Showing papers by "Waseda University published in 2013"

The second fermi large area telescope catalog of gamma-ray pulsars

Abstract: This catalog summarizes 117 high-confidence > 0.1 GeV gamma-ray pulsar detections using three years of data acquired by the Large Area Telescope (LAT) on the Fermi satellite. Half are neutron stars discovered using LAT data, through periodicity searches in gamma-ray and radio data around LAT unassociated source positions. The 117 pulsars are evenly divided into three groups: millisecond pulsars, young radio-loud pulsars, and young radio-quiet pulsars. We characterize the pulse profiles and energy spectra and derive luminosities when distance information exists. Spectral analysis of the off-peak phase intervals indicates probable pulsar wind nebula emission for four pulsars, and off-peak magnetospheric emission for several young and millisecond pulsars. We compare the gamma-ray properties with those in the radio, optical, and X-ray bands. We provide flux limits for pulsars with no observed gamma-ray emission, highlighting a small number of gamma-faint, radio-loud pulsars. The large, varied gamma-ray pulsar sample constrains emission models. Fermi's selection biases complement those of radio surveys, enhancing comparisons with predicted population distributions.

Detection of the characteristic pion-decay signature in supernova remnants

Abstract: Cosmic rays are particles (mostly protons) accelerated to relativistic speeds. Despite wide agreement that supernova remnants (SNRs) are the sources of galactic cosmic rays, unequivocal evidence for the acceleration of protons in these objects is still lacking. When accelerated protons encounter interstellar material, they produce neutral pions, which in turn decay into gamma rays. This offers a compelling way to detect the acceleration sites of protons. The identification of pion-decay gamma rays has been difficult because high-energy electrons also produce gamma rays via bremsstrahlung and inverse Compton scattering. We detected the characteristic pion-decay feature in the gamma-ray spectra of two SNRs, IC 443 and W44, with the Fermi Large Area Telescope. This detection provides direct evidence that cosmic-ray protons are accelerated in SNRs.

A new family of carbon materials: synthesis of MOF-derived nanoporous carbons and their promising applications

Abstract: Nanoporous carbons possessing high surface area and narrow pore size distribution are among the most important classes of porous materials that are practically utilized in industries. Recently, several metal-organic frameworks (MOFs) or porous coordination polymers (PCPs) have been demonstrated as promising precursors to create functional nanoporous carbons. In this highlight article, we briefly review the recent progress in preparation of these novel MOF-derived nanoporous carbons. Some promising applications in energy and environment-related areas and future outlook are also discussed.

New Constraint on the Existence of the μ + → e + γ Decay

Abstract: The analysis of a combined data set, totaling $3.6\ifmmode\times\else\texttimes\fi{}{10}^{14}$ stopped muons on target, in the search for the lepton flavor violating decay ${\ensuremath{\mu}}^{+}\ensuremath{\rightarrow}{e}^{+}\ensuremath{\gamma}$ is presented. The data collected by the MEG experiment at the Paul Scherrer Institut show no excess of events compared to background expectations and yield a new upper limit on the branching ratio of this decay of $5.7\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}13}$ (90% confidence level). This represents a four times more stringent limit than the previous world best limit set by MEG.

Chelyabinsk airburst, damage assessment, meteorite recovery, and characterization

Abstract: The asteroid impact near the Russian city of Chelyabinsk on 15 February 2013 was the largest airburst on Earth since the 1908 Tunguska event, causing a natural disaster in an area with a population exceeding one million. Because it occurred in an era with modern consumer electronics, field sensors, and laboratory techniques, unprecedented measurements were made of the impact event and the meteoroid that caused it. Here, we document the account of what happened, as understood now, using comprehensive data obtained from astronomy, planetary science, geophysics, meteorology, meteoritics, and cosmochemistry and from social science surveys. A good understanding of the Chelyabinsk incident provides an opportunity to calibrate the event, with implications for the study of near-Earth objects and developing hazard mitigation strategies for planetary protection.

