Institution
Nanjing Tech University
Education•Nanjing, China•
About: Nanjing Tech University is a education organization based out in Nanjing, China. It is known for research contribution in the topics: Catalysis & Membrane. The organization has 21827 authors who have published 21794 publications receiving 364050 citations. The organization is also known as: Nangongda & Nánjīng Gōngyè Dàxúe.
Topics: Catalysis, Membrane, Adsorption, Chemistry, Microstructure
Papers published on a yearly basis
Papers
More filters
••
TL;DR: In this article, the I-V hysteresis behavior of organic-inorganic hybrid perovskite solar cells (PSCs) is investigated and the possible reasons leading to this phenomenon are explored.
Abstract: Organic–inorganic hybrid perovskite solar cells (PSCs) have become a promising candidate in the photovoltaic field due to their high power conversion efficiency and low material cost. However, the development of PSCs is limited by their poor stability under practical conditions in the presence of oxygen, moisture, sunlight, heat, and the current–voltage (I–V) hysteresis. In particular, the hysteretic I–V issue casts doubt on the validity of the photovoltaic performance results that are achieved, making it difficult to evaluate the authentic performance of PSCs. This review article focuses on understanding the I–V hysteresis behavior in PSCs and on exploring the possible reasons leading to this hysteresis phenomenon. The various strategies attempted to suppress the I–V hysteresis in PSCs are summarized, and a brief future recommendation is provided.
221 citations
••
TL;DR: In this paper, a series of ferrite/Co/porous carbon materials were prepared by the situ-thermal carbonization of ZIF-67 under N 2 atmosphere, and the microwave absorption properties have also been investigated.
220 citations
••
TL;DR: In this article, an oxygen ion-proton-electron-conducting nanocomposite, BaCo0.7(Ce0.8Y0.2)0.3O3-δ (BCCY), derived from a self-assembly process, was used as a high-performance protonic ceramic fuel cell (PCFC) or mixed O2−/H+ dual-ion conducting fuel cell cathode.
220 citations
••
TL;DR: In this paper, a comprehensive review of the latest advances in the development of SOFC cathodes is presented: complex oxides without alkaline earth metal elements (because these elements could be vulnerable to phase segregation and contaminant poisoning). Various strategies are discussed for enhancing ORR activity while minimizing the effect of contaminant on electrode durability.
Abstract: Solid oxide fuel cells (SOFCs) represent one of the cleanest and most efficient options for the direct conversion of a wide variety of fuels to electricity. For example, SOFCs powered by natural gas are ideally suited for distributed power generation. However, the commercialization of SOFC technologies hinges on breakthroughs in materials development to dramatically reduce the cost while enhancing performance and durability. One of the critical obstacles to achieving high-performance SOFC systems is the cathodes for oxygen reduction reaction (ORR), which perform poorly at low temperatures and degrade over time under operating conditions. Here a comprehensive review of the latest advances in the development of SOFC cathodes is presented: complex oxides without alkaline earth metal elements (because these elements could be vulnerable to phase segregation and contaminant poisoning). Various strategies are discussed for enhancing ORR activity while minimizing the effect of contaminant on electrode durability. Furthermore, some of the critical challenges are briefly highlighted and the prospects for future-generation SOFC cathodes are discussed. A good understanding of the latest advances and remaining challenges in searching for highly active SOFC cathodes with robust tolerance to contaminants may provide useful guidance for the rational design of new materials and structures for commercially viable SOFC technologies.
220 citations
••
TL;DR: In this paper, a green solvent of ethyl acetate was used for perovskite and hole transport layer (HTL) optimization to achieve a state-of-the-art performance.
Abstract: Organic–inorganic hybrid halide perovskite solar cells (PSCs) have recently drawn enormous attentions due to their impressive performance (>22%) and low temperature solution processability (<150 °C). Current solution process involves application of a large amount of toxic solvents, such as chlorobenzene, which is heavily employed in both the perovskite layer and the hole transport layer (HTL) deposition. Herein, this study employs green solvent of ethyl acetate for engineering efficient perovskite and HTL layers, which enables a synergic interface (perovskite/HTL) optimization. A champion efficiency of 19.43% is obtained for small cells (0.16 cm2 with mask) and over 14% for large size modules (5 × 5 cm2). The PSCs prepared from the green solvent engineering demonstrate superior performance on both efficiency and stability over their chlorobenzene counterparts. These enhancements are ascribed to the in situ inhibition on carrier recombination induced by interfacial defects during the solution processing, which enables about 2/3 reduction of calculated recombination rate. Thus, the green solvent route shows the great potential toward environmental-friendly manufacturing.
220 citations
Authors
Showing all 22047 results
Name | H-index | Papers | Citations |
---|---|---|---|
Yi Chen | 217 | 4342 | 293080 |
Richard H. Friend | 169 | 1182 | 140032 |
Hua Zhang | 163 | 1503 | 116769 |
Wei Huang | 139 | 2417 | 93522 |
Jian Zhou | 128 | 3007 | 91402 |
Haiyan Wang | 119 | 1674 | 86091 |
Jian Liu | 117 | 2090 | 73156 |
Lain-Jong Li | 113 | 627 | 58035 |
Hong Wang | 110 | 1633 | 51811 |
Jun-Jie Zhu | 103 | 754 | 41655 |
Stefan Kaskel | 101 | 705 | 36201 |
Hong Liu | 100 | 1905 | 57561 |
Dirk De Vos | 96 | 642 | 33214 |
Peng Li | 95 | 1548 | 45198 |
Feng Liu | 95 | 1067 | 38478 |