption process, the rate depended on the specific surface area. During the particle diffusion stage, pore structure and volume were the main factors affecting adsorption rate. In the final equilibrium stage, the rate was determined by the ratio of meso- and macro-pores to total pore volume. The rate over the whole adsorption process was dominated by the toluene concentration. The desorption behavior of toluene on activated carbons was investigated, and the process was divided into heat and mass transfer parts corresponding to emission and diffusion mechanisms, respectively. Physical adsorption played the main role during the adsorption process.
134 citations
••
TL;DR: This minireview is intended to survey the progress on Cs 2 AgInCl 6 and provide a guidance for further study to develop new lead-free halide perovskites for emerging optoelectronic applications.
Abstract: Lead-free halide perovskites have drawn wide attention as alternatives to their toxic and poorly stable lead-based counterparts. Among them, double perovskites with Cs2 AgInCl6 composition, often doped with various elements, have been in the spotlight owing to their intriguing optical properties, namely, self-trapped exciton (STEs) emission and dopant-induced photoluminescence. This interest has sparked different synthesis approaches towards both crystals and nanocrystals, and the exploration of many alloy compositions with mono- and trivalent cations other than Ag+ and In3+ . In this Minireview we describe the recent developments on Cs2 AgInCl6 bulk crystals and nanocrystals, their synthesis strategies, intrinsic optical properties, and tunable photoluminescence originating from different alloying and doping effects. We also discuss progress on computational studies aimed at understanding the thermodynamic stability, the role of defects, and the origin of photoluminescence in relation to the STEs and the direct band gap character.
134 citations
••
Hunan University1, University of Texas at Austin2, Nanjing Tech University3, Chinese Academy of Sciences4, Wuyi University5, Tongji University6, Tsinghua University7, Tianjin University8, University of Technology, Sydney9, South China University of Technology10, Central South University11, Beijing University of Technology12, Shanghai Jiao Tong University13, Dalian Institute of Chemical Physics14, Oregon State University15, Nankai University16, University of Science and Technology Beijing17, University of Wollongong18
TL;DR: In this paper, the authors present a 2020 battery technology roadmap for renewable energy generation, focusing on various kinds of batteries to store energy, such as lithium-related batteries, sodium-related, zinc-related and aluminum-related.
Abstract: Sun, wind and tides have huge potential in providing us electricity in an environmental-friendly way. However, its intermittency and non-dispatchability are major reasons preventing full-scale adoption of renewable energy generation. Energy storage will enable this adoption by enabling a constant and high-quality electricity supply from these systems. But which storage technology should be considered is one of important issues. Nowadays, great effort has been focused on various kinds of batteries to store energy, lithium-related batteries, sodium-related batteries, zinc-related batteries, aluminum-related batteries and so on. Some cathodes can be used for these batteries, such as sulfur, oxygen, layered compounds. In addition, the construction of these batteries can be changed into flexible, flow or solid-state types. There are many challenges in electrode materials, electrolytes and construction of these batteries and research related to the battery systems for energy storage is extremely active. With the myriad of technologies and their associated technological challenges, we were motivated to assemble this 2020 battery technology roadmap.
133 citations
••
TL;DR: In this paper, a test method of the efflorescence degree of fly ash based geopolymer was proposed and applied and the effects of the Si/Al ratio on products, microstructure, pore structures, compressive strength, water loss rate and efforescence of geopolymers were systematically investigated.
133 citations
Authors
Showing all 41904 results
Name | H-index | Papers | Citations |
---|---|---|---|
Zhong Lin Wang | 245 | 2529 | 259003 |
Yang Yang | 171 | 2644 | 153049 |
Jun Chen | 136 | 1856 | 77368 |
Jun Lu | 135 | 1526 | 99767 |
Jie Liu | 131 | 1531 | 68891 |
Shuai Liu | 129 | 1095 | 80823 |
Jian Zhou | 128 | 3007 | 91402 |
Chao Zhang | 127 | 3119 | 84711 |
Shaobin Wang | 126 | 872 | 52463 |
Tao Zhang | 123 | 2772 | 83866 |
Jian Liu | 117 | 2090 | 73156 |
Xin Li | 114 | 2778 | 71389 |
Jianhui Hou | 110 | 429 | 53265 |
Hong Wang | 110 | 1633 | 51811 |
Baoshan Xing | 109 | 823 | 48944 |