Oral Corrective Feedback in Second Language Classrooms.

Abstract: This article reviews research on oral corrective feedback (CF) in second language (L2) classrooms. Various types of oral CF are first identified, and the results of research revealing CF frequency across instructional contexts are presented. Research on CF preferences is then reviewed, revealing a tendency for learners to prefer receiving CF more than teachers feel they should provide it. Next, theoretical perspectives in support of CF are presented and some contentious issues addressed related to the role of learner uptake, the role of instruction, and the overall purpose of CF: to initiate the acquisition of new knowledge or to consolidate already acquired knowledge. A brief review of laboratory studies assessing the effects of recasts is then presented before we focus on classroom studies assessing the effects of different types of CF. Many variables mediate CF effectiveness: of these, we discuss linguistic targets and learners' age in terms of both previous and prospective research. Finally, CF provided by learners and the potential benefits of strategy training for strengthening the role of CF during peer interaction are highlighted.

Polyhedral Oligosilsesquioxane‐Modified Boron Nitride Nanotube Based Epoxy Nanocomposites: An Ideal Dielectric Material with High Thermal Conductivity

Abstract: Dielectric polymer composites with high thermal conductivity are very promising for microelectronic packaging and thermal management application in new energy systems such as solar cells and light emitting diodes (LEDs). However, a well-known paradox is that conventional composites with high thermal conductivity usually suffer from the high dielectric constant and high dielectric loss, while on the other hand, composite materials with excellent dielectric properties usually possess low thermal conductivity. In this work, an ideal dielectric thermally conductive epoxy nanocomposite is successfully fabricated using polyhedral oligosilsesquioxane (POSS) functionalized boron nitride nanotubes (BNNTs) as fillers. The nanocomposites with 30 wt% fraction of POSS modified BNNTs exhibit much lower dielectric constant, dielectric loss tangent, and coefficient of thermal expansion in comparison with the pure epoxy resin. As an example, below 100 Hz, the dielectric loss of the nanocomposites with 20 and 30 wt% BNNTs is reduced by one order of magnitude in comparison with the pure epoxy resin. Moreover, the nanocomposites show a dramatic thermal conductivity enhancement of 1360% in comparison with the pristine epoxy resin at a BNNT loading fraction of 30 wt%. The merits of the designed composites are suggested to originate from the excellent intrinsic properties of embedded BNNTs, effective surface modification by POSS molecules, and carefully developed composite preparation methods.

Improved luminosity determination in pp collisions at root s=7 TeV using the ATLAS detector at the LHC

Abstract: The luminosity calibration for the ATLAS detector at the LHC during pp collisions at root s = 7 TeV in 2010 and 2011 is presented. Evaluation of the luminosity scale is performed using several luminosity-sensitive detectors, and comparisons are made of the long-term stability and accuracy of this calibration applied to the pp collisions at root s = 7 TeV. A luminosity uncertainty of delta L/L = +/- 3.5 % is obtained for the 47 pb(-1) of data delivered to ATLAS in 2010, and an uncertainty of delta L/L = +/- 1.8 % is obtained for the 5.5 fb(-1) delivered in 2011.

Functions and mechanics of dynein motor proteins

Abstract: Fuelled by ATP hydrolysis, dyneins generate force and movement on microtubules in a wealth of biological processes, including ciliary beating, cell division and intracellular transport. The large mass and complexity of dynein motors have made elucidating their mechanisms a sizable task. Yet, through a combination of approaches, including X-ray crystallography, cryo-electron microscopy, single-molecule assays and biochemical experiments, important progress has been made towards understanding how these giant motor proteins work. From these studies, a model for the mechanochemical cycle of dynein is emerging, in which nucleotide-driven flexing motions within the AAA+ ring of dynein alter the affinity of its microtubule-binding stalk and reshape its mechanical element to generate movement.

