National Physical Laboratory

About: National Physical Laboratory is a facility organization based out in London, United Kingdom. It is known for research contribution in the topics: Dielectric & Thin film. The organization has 7615 authors who have published 13327 publications receiving 319381 citations.

Carbon monoxide sensitivity of vacuum deposited polyaniline semiconducting thin films

Abstract: By utilizing the semiconducting polymeric thin films on various substrates a new simple and quick technique has been developed for sensing carbon monoxide gas The thin films of polyaniline were prepared by vacuum deposition The particular doping combination in the polymer makes the sensor specific for detection of CO Polyaniline was prepared by copolymerization of aniline and formaldehyde Metal halides with specific concentrations were used as dopants to make polyaniline film specific for CO sensing The thickness of the film was measured by using quartz thickness monitor The thickness of the film was found the order of 1000 A Sensitivity of the film is measured by using the relation S=(Ie−Io)/Io, where Ie is current after exposure and Io is the current before exposure the sensor to CO, respectively The sensor, investigated in the environment of various gases as CO, HCN and NH3, showed the high sensitivity of order 800 for carbon monoxide gas and response time of the sensor is 5 s for carbon monoxide gas The fabrication process, the morphological, structural and electrical characterization of the sensor in regard to detection of CO has been described

First experimental proof of Proton Boron Capture Therapy (PBCT) to enhance protontherapy effectiveness

Abstract: Protontherapy is hadrontherapy’s fastest-growing modality and a pillar in the battle against cancer. Hadrontherapy’s superiority lies in its inverted depth-dose profile, hence tumour-confined irradiation. Protons, however, lack distinct radiobiological advantages over photons or electrons. Higher LET (Linear Energy Transfer) 12C-ions can overcome cancer radioresistance: DNA lesion complexity increases with LET, resulting in efficient cell killing, i.e. higher Relative Biological Effectiveness (RBE). However, economic and radiobiological issues hamper 12C-ion clinical amenability. Thus, enhancing proton RBE is desirable. To this end, we exploited the p + 11B → 3α reaction to generate high-LET alpha particles with a clinical proton beam. To maximize the reaction rate, we used sodium borocaptate (BSH) with natural boron content. Boron-Neutron Capture Therapy (BNCT) uses 10B-enriched BSH for neutron irradiation-triggered alpha particles. We recorded significantly increased cellular lethality and chromosome aberration complexity. A strategy combining protontherapy’s ballistic precision with the higher RBE promised by BNCT and 12C-ion therapy is thus demonstrated.

Vacuum-deposited nanocrystalline polyaniline thin film sensors for detection of carbon monoxide

Abstract: Gas sensors based on metal oxide semiconductors are widely used for detection of toxic gases like CO. These sensors suffer from the draw back of limited lifetime due to their operation at high temperatures. On the other hand it is often difficult to achieve high sensitivity, selectivity, and specificity in presence of a mixture of gases. To overcome this, vacuum-deposited nanocrystalline polyaniline thin films have been found suitable for detection of carbon monoxide. The sensors using these films operate at room temperature. A high sensitivity, selectivity, specificity, and a fast response time have been achieved. High sensitivity, selectivity, and specificity are obtained by doping the polyaniline powder during synthesis. These thin film sensors are highly stable, reliable, and their gas detection limit is low.

Advancing Scientific Understanding of the Global Methane Budget in Support of the Paris Agreement

Abstract: The 2015 Paris Agreement of the United Nations Framework Convention on Climate Change aims to keep global average temperature increases well below 2 °C of preindustrial levels in the Year 2100. Vital to its success is achieving a decrease in the abundance of atmospheric methane (CH4), the second most important anthropogenic greenhouse gas. If this reduction is to be achieved, individual nations must make and meet reduction goals in their nationally determined contributions, with regular and independently verifiable global stock taking. Targets for the Paris Agreement have been set, and now the capability must follow to determine whether CH4 reductions are actually occurring. At present, however, there are significant limitations in the ability of scientists to quantify CH4 emissions accurately at global and national scales and to diagnose what mechanisms have altered trends in atmospheric mole fractions in the past decades. For example, in 2007, mole fractions suddenly started rising globally after a decade of almost no growth. More than a decade later, scientists are still debating the mechanisms behind this increase. This study reviews the main approaches and limitations in our current capability to diagnose the drivers of changes in atmospheric CH4 and, crucially, proposes ways to improve this capability in the coming decade. Recommendations include the following: (i) improvements to process‐based models of the main sectors of CH4 emissions—proposed developments call for the expansion of tropical wetland flux measurements, bridging remote sensing products for improved measurement of wetland area and dynamics, expanding measurements of fossil fuel emissions at the facility and regional levels, expanding country‐ specific data on the composition of waste sent to landfill and the types of wastewater treatment systems implemented, characterizing and representing temporal profiles of crop growing seasons, implementing parameters related to ruminant emissions such as animal feed, and improving the detection of small fires associated with agriculture and deforestation; (ii) improvements to measurements of CH4 mole fraction and its isotopic variations—developments include greater vertical profiling at background sites, expanding networks of dense urban measurements with a greater focus on relatively poor countries, improving the precision of isotopic ratio measurements of 13CH4, CH3D, 14CH4, and clumped isotopes, creating isotopic reference materials for international‐scale development, and expanding spatial and temporal characterization of isotopic source signatures; and (iii) improvements to inverse modeling systems to derive emissions from atmospheric measurements—advances are proposed in the areas of hydroxyl radical quantification, in systematic uncertainty quantification through validation of chemical transport models, in the use of source tracers for estimating sector‐level emissions, and in the development of time and spaceresolved national inventories. These and other recommendations are proposed for the major areas of CH4 science with the aim of improving capability in the coming decade to quantify atmospheric CH4 budgets on the scales necessary for the success of climate policies. Plain Language Summary Methane is the second largest contributor to climate warming from human activities since preindustrial times. Reducing human‐made emissions by half is a major component of the 2015 Paris Agreement target to keep global temperature increases well below 2 °C. In parallel to the methane emission reductions pledged by individual nations, new capabilities are needed to determine independently whether these reductions are actually occurring and whether methane concentrations in the atmosphere are changing for reasons that are clearly understood. At present significant challenges limit the ability of scientists to identify the mechanisms causing changes in atmospheric methane. This study reviews current and emerging tools in methane science and proposes major advances needed in the coming decade to achieve this crucial capability. We recommend further developing the models that simulate the processes behind methane emissions, improving atmospheric measurements of methane and its major carbon and hydrogen isotopes, and advancing abilities to infer the rates of methane being emitted and removed from the atmosphere from these measurements. The improvements described here will play a major role in assessing emissions commitments as more cities, states, and countries report methane emission inventories and commit to specific emission reduction targets.