Institution
Rensselaer Polytechnic Institute
Education•Troy, New York, United States•
About: Rensselaer Polytechnic Institute is a education organization based out in Troy, New York, United States. It is known for research contribution in the topics: Terahertz radiation & Finite element method. The organization has 19024 authors who have published 39922 publications receiving 1414699 citations. The organization is also known as: RPI & Rensselaer Institute.
Papers published on a yearly basis
Papers
More filters
••
TL;DR: In this article, a review of small-signal analysis for AC distributed power systems can be found in several new and emerging applications, and the compatibility of each type of models with state-space and impedance-based system analysis approaches is discussed.
Abstract: AC distributed power systems (DPS) can be found in several new and emerging applications. Similar to dc distributed power systems, an ac DPS relies on power electronics and control to realize its functions and achieve the required performance. System stability and power quality are important issues in both types of systems due to the complex system behavior resulted from active control at both the source and the load side. Traditional small-signal analysis methods cannot be directly applied to an ac DPS because of the periodically time-varying system operation trajectory. Possible solutions to this problem include transformation into a rotating (dq) reference frame, modeling using dynamic phasors, reduced-order modeling, and harmonic linearization. This paper reviews these small-signal methods and discusses their utilities as well as limitations. Compatibility of each type of models with state-space and impedance-based system analysis approaches will also be discussed. Problems related to the linearization of phasor-based models and their use in impedance-based system analysis are highlighted in particular.
583 citations
••
TL;DR: The fabrication of freestanding monolithic uniform macroscopic hollow cylinders having radially aligned carbon nanotube walls, with diameters and lengths up to several centimetres are reported, which may allow them to compete with ceramic- and polymer-based separation membranes used commercially.
Abstract: Over the past decade of nanotube research, a variety of organized nanotube architectures have been fabricated using chemical vapour deposition. The idea of using nanotube structures in separation technology has been proposed, but building macroscopic structures that have controlled geometric shapes, density and dimensions for specific applications still remains a challenge. Here we report the fabrication of freestanding monolithic uniform macroscopic hollow cylinders having radially aligned carbon nanotube walls, with diameters and lengths up to several centimetres. These cylindrical membranes are used as filters to demonstrate their utility in two important settings: the elimination of multiple components of heavy hydrocarbons from petroleum-a crucial step in post-distillation of crude oil-with a single-step filtering process, and the filtration of bacterial contaminants such as Escherichia coli or the nanometre-sized poliovirus ( approximately 25 nm) from water. These macro filters can be cleaned for repeated filtration through ultrasonication and autoclaving. The exceptional thermal and mechanical stability of nanotubes, and the high surface area, ease and cost-effective fabrication of the nanotube membranes may allow them to compete with ceramic- and polymer-based separation membranes used commercially.
583 citations
••
TL;DR: 3D printed skin tissue was morphologically and biologically representative of in vivo human skin tissue and can be further extended for enhancing the complexity of the skin model via the incorporation of secondary and adnexal structures or the inclusion of diseased cells to serve as a model for studying the pathophysiology of skin diseases.
Abstract: Three-dimensional (3D) bioprinting, a flexible automated on-demand platform for the free-form fabrication of complex living architectures, is a novel approach for the design and engineering of huma...
582 citations
••
TL;DR: The authors analyzes the experiences and developments of Hungarian banking sector during the transitional process from a centralized economy to a market-oriented system and identifies that early reorganization initiatives, flexible approaches to privatization, and liberal policies towards foreign banks involvement with the domestic institutions helped to build a relatively stable and increasingly efficient banking system.
Abstract: The paper analyzes the experiences and developments of Hungarian banking sector during the transitional process from a centralized economy to a market-oriented system. The paper identifies that early reorganization initiatives, flexible approaches to privatization, and liberal policies towards foreign banks’ involvement with the domestic institutions helped to build a relatively stable and increasingly efficient banking system. Foreign banks and banks with higher foreign bank ownership involvement were associated with lower inefficiency.
580 citations
••
Columbia University1, University of Amsterdam2, University of Bologna3, University of Mainz4, University of Coimbra5, Weizmann Institute of Science6, New York University Abu Dhabi7, University of Zurich8, Stockholm University9, Rensselaer Polytechnic Institute10, Max Planck Society11, University of Münster12, University of Bern13, Purdue University14, École des mines de Nantes15, University of California, Los Angeles16, Rice University17
TL;DR: In this article, the expected sensitivity of the Xenon1T experiment to the spin-independent WIMP-nucleon interaction cross section was investigated based on Monte Carlo predictions of the electronic and nuclear recoil backgrounds.
Abstract: The XENON1T experiment is currently in the commissioning phase at the Laboratori Nazionali del Gran Sasso, Italy. In this article we study the experiment's expected sensitivity to the spin-independent WIMP-nucleon interaction cross section, based on Monte Carlo predictions of the electronic and nuclear recoil backgrounds. The total electronic recoil background in 1 tonne fiducial volume and (1, 12) keV electronic recoil equivalent energy region, before applying any selection to discriminate between electronic and nuclear recoils, is (1.80 ± 0.15) · 10(−)(4) (kg·day·keV)(−)(1), mainly due to the decay of (222)Rn daughters inside the xenon target. The nuclear recoil background in the corresponding nuclear recoil equivalent energy region (4, 50) keV, is composed of (0.6 ± 0.1) (t·y)(−)(1) from radiogenic neutrons, (1.8 ± 0.3) · 10(−)(2) (t·y)(−)(1) from coherent scattering of neutrinos, and less than 0.01 (t·y)(−)(1) from muon-induced neutrons. The sensitivity of XENON1T is calculated with the Profile Likelihood Ratio method, after converting the deposited energy of electronic and nuclear recoils into the scintillation and ionization signals seen in the detector. We take into account the systematic uncertainties on the photon and electron emission model, and on the estimation of the backgrounds, treated as nuisance parameters. The main contribution comes from the relative scintillation efficiency Script L(eff), which affects both the signal from WIMPs and the nuclear recoil backgrounds. After a 2 y measurement in 1 t fiducial volume, the sensitivity reaches a minimum cross section of 1.6 · 10(−)(47) cm(2) at m(χ) = 50 GeV/c(2).
580 citations
Authors
Showing all 19133 results
Name | H-index | Papers | Citations |
---|---|---|---|
Pulickel M. Ajayan | 176 | 1223 | 136241 |
Zhenan Bao | 169 | 865 | 106571 |
Murray F. Brennan | 161 | 925 | 97087 |
Ashok Kumar | 151 | 5654 | 164086 |
Joseph R. Ecker | 148 | 381 | 94860 |
Bruce E. Logan | 140 | 591 | 77351 |
Shih-Fu Chang | 130 | 917 | 72346 |
Michael G. Rossmann | 121 | 594 | 53409 |
Richard P. Van Duyne | 116 | 409 | 79671 |
Michael Lynch | 112 | 422 | 63461 |
Angel Rubio | 110 | 930 | 52731 |
Alan Campbell | 109 | 687 | 53463 |
Boris I. Yakobson | 107 | 443 | 45174 |
O. C. Zienkiewicz | 107 | 455 | 71204 |
John R. Reynolds | 105 | 607 | 50027 |