scispace - formally typeset
Journal ArticleDOI

A high-speed silicon optical modulator based on a metal–oxide–semiconductor capacitor

TLDR
An approach based on a metal–oxide–semiconductor (MOS) capacitor structure embedded in a silicon waveguide that can produce high-speed optical phase modulation is described and an all-silicon optical modulator with a modulation bandwidth exceeding 1 GHz is demonstrated.
Abstract
Silicon has long been the optimal material for electronics, but it is only relatively recently that it has been considered as a material option for photonics1. One of the key limitations for using silicon as a photonic material has been the relatively low speed of silicon optical modulators compared to those fabricated from III–V semiconductor compounds2,3,4,5,6 and/or electro-optic materials such as lithium niobate7,8,9. To date, the fastest silicon-waveguide-based optical modulator that has been demonstrated experimentally has a modulation frequency of only ∼20 MHz (refs 10, 11), although it has been predicted theoretically that a ∼1-GHz modulation frequency might be achievable in some device structures12,13. Here we describe an approach based on a metal–oxide–semiconductor (MOS) capacitor structure embedded in a silicon waveguide that can produce high-speed optical phase modulation: we demonstrate an all-silicon optical modulator with a modulation bandwidth exceeding 1 GHz. As this technology is compatible with conventional complementary MOS (CMOS) processing, monolithic integration of the silicon modulator with advanced electronics on a single silicon substrate becomes possible.

read more

Citations
More filters
Journal ArticleDOI

Model Analysis of Ridge and Rib Types of Silicon Waveguides With Void Compositions

TL;DR: In this article, a detailed numerical study on mode characteristics and light confinement properties of rectangular ridge and rib waveguides with vertical, horizontal, and cross types of void configurations is presented.
Journal ArticleDOI

Design and Fabrication of 1 × 2 Nanophotonic Switch

TL;DR: In this paper, the authors presented the design and fabrication of a novel 1×2 nanophotonic switch, which is a photonic T-junction in which a gold nano particle is being positioned in the junction using the tip of an atomic force microscope (AFM).
Journal ArticleDOI

Wafer-Testing of Optoelectonic–Gigascale CMOS Integrated Circuits

TL;DR: In this paper, two probe substrate technologies based on microelectromechanical systems (MEMS) for simultaneously interfacing with a multitude of surface-normal optical I/Os and high-density electrical I/O are detailed.
Proceedings ArticleDOI

Experimental demonstration of directive Si 3 N 4 optical leaky wave antennas with semiconductor perturbations at near infrared frequencies

TL;DR: In this article, the authors experimentally demonstrate directive radiation from a silicon nitride (Si3N4) waveguide-based directive optical leaky wave antennas (OLWAs) with tunable radiation pattern.
Proceedings ArticleDOI

Large Electro-Optic Effect in Tensile Strained Ge-on-Si Films

TL;DR: In this paper, an enhanced electro-optic effect in the weakly absorbing regime for tensile strained Ge epitaxial films was observed. But this effect was only applied to a tensile-strained Gaussian mixture with Deltan/F=260 pm/V and Deltaalpha/alpha-3.
References
More filters
Proceedings Article

Physics of semiconductor devices

S. M. Sze
Journal ArticleDOI

Electrooptical effects in silicon

TL;DR: In this article, a numerical Kramers-Kronig analysis is used to predict the refractive index perturbations produced in crystalline silicon by applied electric fields or by charge carriers.
Journal ArticleDOI

A review of lithium niobate modulators for fiber-optic communications systems

TL;DR: The lithium-niobate external-modulator technology meets the performance and reliability requirements of current 2.5-, 10-Gb/s digital communication systems, as well as CATV analog systems, and multiple high-speed modulation functions have been achieved in a single device.
Journal ArticleDOI

Silicon-based optoelectronics

TL;DR: In this article, a review of Si-based photonic components and optoelectronic integration techniques, both hybrid and monolithic, is presented, with a focus on column IV materials (Si, Ge, C and Sn).
Related Papers (5)