scispace - formally typeset
Journal ArticleDOI

Oxide Semiconductor Thin‐Film Transistors: A Review of Recent Advances

Elvira Fortunato, +2 more
- 12 Jun 2012 - 
- Vol. 24, Iss: 22, pp 2945-2986
TLDR
The recent progress in n- and p-type oxide based thin-film transistors (TFT) is reviewed, with special emphasis on solution-processed andp-type, and the major milestones already achieved with this emerging and very promising technology are summarizeed.
Abstract
Transparent electronics is today one of the most advanced topics for a wide range of device applications. The key components are wide bandgap semiconductors, where oxides of different origins play an important role, not only as passive component but also as active component, similar to what is observed in conventional semiconductors like silicon. Transparent electronics has gained special attention during the last few years and is today established as one of the most promising technologies for leading the next generation of flat panel display due to its excellent electronic performance. In this paper the recent progress in n- and p-type oxide based thin-film transistors (TFT) is reviewed, with special emphasis on solution-processed and p-type, and the major milestones already achieved with this emerging and very promising technology are summarizeed. After a short introduction where the main advantages of these semiconductors are presented, as well as the industry expectations, the beautiful history of TFTs is revisited, including the main landmarks in the last 80 years, finishing by referring to some papers that have played an important role in shaping transparent electronics. Then, an overview is presented of state of the art n-type TFTs processed by physical vapour deposition methods, and finally one of the most exciting, promising, and low cost but powerful technologies is discussed: solution-processed oxide TFTs. Moreover, a more detailed focus analysis will be given concerning p-type oxide TFTs, mainly centred on two of the most promising semiconductor candidates: copper oxide and tin oxide. The most recent data related to the production of complementary metal oxide semiconductor (CMOS) devices based on n- and p-type oxide TFT is also be presented. The last topic of this review is devoted to some emerging applications, finalizing with the main conclusions. Related work that originated at CENIMAT|I3N during the last six years is included in more detail, which has led to the fabrication of high performance n- and p-type oxide transistors as well as the fabrication of CMOS devices with and on paper.

read more

Citations
More filters
Journal ArticleDOI

Inkjet printing of oxide thin film transistor arrays with small spacing with polymer-doped metal nitrate aqueous ink

TL;DR: In this paper, the authors investigated the performance of printed oxide TFT arrays by inkjet printing with small spacing, aiming at printing high resolution display backplanes, and they found that by hydrophobic treatment of the substrate surface with hexamethyldisilazane (HMDS) and octadecyltrichlorosilane (OTS) assembly, the minimum spacing (center-to-center distance) of the printed oxide dot array was reduced from over 80 μm to 45 μm and 35 μm (OTS treated), while the dot diameters simultaneously
Journal ArticleDOI

Low temperature characteristics in amorphous indium-gallium-zinc-oxide thin-film transistors down to 10 K

TL;DR: In this paper, the authors report on the characteristics of amorphous indium-gallium-zincoxide thin-film transistors (TFTs) in the temperature range of 10-300
Journal ArticleDOI

Memristors Using Solution-Based IGZO Nanoparticles

TL;DR: Solution-based indium–gallium–zinc oxide nanoparticles deposited by spin coating have been investigated as a resistive switching layer in metal–insulator–metal structures for nonvolatile memory applications and are potential candidates for the integration of memory functionality into low-cost System-on-Panel technology.
Journal ArticleDOI

Chemical Design and Example of Transparent Bipolar Semiconductors.

TL;DR: This work proposes a design concept with three strategies; choice of early transition metals (eTM) such as Y3+ and Zr4+ for improving controllability of carrier doping, design of chemical bonds to obtain an appropriate band structure for bipolar doping, and use of a forbidden band-edge transition to retain transparency.
Journal ArticleDOI

Preparation of transparent and conductive cellulose nanocrystals/graphene nanoplatelets films

TL;DR: In this article, the authors report on the demonstration of polymer solar cells fabricated on optically transparent and conductive graphene nanoplatelets (GNPs) -cellulose nanocrystals (CNC) film.
References
More filters
Journal ArticleDOI

Room-temperature fabrication of transparent flexible thin-film transistors using amorphous oxide semiconductors

TL;DR: A novel semiconducting material is proposed—namely, a transparent amorphous oxide semiconductor from the In-Ga-Zn-O system (a-IGZO)—for the active channel in transparent thin-film transistors (TTFTs), which are fabricated on polyethylene terephthalate sheets and exhibit saturation mobilities and device characteristics are stable during repetitive bending of the TTFT sheet.
Book

Semiconductor Material and Device Characterization

TL;DR: In this article, the authors present a characterization of the resistivity of a two-point-versus-four-point probe in terms of the number of contacts and the amount of contacts in the probe.
Journal ArticleDOI

High-κ gate dielectrics: Current status and materials properties considerations

TL;DR: In this paper, a review of the literature in the area of alternate gate dielectrics is given, based on reported results and fundamental considerations, the pseudobinary materials systems offer large flexibility and show the most promise toward success.
Journal ArticleDOI

Organic Thin Film Transistors for Large Area Electronics

TL;DR: In this article, the authors present new insight into conduction mechanisms and performance characteristics, as well as opportunities for modeling properties of organic thin-film transistors (OTFTs) and discuss progress in the growing field of n-type OTFTs.
Journal ArticleDOI

Polymer‐Fullerene Bulk‐Heterojunction Solar Cells

TL;DR: An outlook is presented on what will be required to drive this young photovoltaic technology towards the next major milestone, a 10% power conversion efficiency, considered by many to represent the efficiency at which OPV can be adopted in wide-spread applications.
Related Papers (5)