Showing papers by "Hanyang University published in 2012"

Derivation and validation of the Systemic Lupus International Collaborating Clinics classification criteria for systemic lupus erythematosus.

Abstract: Objective The Systemic Lupus International Collaborating Clinics (SLICC) group revised and validated the American College of Rheumatology (ACR) systemic lupus erythematosus (SLE) classification criteria in order to improve clinical relevance, meet stringent methodology requirements, and incorporate new knowledge regarding the immunology of SLE. Methods The classification criteria were derived from a set of 702 expert-rated patient scenarios. Recursive partitioning was used to derive an initial rule that was simplified and refined based on SLICC physician consensus. The SLICC group validated the classification criteria in a new validation sample of 690 new expert-rated patient scenarios. Results Seventeen criteria were identified. In the derivation set, the SLICC classification criteria resulted in fewer misclassifications compared with the current ACR classification criteria (49 versus 70; P = 0.0082) and had greater sensitivity (94% versus 86%; P < 0.0001) and equal specificity (92% versus 93%; P = 0.39). In the validation set, the SLICC classification criteria resulted in fewer misclassifications compared with the current ACR classification criteria (62 versus 74; P = 0.24) and had greater sensitivity (97% versus 83%; P < 0.0001) but lower specificity (84% versus 96%; P < 0.0001). Conclusion The new SLICC classification criteria performed well in a large set of patient scenarios rated by experts. According to the SLICC rule for the classification of SLE, the patient must satisfy at least 4 criteria, including at least one clinical criterion and one immunologic criterion OR the patient must have biopsy-proven lupus nephritis in the presence of antinuclear antibodies or antidouble-stranded DNA antibodies. (Less)

Challenges Facing Lithium Batteries and Electrical Double‐Layer Capacitors

Abstract: Energy-storage technologies, including electrical double-layer capacitors and rechargeable batteries, have attracted significant attention for applications in portable electronic devices, electric vehicles, bulk electricity storage at power stations, and “load leveling” of renewable sources, such as solar energy and wind power. Transforming lithium batteries and electric double-layer capacitors requires a step change in the science underpinning these devices, including the discovery of new materials, new electrochemistry, and an increased understanding of the processes on which the devices depend. The Review will consider some of the current scientific issues underpinning lithium batteries and electric double-layer capacitors.

An improved high-performance lithium-air battery.

Abstract: Although dominating the consumer electronics markets as the power source of choice for popular portable devices, the common lithium battery is not yet suited for use in sustainable electrified road transport. The development of advanced, higher-energy lithium batteries is essential in the rapid establishment of the electric car market. Owing to its exceptionally high energy potentiality, the lithium-air battery is a very appealing candidate for fulfilling this role. However, the performance of such batteries has been limited to only a few charge-discharge cycles with low rate capability. Here, by choosing a suitable stable electrolyte and appropriate cell design, we demonstrate a lithium-air battery capable of operating over many cycles with capacity and rate values as high as 5,000 mAh g(carbon)(-1) and 3 A g(carbon)(-1), respectively. For this battery we estimate an energy density value that is much higher than those offered by the currently available lithium-ion battery technology.

Nanostructured high-energy cathode materials for advanced lithium batteries

Abstract: Nickel-rich layered lithium transition metal oxides have been investigated as high-energy cathode materials for rechargeable lithium batteries because of their high specific capacity and relatively low cost. Such an oxide with high capacity (215 mA h g-1), where the nickel concentration decreases linearly whereas the manganese concentration increases linearly from the centre to the outer layer of each particle, is now proposed. Nickel-rich layered lithium transition-metal oxides, LiNi1−xMxO2 (M = transition metal), have been under intense investigation as high-energy cathode materials for rechargeable lithium batteries because of their high specific capacity and relatively low cost1,2,3. However, the commercial deployment of nickel-rich oxides has been severely hindered by their intrinsic poor thermal stability at the fully charged state and insufficient cycle life, especially at elevated temperatures1,2,3,4,5,6. Here, we report a nickel-rich lithium transition-metal oxide with a very high capacity (215 mA h g−1), where the nickel concentration decreases linearly whereas the manganese concentration increases linearly from the centre to the outer layer of each particle. Using this nano-functional full-gradient approach, we are able to harness the high energy density of the nickel-rich core and the high thermal stability and long life of the manganese-rich outer layers. Moreover, the micrometre-size secondary particles of this cathode material are composed of aligned needle-like nanosize primary particles, resulting in a high rate capability. The experimental results suggest that this nano-functional full-gradient cathode material is promising for applications that require high energy, long calendar life and excellent abuse tolerance such as electric vehicles.

