scispace - formally typeset
Journal ArticleDOI

A high-speed silicon optical modulator based on a metal–oxide–semiconductor capacitor

TLDR
An approach based on a metal–oxide–semiconductor (MOS) capacitor structure embedded in a silicon waveguide that can produce high-speed optical phase modulation is described and an all-silicon optical modulator with a modulation bandwidth exceeding 1 GHz is demonstrated.
Abstract
Silicon has long been the optimal material for electronics, but it is only relatively recently that it has been considered as a material option for photonics1. One of the key limitations for using silicon as a photonic material has been the relatively low speed of silicon optical modulators compared to those fabricated from III–V semiconductor compounds2,3,4,5,6 and/or electro-optic materials such as lithium niobate7,8,9. To date, the fastest silicon-waveguide-based optical modulator that has been demonstrated experimentally has a modulation frequency of only ∼20 MHz (refs 10, 11), although it has been predicted theoretically that a ∼1-GHz modulation frequency might be achievable in some device structures12,13. Here we describe an approach based on a metal–oxide–semiconductor (MOS) capacitor structure embedded in a silicon waveguide that can produce high-speed optical phase modulation: we demonstrate an all-silicon optical modulator with a modulation bandwidth exceeding 1 GHz. As this technology is compatible with conventional complementary MOS (CMOS) processing, monolithic integration of the silicon modulator with advanced electronics on a single silicon substrate becomes possible.

read more

Citations
More filters
Patent

System and method for Uniform Multi-Plane Silicon Oxide Layer Formation for Optical Applications

TL;DR: In this article, a first layer of oxide is removed from the first facet and a second layer is grown on the first and second facets, with the first layer having a faster oxide growth rate.
Journal ArticleDOI

Silicon waveguide sidewall smoothing by resist reflowing

TL;DR: In this paper, a chip-upending method was proposed to reflow the resist and reduce the line edge roughness of submicron single mode waveguide, which was shown to be adaptable for different resist materials.
Journal ArticleDOI

Effects of processing parameters on green synthesised ZnO nanoparticles using stem extract of Swertia chirayita

TL;DR: In this paper, three different synthesis methods namely, Sonication, Wet-chemical and Hydrothermal methods were used in the development of ZnO nanoparticles, due to its simple and easily scalable attribute.
Journal ArticleDOI

Optomechanical cooling by STIRAP-assisted energy transfer: an alternative route towards the mechanical ground state

TL;DR: In this article, the authors describe a protocol to cool a mechanical resonator coupled to a driven optical mode in an optomechanical cavity, which is also coupled to an optical modes in another auxiliary optical cavity, and both the cavities are frequency modulated.
Journal ArticleDOI

Tunable fast and slow light in a traveling wave microresonator via interaction of intra-cavity backscattering with dual contrapropagating inputs

TL;DR: In this paper, the interplay between the intra-cavity backscattering and the losses out of the cavity when dual contra-propagating inputs are launched into a traveling wave microresonator is investigated.
References
More filters
Proceedings Article

Physics of semiconductor devices

S. M. Sze
Journal ArticleDOI

Electrooptical effects in silicon

TL;DR: In this article, a numerical Kramers-Kronig analysis is used to predict the refractive index perturbations produced in crystalline silicon by applied electric fields or by charge carriers.
Journal ArticleDOI

A review of lithium niobate modulators for fiber-optic communications systems

TL;DR: The lithium-niobate external-modulator technology meets the performance and reliability requirements of current 2.5-, 10-Gb/s digital communication systems, as well as CATV analog systems, and multiple high-speed modulation functions have been achieved in a single device.
Journal ArticleDOI

Silicon-based optoelectronics

TL;DR: In this article, a review of Si-based photonic components and optoelectronic integration techniques, both hybrid and monolithic, is presented, with a focus on column IV materials (Si, Ge, C and Sn).
Related Papers (5)