Observation of Associated Near-Side and Away-Side Long-Range Correlations in √sNN=5.02 TeV Proton-Lead Collisions with the ATLAS Detector

Abstract: Two-particle correlations in relative azimuthal angle (Delta phi) and pseudorapidity (Delta eta) are measured in root S-NN = 5.02 TeV p + Pb collisions using the ATLAS detector at the LHC. The measurements are performed using approximately 1 mu b(-1) of data as a function of transverse momentum (p(T)) and the transverse energy (Sigma E-T(Pb)) summed over 3.1 < eta < 4.9 in the direction of the Pb beam. The correlation function, constructed from charged particles, exhibits a long-range (2 < vertical bar Delta eta vertical bar < 5) "near-side" (Delta phi similar to 0) correlation that grows rapidly with increasing Sigma E-T(Pb). A long-range "away-side" (Delta phi similar to pi) correlation, obtained by subtracting the expected contributions from recoiling dijets and other sources estimated using events with small Sigma E-T(Pb), is found to match the near-side correlation in magnitude, shape (in Delta eta and Delta phi) and Sigma E-T(Pb) dependence. The resultant Delta phi correlation is approximately symmetric about pi/2, and is consistent with a dominant cos2 Delta phi modulation for all Sigma E-T(Pb) ranges and particle p(T).

Metallic nanocages: synthesis of bimetallic Pt-Pd hollow nanoparticles with dendritic shells by selective chemical etching.

Abstract: We report a facile synthesis of Pt–Pd bimetallic nanoparticles, named “metallic nanocages”, with a hollow interior and porous dendritic shell. This synthesis is easily achieved by selective chemical etching of Pd cores from dendritic Pt-on-Pd nanoparticles. The obtained Pt–Pd nanocages show superior catalytic activity for methanol oxidation reaction compared to other Pt-based materials reported previously.

Clay mineral-organic interactions

Abstract: Organic compounds can interact with clay minerals by i) adsorption at the external surfaces, ii) adsorption at the external and internal surfaces, iii) by exchange of exchangeable ions at the external surfaces, iv) by exchange of exchangeable ions at the external and internal surfaces, and v) by grafting reactions with silanol and aluminol groups leading to covalent bonds. Kaolin minerals intercalate only are a limited number of compounds whereas the reactions of 2:1 clay minerals, in particular smectites and vermiculites, are very manifold. Special attention is given to the interaction with neutral organic molecules such as alcohols, fatty acids, amines, amino acids, aromatic compounds, macrocyclic compounds, and nuclein bases. The interaction with complexes and dyes also provides the basis of advanced applications of clay minerals. Binding of long chain alkylammonium ions is a fundamental reaction for hydrophobising clay mineral particles as needed in many applications. The interaction of clay minerals with polymers including proteins is not only an actual field of research but also of practical importance. Organo-clay minerals are used as effective adsorbents. As these materials also adsorb solvent molecules together with the adsorptive, the adsorption process must be considered as adsorption from binary solution which, therefore, is also described in this chapter.

25th anniversary article: what can be done with the Langmuir-Blodgett method? Recent developments and its critical role in materials science.

Abstract: The Langmuir-Blodgett (LB) technique is known as an elegant method for fabrication of well-defined layered structures with molecular level precision. Since its discovery the LB method has made an indispensable contribution to surface science, physical chemistry, materials chemistry and nanotechnology. However, recent trends in research might suggest the decline of the LB method as alternate methods for film fabrication such as layer-by-layer (LbL) assembly have emerged. Is LB film technology obsolete? This review is presented in order to challenge this preposterous question. In this review, we summarize recent research on LB and related methods including (i) advanced design for LB films, (ii) LB film as a medium for supramolecular chemistry, (iii) LB technique for nanofabrication and (iv) LB involving advanced nanomaterials. Finally, a comparison between LB and LbL techniques is made. The latter reveals the crucial role played by LB techniques in basic surface science, current advanced material sciences and nanotechnologies.