Five amino acids in three HLA proteins explain most of the association between MHC and seropositive rheumatoid arthritis

Abstract: The genetic association of the major histocompatibility complex (MHC) to rheumatoid arthritis risk has commonly been attributed to alleles in HLA-DRB1. However, debate persists about the identity of the causal variants in HLA-DRB1 and the presence of independent effects elsewhere in the MHC. Using existing genome-wide SNP data in 5,018 individuals with seropositive rheumatoid arthritis (cases) and 14,974 unaffected controls, we imputed and tested classical alleles and amino acid polymorphisms in HLA-A, HLA-B, HLA-C, HLA-DPA1, HLA-DPB1, HLA-DQA1, HLA-DQB1 and HLA-DRB1, as well as 3,117 SNPs across the MHC. Conditional and haplotype analyses identified that three amino acid positions (11, 71 and 74) in HLA-DRβ1 and single-amino-acid polymorphisms in HLA-B (at position 9) and HLA-DPβ1 (at position 9), which are all located in peptide-binding grooves, almost completely explain the MHC association to rheumatoid arthritis risk. This study shows how imputation of functional variation from large reference panels can help fine map association signals in the MHC.

Structure and dynamics of the M3 muscarinic acetylcholine receptor

Abstract: Acetylcholine, the first neurotransmitter to be identified, exerts many of its physiological actions via activation of a family of G-protein-coupled receptors (GPCRs) known as muscarinic acetylcholine receptors (mAChRs). Although the five mAChR subtypes (M1-M5) share a high degree of sequence homology, they show pronounced differences in G-protein coupling preference and the physiological responses they mediate. Unfortunately, despite decades of effort, no therapeutic agents endowed with clear mAChR subtype selectivity have been developed to exploit these differences. We describe here the structure of the G(q/11)-coupled M3 mAChR ('M3 receptor', from rat) bound to the bronchodilator drug tiotropium and identify the binding mode for this clinically important drug. This structure, together with that of the G(i/o)-coupled M2 receptor, offers possibilities for the design of mAChR subtype-selective ligands. Importantly, the M3 receptor structure allows a structural comparison between two members of a mammalian GPCR subfamily displaying different G-protein coupling selectivities. Furthermore, molecular dynamics simulations suggest that tiotropium binds transiently to an allosteric site en route to the binding pocket of both receptors. These simulations offer a structural view of an allosteric binding mode for an orthosteric GPCR ligand and provide additional opportunities for the design of ligands with different affinities or binding kinetics for different mAChR subtypes. Our findings not only offer insights into the structure and function of one of the most important GPCR families, but may also facilitate the design of improved therapeutics targeting these critical receptors.

The Role of AlF3 Coatings in Improving Electrochemical Cycling of Li-Enriched Nickel-Manganese Oxide Electrodes for Li-Ion Batteries

Abstract: A Li[Li(0.19)Ni(0.16)Co(0.08)Mn(0.57)]O(2) cathode was coated with AlF(3) on the surface. The AlF(3)-coating enhanced the overall electrochemical characteristics of the electrode while overcoming the typical shortcomings of lithium-enriched cathodes. This improvement was attributed to the transformation of the initial electrode layer to a spinel phase, induced by the Li chemical leaching effect of the AlF(3) coating layer.

