scispace - formally typeset
Journal ArticleDOI

Utilization of sewage sludge in EU application of old and new methods—A review

TLDR
In this article, the authors review past and future trends in sludge handling, focusing mainly at thermal processes (e.g. pyrolysis, wet oxidation, gasification) and the utilization of sewage sludge in cement manufacture as a co-fuel.
Abstract
The European Union has made progress in dealing with municipal wastewater in individual countries and as a corporate entity. However, it intends to make still further and substantial progress over the next 15 years. Currently, the most widely available options in the EU are the agriculture utilization, the waste disposal sites, the land reclamation and restoration, the incineration and other novel uses. The selection of an option on a local basis reflects local or national, cultural, historical, geographical, legal, political and economic circumstances. The degree of flexibility varies from country to country. In any case sludge treatment and disposal should always be considered as an integral part of treatment of wastewater. There is a wide range of other uses for sludge, which exploit its energy or chemical content, namely the thermal processes. The present paper sought to review past and future trends in sludge handling, focusing mainly at thermal processes (e.g. pyrolysis, wet oxidation, gasification) and the utilization of sewage sludge in cement manufacture as a co-fuel.

read more

Citations
More filters
Journal ArticleDOI

Catalytic Pyrolysis of Rice Husk via Semi-Batch Reactor Using L9 Taguchi Orthogonal Array

TL;DR: In this paper, the optimization condition in producing bio-oil from rice husk by catalytic pyrolysis process was studied and the effect of catalyst type (H-β, H-Y, HZSM-5), catalyst loading (1wt, 5wt, 12wt), temperature (400-500°C) and flow rate (60-100ml/min) were investigated through repetitive experiments using L9 Taguchi Orthogonal Array.
Journal ArticleDOI

Evaluating Solidification Characteristics of Textile Dyeing Sludge with Addition of Portland Cement and Attapulgite

TL;DR: In this article, sludge from textile wastewater treatment plant was solidified by Portland cement and attapulgite at different mass ratios (sludge 0.1~0.8, cement 0.3:0.6), and the characteristics of the solidified blocks were evaluated.
Journal ArticleDOI

How to avoid evaporation during rheological measurements of dewatered pasty sludge at high temperature.

TL;DR: This work gives a method to control the evaporation at high temperature that can be used with any commercial rheometer and is confirmed at different total solid contents ranging from 20 to 47 wt.
Journal ArticleDOI

Increasing thermal drying temperature of biosolids reduced nitrogen mineralisation and soil N2O emissions

TL;DR: Overall, thermal drying temperature had a significant influence on N availability from the AD biosolids, but drying did not improve the N availability of these biosolid in any case.
References
More filters
Journal ArticleDOI

Sequential extraction procedure for the speciation of particulate trace metals

TL;DR: In this paper, an analytical procedure involving sequential chemicai extractions was developed for the partitioning of particulate trace metals (Cd, Co, Cu, Ni, Pb, Zn, Fe, and Mn) into five fractions: exchangeable, bound to carbonates, binding to Fe-Mn oxides and bound to organic matter.
Book

Wastewater Engineering Treatment Disposal Reuse

TL;DR: Wastewater Engineering: An Overview of Wastewater Engineering, Methods and Implementation Considerations as mentioned in this paper is a good starting point for a discussion of the issues of wastewater engineering. But, it is not a complete survey of the entire literature.
Journal ArticleDOI

Sewage sludge combustion

TL;DR: In this article, a review of the current and future issues related to the combustion of sewage sludge is presented, and a number of technologies for thermal processing of sludge are discussed in three groups, i.e., mono-combustion, cocombustions and alternative processes.
Journal ArticleDOI

Trace metal analysis on polluted sediments

TL;DR: In this article, the authors proposed a standardization with respect to grain size effects, commonly achieved by analyzing the sieve fraction <63μm, which is used to pin point major sources of metal pollution and to estimate the toxicity potential of dredged materials.
Related Papers (5)