In vitro fabrication of functional three-dimensional tissues with perfusable blood vessels

Abstract: In vitro fabrication of functional vascularized three-dimensional tissues has been a long-standing objective in the field of tissue engineering. Here we report a technique to engineer cardiac tissues with perfusable blood vessels in vitro. Using resected tissue with a connectable artery and vein as a vascular bed, we overlay triple-layer cardiac cell sheets produced from coculture with endothelial cells, and support the tissue construct with media perfused in a bioreactor. We show that endothelial cells connect to capillaries in the vascular bed and form tubular lumens, creating in vitro perfusable blood vessels in the cardiac cell sheets. Thicker engineered tissues can be produced in vitro by overlaying additional triple-layer cell sheets. The vascularized cardiac tissues beat and can be transplanted with blood vessel anastomoses. This technique may create new opportunities for in vitro tissue engineering and has potential therapeutic applications.

Progress in thermal comfort research over the last twenty years

Abstract: Climate change and the urgency of decarbonizing the built environment are driving technological innovation in the way we deliver thermal comfort to occupants. These changes, in turn, seem to be setting the directions for contemporary thermal comfort research. This article presents a literature review of major changes, developments, and trends in the field of thermal comfort research over the last 20 years. One of the main paradigm shift was the fundamental conceptual reorientation that has taken place in thermal comfort thinking over the last 20 years; a shift away from the physically based determinism of Fanger's comfort model toward the mainstream and acceptance of the adaptive comfort model. Another noticeable shift has been from the undesirable toward the desirable qualities of air movement. Additionally, sophisticated models covering the physics and physiology of the human body were developed, driven by the continuous challenge to model thermal comfort at the same anatomical resolution and to combine these localized signals into a coherent, global thermal perception. Finally, the demand for ever increasing building energy efficiency is pushing technological innovation in the way we deliver comfortable indoor environments. These trends, in turn, continue setting the directions for contemporary thermal comfort research for the next decades.

The First FERMI-LAT Gamma-Ray Burst Catalog

Abstract: In three years of observations since the beginning of nominal science operations in August 2008, the Large Area Telescope (LAT) on board the Fermi Gamma Ray Space Telescope has observed high-energy (>20 MeV) \gamma-ray emission from 35 gamma-ray bursts (GRBs). Among these, 28 GRBs have been detected above 100 MeV and 7 GRBs above ~ 20 MeV. The first Fermi-LAT catalog of GRBs is a compilation of these detections and provides a systematic study of high-energy emission from GRBs for the first time. To generate the catalog, we examined 733 GRBs detected by the Gamma-Ray Burst Monitor (GBM) on Fermi and processed each of them using the same analysis sequence. Details of the methodology followed by the LAT collaboration for GRB analysis are provided. We summarize the temporal and spectral properties of the LAT-detected GRBs. We also discuss characteristics of LAT-detected emission such as its delayed onset and longer duration compared to emission detected by the GBM, its power-law temporal decay at late times, and the fact that it is dominated by a power-law spectral component that appears in addition to the usual Band model.