Decreased expression of synapse-related genes and loss of synapses in major depressive disorder

Abstract: Previous imaging and postmortem studies have reported a lower brain volume and a smaller size and density of neurons in the dorsolateral prefrontal cortex (dlPFC) of subjects with major depressive disorder (MDD). These findings suggest that synapse number and function are decreased in the dlPFC of patients with MDD. However, there has been no direct evidence reported for synapse loss in MDD, and the gene expression alterations underlying these effects have not been identified. Here we use microarray gene profiling and electron microscopic stereology to reveal lower expression of synaptic-function–related genes (CALM2, SYN1, RAB3A, RAB4B and TUBB4) in the dlPFC of subjects with MDD and a corresponding lower number of synapses. We also identify a transcriptional repressor, GATA1, expression of which is higher in MDD and that, when expressed in PFC neurons, is sufficient to decrease the expression of synapse-related genes, cause loss of dendritic spines and dendrites, and produce depressive behavior in rat models of depression.

Electrically, Chemically, and Photonically Powered Torsional and Tensile Actuation of Hybrid Carbon Nanotube Yarn Muscles

Abstract: Artificial muscles are of practical interest, but few types have been commercially exploited. Typical problems include slow response, low strain and force generation, short cycle life, use of electrolytes, and low energy efficiency. We have designed guest-filled, twist-spun carbon nanotube yarns as electrolyte-free muscles that provide fast, high-force, large-stroke torsional and tensile actuation. More than a million torsional and tensile actuation cycles are demonstrated, wherein a muscle spins a rotor at an average 11,500 revolutions/minute or delivers 3% tensile contraction at 1200 cycles/minute. Electrical, chemical, or photonic excitation of hybrid yarns changes guest dimensions and generates torsional rotation and contraction of the yarn host. Demonstrations include torsional motors, contractile muscles, and sensors that capture the energy of the sensing process to mechanically actuate.

Bisphenol S in Urine from the United States and Seven Asian Countries: Occurrence and Human Exposures

Abstract: As concern regarding the toxic effects of bisphenol A (BPA) grows, BPA in many consumer products is gradually being replaced with compounds such as bisphenol S (BPS). Nevertheless, data on the occurrence of BPS in human specimens are limited. In this study, 315 urine samples, collected from the general populations in the United States, China, India, Japan, Korea, Kuwait, Malaysia, and Vietnam, were analyzed for the presence of total BPS (free plus conjugated) concentrations by high-performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS). BPS was detected in 81% of the urine samples analyzed at concentrations ranging from below the limit of quantitation (LOQ; 0.02 ng/mL) to 21 ng/mL (geometric mean: 0.168 ng/mL). The urinary BPS concentration varied among countries, and the highest geometric mean concentration [1.18 ng/mLor 0.933 μg/g creatinine (Cre)] of BPS was found in urine samples from Japan, followed by the United States (0.299 ng/mL, 0.304 μg/g Cre), China (0.226 ng/mL, 0.223 μg/g Cr...

Observation of two charged bottomoniumlike resonances in Υ(5S) decays.

Abstract: We report the observation of two narrow structures in the mass spectra of the pi(+/-) Y(nS) (n = 1, 2, 3) and pi(+/-) h(b)(mP) (m = 1, 2) pairs that are produced in association with a single charged pion in Y(5S) decays The measured masses and widths of the two structures averaged over the five final states are M-1 = (10 6072 +/- 20) MeV/c(2), Gamma(1) =(184 +/- 24) MeV, and M-2 = (10 6522 +/- 15) MeV/c(2), Gamma(2) = (115 +/- 22) MeV The results are obtained with a 1214 fb(-1) data sample collected with the Belle detector in the vicinity of the Y(5S) resonance at the KEKB asymmetric-energy e(+)e(-) collider

Pharmacological Rescue of Mitochondrial Deficits in iPSC-Derived Neural Cells from Patients with Familial Parkinson’s Disease

