Papers published on a yearly basis
Papers
More filters
••
TL;DR: The technique of the generalized MULTIMOORA method is investigated by using the concept of a T‐spherical fuzzy set (T‐SFS), which is the modified idea of a picture fuzzy set to handle awkward and vague information in daily life problems.
Abstract: In this manuscript, the technique of the generalized MULTIMOORA method is investigated by using the concept of a T‐spherical fuzzy set (T‐SFS), which is the modified idea of a picture fuzzy set to handle awkward and vague information in daily life problems. T‐SFS covers the degree of truth, abstinence, and falsity with a rule that the sum of the qth‐powers of all degrees is restricted to the unit interval. Moreover, for examining the interrelationships among any number of T‐SFSs, we construct the idea of T‐spherical fuzzy Dombi prioritized weighted arithmetic (T‐SFDPWA) aggregation operators, T‐spherical fuzzy Dombi prioritized arithmetic, T‐spherical fuzzy Dombi prioritized geometric, and T‐spherical fuzzy Dombi prioritized weighted geometric (T‐SFDPWG) aggregation operators are given. Then, the basic properties of T‐SFDPWA and T‐SFDPWG aggregation operators are investigated and discussed in some of their cases. The investigated operators based on T‐SFS are utilized in the environment of multiattribute decision‐making problems to find the consistency and proficiency of the developed operators. In last, we illustrated some numerical examples based on explored operators is to examine the reliability and validity of the investigated operators with the help of comparative analysis and graphical representations with some existing ideas to show the presented approaches are extensive powerful.
28 citations
••
TL;DR: In this article, the cause of premature failure of an aircraft piston engine was investigated and identified by using finite element analysis of the cylinder assembly of the aircraft engine with aluminum cast cylinders.
27 citations
••
TL;DR: Based on Reddy's first-order shear deformation theory, the nonlinear dynamic response and vibration of imperfect functionally graded carbon nanotube-reinforced composite (FG CNTRC) circular cylindr...
Abstract: Based on Reddy’s first-order shear deformation theory, the nonlinear dynamic response and vibration of imperfect functionally graded carbon nanotube-reinforced composite (FG CNTRC) circular cylindr...
27 citations
••
TL;DR: An air-breathing direct formic acid microfluidic fuel cell, which had a self-made anode electrode of 10 mg/cm2 Pd loading and 6 mg/ cm2 Nafion content, was fabricated and tested by bonding a PDMS microchannel and a PMMA sheet that was machined by a CO2 laser for obtaining 50 through holes of 0.5 mm in diameter as discussed by the authors.
Abstract: An air-breathing direct formic acid microfluidic fuel cell, which had a self-made anode electrode of 10 mg/cm2 Pd loading and 6 mg/cm2 Nafion content, was fabricated and tested. The microfluidic fuel cell was achieved by bonding a PDMS microchannel that was fabricated by a soft-lithography process and a PMMA sheet that was machined by a CO2 laser for obtaining 50 through holes of 0.5 mm in diameter. Formic acid of 0.3 M, 0.5 M, and 1.0 M, mixed with 0.5-M H2SO4, was supplied at a flow rate ranging from 0.1 to 0.7 mL/min as fuel. The maximum power density of the fuel cell fed with 0.5-M HCOOH was approximately 31, 32.16, and 31 mW/cm2 at 0.5, 0.6, and 0.7 mL/min, respectively. The simultaneous recording of the flow in the microchannel and the current density of the fuel cell at 0.2 V, within a 100-s duration, showed that the period and amplitude of each unsteady current oscillation were associated with the bubble resident time and bubble dimension, respectively. The effect of bubble dimension included the longitudinal and transverse bubble dimension, and the distance between two in-line bubbles as well.
27 citations
••
TL;DR: In this article, the virtual work theorem is used to derive the equation of motion for antisymmetric cross-ply laminates in a general state of non-uniform initial stress, where the effects of transverse shear and rotary inertia are included, and the equations are adjusted to a generic expression by using proper transformations.
27 citations
Authors
Showing all 2478 results
Name | H-index | Papers | Citations |
---|---|---|---|
Kamil Kuca | 55 | 1029 | 16708 |
Antoni Rogalski | 47 | 286 | 11516 |
Ufuk Gündüz | 44 | 206 | 6560 |
George P. Patrinos | 43 | 353 | 8785 |
Ching-Hsue Cheng | 42 | 209 | 8222 |
Saad M. Alshehri | 42 | 280 | 6179 |
Roman Dabrowski | 38 | 469 | 6415 |
Daniel Jun | 37 | 287 | 5505 |
Susheel Kalia | 36 | 105 | 6984 |
Dragan Pamučar | 36 | 194 | 4519 |
Turgay Celik | 35 | 508 | 5417 |
Janice D. Yoder | 33 | 81 | 3486 |
Miodrag Čolić | 32 | 212 | 3894 |
T. C. T. Ting | 32 | 121 | 9662 |
Manuela Tvaronavičienė | 31 | 153 | 2832 |