Enzyme nanoarchitectonics: organization and device application

Abstract: Fabrication of ultrasmall functional machines and their integration within ultrasmall areas or volumes can be useful for creation of novel technologies. The ultimate goal of the development of ultrasmall machines and device systems is to construct functional structures where independent molecules operate as independent device components. To realize exotic functions, use of enzymes in device structures is an attractive solution because enzymes can be regarded as efficient machines possessing high reaction efficiencies and specificities and can operate even under ambient conditions. In this review, recent developments in enzyme immobilization for advanced functions including device applications are summarized from the viewpoint of micro/nano-level structural control, or nanoarchitectonics. Examples are roughly classified as organic soft matter, inorganic soft materials or integrated/organized media. Soft matter such as polymers and their hybrids provide a medium appropriate for entrapment and encapsulation of enzymes. In addition, self-immobilization based on self-assembly and array formation results in enzyme nanoarchitectures with soft functions. For the confinement of enzymes in nanospaces, hard inorganic mesoporous materials containing well-defined channels play an important role. Enzymes that are confined exhibit improved stability and controllable arrangement, which are useful for formation of functional relays and for their integration into artificial devices. Layer-by-layer assemblies as well as organized lipid assemblies such as Langmuir–Blodgett films are some of the best media for architecting controllable enzyme arrangements. The ultrathin forms of these films facilitate their connection with external devices such as electrodes and transistors. Artificial enzymes and enzyme-mimicking catalysts are finally briefly described as examples of enzyme functions involving non-biological materials. These systems may compensate for the drawbacks of natural enzymes, such as their instabilities under harsh conditions. We believe that enzymes and their mimics will be freely coupled, organized and integrated upon demand in near future technologies.

Comparative marker analysis of extracellular vesicles in different human cancer types

Abstract: Several cell types, including tumour cells, secrete extracellular vesicles (EVs), and tumour-derived EVs play a role in cancer initiation and progression. These vesicles include both a common set of membrane and cytosolic proteins and origin-specific subsets of proteins that likely correlated to cell type–associated functions. To confirm the presence of EVs in the preparations, researchers have identified so-called EV marker proteins, including the tetraspanin family proteins and such cytosolic proteins as heat shock 70 kDa protein 4 (HSP70) and tumour susceptibility gene 101 (TSG101). However, studies have shown that some EV markers are not always present in all EVs, which not only complicates the identification of EVs but also precludes the quantitative evaluation of EV proteins. Thus, it is strongly required to explore well-conserved EV marker proteins that are present at similar levels, regardless of their tissue or cellular origin. In this study, we compared the presence of 11 well-known EV marker proteins by immunoblotting using EVs isolated from 4 human prostate cell lines and 5 human breast cell lines, including cancer cells with different phenotypes. We found that all the tested EVs were positive for CD9 and CD81, with similar abundance that was irrespective of the EV origin. In contrast, other EV marker proteins, such as TSG101, Rab-5b and CD63, were detected in an inconsistent manner, depending on the origin of the EVs. Thus, we propose that the detection of CD9 and/or CD81 should ensure the presence of EVs. Keywords: extracellular vesicle marker; prostate cancer cells; breast cancer cells; CD9; CD81 (Published: 18 June 2013) Citation: Journal of Extracellular Vesicles 2013, 2: 20424 - http://dx.doi.org/10.3402/jev.v2i0.20424 To access the supplementary material to this article, please see Supplementary files under Article Tools online.

Recent Advances in Iridium-Catalyzed Alkylation of C–H and N–H Bonds

Abstract: Over the past few years, iridium complexes have been widely used in the direct functionalization of unactivated bonds. In the presence of iridium catalysts, inactive C–H and N–H bonds have been transformed into C–C and N–C bonds in dehydrative alkylation using alcohols, allylation using allyl carbonates, and alkylation using alkenes. Enantioselective variants of some reactions have also been reported.

The Cosmic-Ray Energy Spectrum Observed with the Surface Detector of the Telescope Array Experiment