Abstract: Parkinson’s disease (PD) is a common neurodegenerative disorder caused by genetic and environmental factors that results in degeneration of the nigrostriatal dopaminergic pathway in the brain. We analyzed neural cells generated from induced pluripotent stem cells (iPSCs) derived from PD patients and presymptomatic individuals carrying mutations in the PINK1 (PTEN-induced putative kinase 1 )a ndLRRK2 (leucine-rich repeat kinase 2) genes, and compared them to those of healthy control subjects. We measured several aspects of mitochondrial responses in the iPSC-derived neural cells including production of reactive oxygen species, mitochondrial respiration, proton leakage, and intraneuronal movement of mitochondria. Cellular vulnerability associated with mitochondrial dysfunction in iPSC-derived neural cells from familial PD patients and at-risk individuals could be rescued with coenzyme Q10, rapamycin, or the LRRK2 kinase inhibitor GW5074. Analysis of mitochondrial responses in iPSCderived neural cells from PD patients carrying different mutations provides insight into convergence of cellular disease mechanisms between different familial forms of PD and highlights the importance of oxidative stress and mitochondrial dysfunction in this neurodegenerative disease.

Occurrence of eight bisphenol analogues in indoor dust from the United States and several Asian countries: implications for human exposure.

Abstract: Bisphenol A has been reported to be a ubiquitous contaminant in indoor dust, and human exposure to this compound is well documented. Information on the occurrence of and human exposure to other bisphenol analogues is limited. In this study, eight bisphenol analogues, namely 2,2-bis(4-hydroxyphenyl)propane (BPA), 4,4′-(hexafluoroisopropylidene)diphenol (BPAF), 4,4′-(1-phenylethylidene)bisphenol (BPAP), 2,2-bis(4-hydroxyphenyl)butane (BPB), 4,4′-dihydroxydiphenylmethane (BPF), 4,4′-(1,4-phenylenediisopropylidene)bisphenol (BPP), 4,4′- sulfonyldiphenol (BPS), and 4,4′-cyclohexylidenebisphenol (BPZ), were determined in indoor dust samples (n = 156) collected from the United States (U.S.), China, Japan, and Korea. Samples were extracted by solid–liquid extraction, purified by automated solid phase extraction methods, and determined by liquid chromatography-tandem mass spectrometry (LC-MS/MS). The total concentrations of bisphenols (∑BPs; sum of eight bisphenols) in dust were in the range of 0.026–111 μg/g (geo...

Advances in high permeability polymeric membrane materials for CO2 separations

Abstract: Global CO2 emissions have increased steadily in tandem with the use of fossil fuels. A paradigm shift is needed in developing new ways by which energy is supplied and utilized, together with the mitigation of climate change through CO2 reduction technologies. There is an almost universal acceptance of the link between rising anthropogenic CO2 levels due to fossil fuel combustion and global warming accompanied by unpredictable climate change. Therefore, renewable energy, non-fossil fuels and CO2 capture and storage (CCS) must be deployed on a massive scale. CCS technologies provide a means for reducing greenhouse gas emissions, in addition to the current strategies of improving energy efficiency. Coal-fired power plants are among the main large-scale CO2 emitters, and capture of the CO2 emissions can be achieved with conventional technologies such as amine absorption. However, this energy-consuming process, calculated at approximately 30% of the power plant capacity, would result in unacceptable increases in power generation costs. Membrane processes offer a potentially viable energy-saving alternative for CO2 capture because they do not involve any phase transformation. However, typical gas separation membranes that are currently available have insufficiently high permeability to be able to process the massive volumes of flue gas, which would result in a high CO2 capture. Polymer membranes highly permeable to CO2 and having good selectivity should be developed for the membrane process to be viable. This perspective review summarizes recent noteworthy advances in polymeric materials having very high CO2 permeability and good CO2/N2 selectivity that largely surpass the separation performance of conventional polymer materials. Five important classes of polymer membrane materials are highlighted: polyimides, thermally rearranged polymers (TRs), substituted polyacetylenes, polymers with intrinsic microporosity (PIM) and polyethers, which provide insights into polymer designs suitable for CO2 separation from, for example, the post-combustion flue gases in coal-fired power plants.

C-H activation: a complementary tool in the total synthesis of complex natural products.

