Journal ArticleDOI
Biocomposites reinforced with natural fibers: 2000–2010
TLDR
A comprehensive review of literature on bio-fiber reinforced composites is presented in this paper, where the overall characteristics of reinforcing fibers used in biocomposites, including source, type, structure, composition, as well as mechanical properties, are reviewed.About:
This article is published in Progress in Polymer Science.The article was published on 2012-11-01. It has received 3074 citations till now. The article focuses on the topics: Biocomposite & Transfer molding.read more
Citations
More filters
Journal ArticleDOI
Analysis of curaua/glass hybrid interlayer laminates
Clarissa Coussirat Angrizani,Maria Odila Hilário Cioffi,Ademir J. Zattera,Sandro Campos Amico +3 more
TL;DR: In this article, the authors compared the mechanical properties of curaua, glass and hybrid laminates evaluated experimentally with those obtained theoretically using commercial software for composites, and found that the combination of curaoa and glass fibers produced a material with intermediate properties, depending on the type of mechanical loading and the stacking sequence.
Journal ArticleDOI
Natural fiber reinforced non-asbestos brake friction composites: Influence of ramie fiber on physico-mechanical and tribological properties
Journal ArticleDOI
Recent Advances in the Development of Fire-Resistant Biocomposites—A Review
E. W. Madyaratri,Muhammad Rasyidur Ridho,Manggar Arum Aristri,Muhammad Adly Rahandi Lubis,Apri Heri Iswanto,Deded Sarip Nawawi,Petar Antov,Ľuboš Krišťák,Andrea Majlingová,Widya Fatriasari +9 more
TL;DR: In this paper , the potential of lignin as an eco-friendly and low-cost flame-retardant additive to produce high-performance biocomposites with improved technological and fire properties was discussed in detail.
Journal ArticleDOI
Weibull distribution analysis of the tensile strength of the kenaf bast fiber
Dayakar L. Naik,Thomas H. Fronk +1 more
TL;DR: In this article, the influence of the gage length on the kenaf fiber Young's modulus and the tensile strength characterization is presented, which is performed at a quasi-static loading rate of 1 mm/min.
Journal ArticleDOI
Mechanical properties, biocompatibility, and biodegradation of cross-linked cellulose acetate-reinforced polyester composites.
TL;DR: The PHA/CA and PHA-g-AA/t-CA composites were more biodegradable than pure PHA, implying a strong connection between cellulose acetate content andBiodegradability.
References
More filters
Journal ArticleDOI
Composites reinforced with cellulose based fibres
TL;DR: In this article, a survey about physical and chemical treatment methods which improve the fiber matrix adhesion, their results and effects on the physical properties of composites is presented, and the influence of such treatments by taking into account fibre content on the creep, quasi-static, cyclic dynamic and impact behaviour of natural fibre reinforced plastics are discussed in detail.
Journal ArticleDOI
Biofibres, biodegradable polymers and biocomposites: An overview
TL;DR: The structural aspects and properties of several biofibers and biodegradable polymers, recent developments of different biofiber and biocomposites are discussed in this paper.
Journal ArticleDOI
Natural fibres: can they replace glass in fibre reinforced plastics?
TL;DR: In this paper, natural fibres (sisal, kenaf, hemp, jute and coir) reinforced polypropylene composites were processed by compression molding using a film stacking method.
Natural fibres: Can they replace glass in fibre reinforced plastics ?
TL;DR: In this article, natural fibres (sisal, kenaf, hemp, jute and coir) reinforced polypropylene composites were processed by compression molding using a film stacking method.
Journal ArticleDOI
Biofibres and Biocomposites
Maya Jacob John,Sabu Thomas +1 more
TL;DR: A review of the literature on the various aspects of cellulosic fibres and biocomposites can be found in this paper, where the pros and cons of using these fibres are enumerated in this review.