Abstract: The Telescope Array experiment is supported by the Japan Society for the Promotion of Science through Grants-in-Aids for Scientific Research on Specially Promoted Research (21000002) "Extreme Phenomena in the Universe Explored by Highest Energy Cosmic Rays" and for Scientific Research (S) (19104006), and the Inter-University Research Program of the Institute for Cosmic Ray Research; by the U.S. National Science Foundation awards PHY-0307098, PHY-0601915, PHY-0703893, PHY-0758342, and PHY-0848320 (Utah), and PHY-0649681 (Rutgers); by the National Research Foundation of Korea (2006-0050031, 2007-0056005, 2007-0093860, 2010-0011378, 2010-0028071, R32-10130, 2011-0002617); by the Russian Academy of Sciences, RFBR grants 10-02-01406a and 11-02-01528a (INR), IISN project No. 4.4509.10 and Belgian Science Policy under IUAP VI/11 (ULB). The foundations of Dr. Ezekiel R. and Edna Wattis Dumke, Willard L. Eccles and the George S. and Dolores Dore Eccles all helped with generous donations. The State of Utah supported the project through its Economic Development Board, and the University of Utah through the Office of the Vice President for Research. The experimental site became available through the cooperation of the Utah School and Institutional Trust Lands Administration (SITLA), U. S. Bureau of Land Management, and the U. S. Air Force. We also thank the people and the officials of Millard County, Utah for their steadfast and warm support. We gratefully acknowledge the contributions from the technical staffs of our home institutions. An allocation of computer time from the Center for High Performance Computing at the University of Utah is gratefully acknowledged.

Low-cost fully transparent ultraviolet photodetectors based on electrospun ZnO-SnO2 heterojunction nanofibers

Abstract: Electrospun ZnO-SnO2 heterojunction nanofibers are demonstrated to be promising candidates for easily assembled fully transparent high-performance photodetectors.

Electrochemical Synthesis of One‐Dimensional Mesoporous Pt Nanorods Using the Assembly of Surfactant Micelles in Confined Space

Abstract: of metals affords electrocatalystsshowing a superior performance because of their highporosity, large area per unit volume, and excellent activity–structure relationship. Therefore, the successful synthesis of1D mesoporous Pt motifs can be expected to be a newdirection in the fabrication of superior electrocatalysts. Thetraditional hard-templating method, which is widely used tosynthesize mesoporous carbon materials,

Quadrupole anisotropy in dihadron azimuthal correlations in central d+Au collisions at √sNN=200 GeV

Abstract: The PHENIX collaboration at the Relativistic Heavy Ion Collider (RHIC) reports measurements of azimuthal dihadron correlations near midrapidity in d + Au collisions at root s(NN) = 200 GeV. These measurements complement recent analyses by experiments at the Large Hadron Collider (LHC) involving central p + Pb collisions at root s(NN) = 5.02 TeV, which have indicated strong anisotropic long-range correlations in angular distributions of hadron pairs. The origin of these anisotropies is currently unknown. Various competing explanations include parton saturation and hydrodynamic flow. We observe qualitatively similar, but larger, anisotropies in d + Au collisions at RHIC compared to those seen in p + Pb collisions at the LHC. The larger extracted upsilon(2) values in d + Au are consistent with expectations from hydrodynamic calculations owing to the larger expected initial-state eccentricity compared with that from p + Pb collisions. When both are divided by an estimate of the initial-state eccentricity the scaled anisotropies follow a common trend with multiplicity that may extend to heavy ion data at RHIC and the LHC, where the anisotropies are widely thought to arise from hydrodynamic flow.

In vitro engineering of vascularized tissue surrogates

Abstract: In vitro scaling up of bioengineered tissues is known to be limited by diffusion issues, specifically a lack of vasculature. Here, we report a new strategy for preserving cell viability in three-dimensional tissues using cell sheet technology and a perfusion bioreactor having collagen-based microchannels. When triple-layer cardiac cell sheets are incubated within this bioreactor, endothelial cells in the cell sheets migrate to vascularize in the collagen gel, and finally connect with the microchannels. Medium readily flows into the cell sheets through the microchannels and the newly developed capillaries, while the cardiac construct shows simultaneous beating. When additional triple-layer cell sheets are repeatedly layered, new multi-layer construct spontaneously integrates and the resulting construct becomes a vascularized thick tissue. These results confirmed our method to fabricate in vitro vascularized tissue surrogates that overcomes engineered-tissue thickness limitations. The surrogates promise new therapies for damaged organs as well as new in vitro tissue models.