Abstract: The recent advent of transition-metal mediated CH activation is revolutionizing the synthetic field and gradually infusing a “CH activation mind-set” in both students and practitioners of organic synthesis. As a powerful testament of this emerging synthetic tool, applications of CH activation in the context of total synthesis of complex natural products are beginning to blossom. Herein, recently completed total syntheses showcasing creative and ingenious incorporation of CH activation as a strategic manoeuver are compared with their “non-CH activation” counterparts, illuminating a new paradigm in strategic synthetic design.

Microfluidic fabrication of microengineered hydrogels and their application in tissue engineering

Abstract: Microfluidic technologies are emerging as an enabling tool for various applications in tissue engineering and cell biology. One emerging use of microfluidic systems is the generation of shape-controlled hydrogels (i.e., microfibers, microparticles, and hydrogel building blocks) for various biological applications. Furthermore, the microfluidic fabrication of cell-laden hydrogels is of great benefit for creating artificial scaffolds. In this paper, we review the current development of microfluidic-based fabrication techniques for the creation of fibers, particles, and cell-laden hydrogels. We also highlight their emerging applications in tissue engineering and regenerative medicine.

Synergistic toughening of composite fibres by self-alignment of reduced graphene oxide and carbon nanotubes.

Abstract: The extraordinary properties of graphene and carbon nanotubes motivate the development of methods for their use in producing continuous, strong, tough fibres. Previous work has shown that the toughness of the carbon nanotube-reinforced polymer fibres exceeds that of previously known materials. Here we show that further increased toughness results from combining carbon nanotubes and reduced graphene oxide flakes in solution-spun polymer fibres. The gravimetric toughness approaches 1,000 J g(-1), far exceeding spider dragline silk (165 J g(-1)) and Kevlar (78 J g(-1)). This toughness enhancement is consistent with the observed formation of an interconnected network of partially aligned reduced graphene oxide flakes and carbon nanotubes during solution spinning, which act to deflect cracks and allow energy-consuming polymer deformation. Toughness is sensitive to the volume ratio of the reduced graphene oxide flakes to the carbon nanotubes in the spinning solution and the degree of graphene oxidation. The hybrid fibres were sewable and weavable, and could be shaped into high-modulus helical springs.

Longitudinal Test of Self-Determination Theory's Motivation Mediation Model in a Naturally Occurring Classroom Context

Abstract: This study provides the first longitudinally designed, classroom-based empirical test of self-determination theory's motivation mediation model. Measures of perceived autonomy support, motivation (autonomy need satisfaction), engagement, and achievement were collected from 500 (257 females, 243 males) 8th-grade students in Korea in a 3-wave longitudinal research design. Multilevel structural equation modeling tested the model in which early-semester perceived autonomy support increased mid-semester autonomy need satisfaction, which, in turn, increased end-of-the-semester engagement, which then predicted course achievement. We further tested for possible reciprocal pathways and for the stability of all effects throughout the model. Results revealed a complex, dynamic model that unfolds within naturally occurring classroom processes, one that validated the hypothesized model but also extended and qualified it in important ways. All hypothesized effects were supported, but they were not stable over the course of the semester, largely because of the emergence of several reciprocal effects. Overall, this longitudinal test revealed a more dynamic model than suggested by previous cross-sectional investigations.

Biomimetic Scaffolds for Tissue Engineering

Abstract: Biomimetic scaffolds mimic important features of the extracellular matrix (ECM) architecture and can be finely controlled at the nano- or microscale for tissue engineering. Rational design of biomimetic scaffolds is based on consideration of the ECM as a natural scaffold; the ECM provides cells with a variety of physical, chemical, and biological cues that affect cell growth and function. There are a number of approaches available to create 3D biomimetic scaffolds with control over their physical and mechanical properties, cell adhesion, and the temporal and spatial release of growth factors. Here, an overview of some biological features of the natural ECM is presented and a variety of original engineering methods that are currently used to produce synthetic polymer-based scaffolds in pre-fabricated form before implantation, to modify their surfaces with biochemical ligands, to incorporate growth factors, and to control their nano- and microscale geometry to create biomimetic scaffolds are discussed. Finally, in contrast to pre-fabricated scaffolds composed of synthetic polymers, injectable biomimetic scaffolds based on either genetically engineered- or chemically synthesized-peptides of which sequences are derived from the natural ECM are discussed. The presence of defined peptide sequences can trigger in situ hydrogelation via molecular self-assembly and chemical crosslinking. A basic understanding of the entire spectrum of biomimetic scaffolds provides insight into how they can potentially be used in diverse tissue engineering, regenerative medicine, and drug delivery applications.

