Ghulam Ishaq Khan Institute of Engineering Sciences and Technology

About: Ghulam Ishaq Khan Institute of Engineering Sciences and Technology is a education organization based out in Topi, Pakistan. It is known for research contribution in the topics: Thin film & Quantum efficiency. The organization has 618 authors who have published 940 publications receiving 10674 citations.

Sensitivity enhancement of OD- and OD-CNT-based humidity sensors by high gravity thin film deposition technique

Abstract: The humidity sensing properties of the thin films of an organic semiconductor material orange dye (OD) and its composite with CNTs deposited at high gravity conditions have been reported. Impedance, phase angle, capacitance and dissipation of the samples were measured at 1 kHz and room temperature conditions. The impedance decreases and capacitance increases with an increase in the humidity level. It was found that the sensitivity of the OD-based thin film samples deposited at high gravity condition is higher than the samples deposited at low gravity condition. The impedances and capacitance sensitivities of the of the samples deposited under high gravity condition are 6.1 times and 1.6 times higher than the films deposited under low gravity condition.

A novel formulation of 3D Jeffery fluid flow near an irregular permeable surface having chemical reactive species

Abstract: The main objective of this paper is to offer a comprehensive study regarding solar radiation and MHD effects on 3D boundary layer Jeffery fluid flow over a non-uniform stretched sheet along with va...

Evaluation of Bentonite Mixed Indigenous Clays for Development of Clay Liners

Abstract: This study presents experimental investigation of indigenous clays mixed with Bentonite to assess their suitability in potential use as clay liners. Soil samples with 0, 4, 8, and 12% Bentonite content from three different sites in Peshawar region were tested for various geotechnical properties. Grain size distribution, specific gravity, Atterberg limits and free swell were found through laboratory tests using appropriate ASTM procedures. Maximum dry density and optimum moisture content were calculated using Atterberg limits in available relationships. Finally, one dimensional consolidation tests were conducted to find relevant parameters for calculating hydraulic conductivity. A decrease in specific gravity, increase in free swell, and in optimum moisture content, decline in maximum dry density and hydraulic conductivity was observed with increase in Bentonite content across all three soil samples. During free swell, the soil clusters become larger leading to formation of floccules resulting in the narrowing of inter-particle space and thus blocking of permeable paths. It is concluded that 8% Bentonite content by weight yields a suitable mixture for a clay liner that has hydraulic conductivity in the range of recommended limits.

A cross organisation compatible workflows generation and execution framework

Abstract: With the development of the Internet, the demand for electronic and online commerce has increased. This has, in turn, increased the demand for business process automation. In this paper, we look at the use of workflows for business process automation. An automatically generated workflow can save time and resources needed for running online businesses. In general, due to the interdependencies between their activities, multiple business organisations will need to work together by collaborating and coordinating their activities with each other. This gives rise to the need for workflow collaboration across organisations. Current systems for workflow collaboration are only capable of reconciling existing workflows of the collaborating organisations. Automatic workflow generation systems only generate workflows for individual organisations and cannot handle the automatic generation of compatible workflows for multiple collaborating organisations. To overcome this problem, in this paper, we present a framework that is able to generate multiple sets of compatible workflows for multiple collaborating organisations. The proposed framework supports runtime enactment and runtime collaboration of the generated workflows. This framework enables users to save the time and resources that would otherwise be spent in modelling, reconciling and reengineering workflows.