Bisphenol analogues in sediments from industrialized areas in the United States, Japan, and Korea: spatial and temporal distributions.

Abstract: Bisphenol analogues are used in the production of polycarbonate plastics and epoxy resins. Despite the widespread use of bisphenols, few studies have reported the occurrence of compounds other than bisphenol A (BPA) in sediment. In this study, concentrations and profiles of eight bisphenol analogues were determined using high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) in sediments collected from several industrialized areas in the United States (U.S.), Japan, and Korea. The total concentrations of bisphenols (ΣBPs; sum of eight bisphenols) in sediment ranged from below the limit of quantitation (LOQ) to 25,300 ng/g dry weight (dw), with a mean value of 201 ng/g dw. Sediment samples from Lake Shihwa, Korea, contained the highest concentrations of both individual and total bisphenols. Among individual bisphenols, BPA and bisphenol F (BPF) were the predominant compounds, accounting for 64% and 30% of the total bisphenol concentrations in sediment. We also examined vertical profiles of concentrations of bisphenol analogues in sediment cores from the U.S. and Japan. Sediment cores from the U.S. showed a gradual decline in the concentrations of bisphenols as compared to the past decade. BPA concentrations were found to decline in a sediment core from Tokyo Bay, but bisphenol S (BPS) was more frequently detected in core sections that represent the most recent decade, which is consistent with the replacement of BPA with BPS in some applications since 2001 in Japan.

Shigella sonnei genome sequencing and phylogenetic analysis indicate recent global dissemination from Europe.

Abstract: Shigella are human-adapted Escherichia coli that have gained the ability to invade the human gut mucosa and cause dysentery(1,2), spreading efficiently via low-dose fecal-oral transmission(3,4). Historically, S. sonnei has been predominantly responsible for dysentery in developed countries but is now emerging as a problem in the developing world, seeming to replace the more diverse Shigella flexneri in areas undergoing economic development and improvements in water quality(4-6). Classical approaches have shown that S. sonnei is genetically conserved and clonal(7). We report here whole-genome sequencing of 132 globally distributed isolates. Our phylogenetic analysis shows that the current S. sonnei population descends from a common ancestor that existed less than 500 years ago and that diversified into several distinct lineages with unique characteristics. Our analysis suggests that the majority of this diversification occurred in Europe and was followed by more recent establishment of local pathogen populations on other continents, predominantly due to the pandemic spread of a single, rapidly evolving, multidrug-resistant lineage.

CEO Ethical Leadership, Ethical Climate, Climate Strength, and Collective Organizational Citizenship Behavior

Abstract: In spite of an increasing number of studies on ethical climate, little is known about the antecedents of ethical climate and the moderators of the relationship between ethical climate and work outcomes. The present study conducted firm-level analyses regarding the relationship between chief executive officer (CEO) ethical leadership and ethical climate, and the moderating effect of climate strength (i.e., agreement in climate perceptions) on the relationship between ethical climate and collective organizational citizenship behavior (OCB). Self-report data were collected from 223 CEOs and 6,021 employees in South Korea. The results supported all study hypotheses. As predicted, CEOs’ self-rated ethical leadership was positively associated with employees’ aggregated perceptions of the ethical climate of the firm. The relationship between ethical climate and firm-level collective OCB was moderated by climate strength. More specifically, the relationships between ethical climate and interpersonally directed collective OCB and between ethical climate and organizationally directed collective OCB were more pronounced when climate strength was high than when it was low. Theoretical and practical implications of these findings are addressed herein.